Micro coils
Audemars is specialized in providing custom micro-coil solutions for a variety of applications. We have specialized equipment capable of winding ultra-fine wire as thin as 10 micron and producing coils as small as 0.5mm Ø. Coils can be designed with or without cores in a variety of materials... Read more »
Micro components
With over a century of experience in micro-components, Audemars develops unique processes, techniques, tooling and equipment to manipulate and assemble the smallest electro-mechanical components. Please contact us to learn how we can realize your custom micro-component requirement utilizing our... Read more »
Micro Components / Electrodes
As complex medical devices need to be miniaturized to reach restricted areas in the human body, the stakes get bigger. Micromachining is more than just producing smaller parts and components…it’s about increasing capabilities and performance. As one of the world’s leaders in precious metals and... Read more »
Micro Flow Sensor for Ultra Low Gas Flow
The IST AG MicroFlowSens (MFS) technology was developed for fast flow measurements. Due to the membrane system, the thermal mass is reduced to the minimum resulting in a very fast response time and low power consumption. In addition to measuring flow rates, the MicroFlowSens offers an outstanding... Read more »
Micro Lenses
Submillimeter optical lenses as small as 0.20 mm are ground and polished in a variety of difficult configurations, including plano convex, plano concave, bi-concave, bi-convex, as well as positive and negative meniscus. Created from optical and filter glasses, these microscopic elements – some... Read more »
Micro magnets
Fitting the strongest force in the smallest, most precise dimensions – even smaller than 0.5mm! Audemars is highly specialized in the execution of permanent magnets of the smallest dimensions and tightest tolerances using the highest quality Neodymium (NdFeB) and Samarium-Cobalt (Sm1Co5 and... Read more »
Micro Miniature EDM
Manufacturer of complex EDM micro, miniature and small parts for medical, semi-conductor, aerospace and aircraft and aerospace EDM parts on all hard and tough materials machined to your specifications. Extreme close tolerance detailed machining to precision specifications and diameters in... Read more »
Micro Mold Parts
Micromold, micromolding, micro mold, minature parts... no matter how you spell it, Accumold is number one in tooling and manufacturing micro size parts and components. Micro-sized parts are produced in our own micro-molding machines, utilizing processes that we started our business with over 20... Read more »
Micro Molding
Micro Molding Rubber at Da/Pro Rubber Medical, Electronics, and Consumer Goods industries are continually manufacturing smaller devices. The demand for micro molding has increased significantly. As the demand increases the need for quality and tight tolerances also increases. Da/Pro has... Read more »
Micro Molding
With over 30 years’ experience and thousands of projects, Isometric Micro Molding can achieve tight micron tolerances and greater project success by designing, building, molding, and assembling the complete micro solution for your project – all in-house. Isometric’s highly specialized... Read more »
Micro Prisms
Submillimeter micro optical prisms with dimensions to 0.20 mm for use in laparoscopic and endoscopic medical devices. These precision elements can be custom engineered, ground and polished in a variety of difficult configurations, including optical wedges of any given angle, beam splitter... Read more »
Micro Riffler
The Rotary Micro Riffler easily and automatically divides larger samples into eight smaller representative samples for analysis. By repetitive division of the collected smaller representative samples, the desired final sample size may be obtained. The Rotary Micro Riffler has two basic... Read more »
Micro Spheres/Balls
Exceptionally accurate optical ball lenses as small as 0.20 mm in diameter for use in laparoscopic, endoscopic and other medical devices. They can be custom engineered, ground and polished to micron tolerances. Created from optical and filter glasses, these precision spheres – some as... Read more »
Micro Windows
Exceptionally accurate optical windows as small as 0.20 mm in diameter for use in laparoscopic, endoscopic and other medical devices. They can be custom engineered, ground and polished to micron tolerances in a wide variety of standard or custom shapes and submillimeter diameters. Created... Read more »
Microbiological Environmental Monitoring
Technical Safety Services, Inc. offers environmental monitoring services to assist our clients with their critical cleanroom and controlled environment quality assurance programs. We support our client's environmental monitoring needs by offering flexible, comprehensive monitoring programs that... Read more »
Microbiology Services
Incorporating broad based technical knowledge of FDA, EPA, International and Client Custom programs, Consumer Product Testing Co.’s Microbiological Division provides unique capabilities. With expertise in the cosmetics / personal care, pharmaceutical, medical device and specialty chemical... Read more »
Microbiology Testing
An important part of the manufacturing process for medical devices is determining the level and nature of viable microorganisms that are generated as a result of the process. By developing and following a routine, documented sampling plan, you are assured that your process remains under... Read more »
Microbiology/Chemical Testing
Located in Warsaw, Indiana, Element Warsaw has broad microbiological and chemical analysis capabilities. With a recent relocation to a 15,000 sq ft facility, Element Warsaw has expanded its laboratory capabilities and specificity. Additional expansion within the new facility also includes ISO Class... Read more »
MicroCare Medical Wipes and Swabs
MicroCare Medical is a leader in lint-free wipes and swabs used for critical cleaning applications. There are three major considerations to be evaluated when selecting wipes: 1. Target the wipe to the cleaning fluids and the contamination. Some wipes will not absorb water; others work better with... Read more »
Microcatheters
You can count on TELEFLEX MEDICAL OEM for microcatheters for exceptional torque control, kink and pressure resistance, lubricity, and push-ability. Whether you require PTFE lined, multiple durometer, variable shaft diameter, imbedded marker bands, or thin wall construction, Teleflex Medical OEM... Read more »
MicroCoat® Lubrication Systems
The MicroCoat is a different type of stock lubrication system that lets metal stampers apply the perfect amount of oil for each job. The MicroCoat is a non-contact system that applies oil as a fine, consistent film that provides complete coverage using less oil. Read more »
Microcoils
Designed for use in medicine (cardio-navigation catheters), as well as for microcoolers used in electronic circuits for miniature thermal generators or thermal radiation sensors. There is equipment and technology for manufacturing micro-coils, sensors, as well as individual assembly units and the... Read more »
microDL -200C Cryogenic Temperature Data Logger
These high-precision laboratory-grade products will operate up to 3 years without a battery change. View current and stored data, prior to downloading to a computer, by scrolling through the screen displays, including high, low, elapsed time, alarm excursions and Mean Kinetic Temperature. Monitor... Read more »
MicroDose Unit Dose Dispenser
This patented unique unit-dose dispenser combines the convenience and accuracy of a syringe with the simplicity of a tube, and the disposability of a vial or ampoule. Read more »
MicroFluidics
Controlling Fluid Behavior with Advanced Materials and Processes Microfluidic is the science of designing, manufacturing, and formulating devices and processes that deal with volumes of fluid on the order of nano liters. Fralock’s combination of extensive materials expertise and precision... Read more »
Microincinerator - For Microbiologists
A microincinerator you can touch ! •Sterilization After reaching a sterilization temperature of around 1000°C, loop and needle are sterilized in 2-4 seconds. •Supports Working with Gloves With it’s unique design the temperature of the exterior surface does not exceed 30ºC.* •Sterilization in... Read more »
MicroJet™ EC
Austin American Technology's MicroJet™ EC breakthrough advances in cleaning technology bring Progressive Energy Dynamics to the MicroJet EC In-line Cleaning System resulting in cleaning power unequalled in its class. Developed using complex modeling techniques, this innovative approach to cleaning... Read more »
MicroJet™ FC
Austin American Technology's MicroJet™ FC breakthrough advances in cleaning technology bring Progressive Energy Dynamics to the MicroJet™ FC In-line Cleaning System resulting in class-leading cleaning power. Developed using complex modeling techniques, this innovative approach to cleaning ensures... Read more »
Microlab® 600 Stand Alone Syringe Pump
Take full command of your diluting and dispensing applications with the Microlab 600 standalone syringe pump. With ethernet and RS-232 communication capabilities, the standalone syringe pump allows you to custom program methods and deploy commands to any instrument on your network from anywhere in... Read more »
Micromachined Products
For companies in the dental and medical technology sector, Cendres+Métaux Medical produces micromechanical, customer-specific (OEM) components out of high-quality materials characterized by a high degree of purity, homogeneity and Swiss precision. Read more »
Micro-Machined Solutions for the Medical Industry
The medical device industry is in a period of rapid growth. Companies are demanding parts with greater precision and more complex geometries in order to stay competitive. It is in this environment that DM2 thrives because we are committed to holding ourselves to the highest standards. Our medical... Read more »
Micromolding
PTI's micromolding offers you a low-cost, short-lead-time process for small parts, and it cuts your time to market in half while producing cost savings up to 40%. The micromolding process is designed to meet the needs of customers in a number of market segments including medical,... Read more »
Micron 2 (µII) Motion Systems
ALIO has introduced its new Micron 2 (µII) motion systems family to compete in the micron-level motion control market, where the demand is for low-cost, mid-precision, reliable, long travel stages. As with all ALIO’s Micron 2 (µII) motion systems are designed using the company’s uncompromising... Read more »
Microscope for assembly
Jenco non-illuminated Post and Boom Stands • Heavy duty - designed to provide adequate support for many years • Freedom of movement in multiple directions to facilitate inspection of large samples • Rugged structure - minimizes vibration/tipping, even with camera attached to trinocular head Read more »
MIE Trak Pro
MIE Trak Pro™ is an ERP system that integrates all business processes from your warehouse to your front office to your mobile device.MIE Trak Pro Offers… • Quoting/Estimating • Sales Order • Work Order • Scheduling • Purchase Order • Inventory • Quality • Data Collection • Kiosk •... Read more »
MightyMount
“The Light Industrial Mounting That’s HEAVY Duty” The MightyMount defines a category of its own and is easily differentiated from common “computer store grade” keyboard and display mountings. MightyMount’s dual-axis pivot points and vertical articulation allow the monitor and keyboard to be... Read more »
Mikron EcoLine
Mikron EcoLine is based on the use of standard modules which offer flexibility and modularity. The Mikron EcoLine is available in single module and double module base machines. These machines can be linked side by side or back to back to optimize the layout for the production facility. The primary... Read more »
Mikron G05
The Mikron G05™ linear assembly cell is based on the use of standardized building blocks which offer flexibility and modularity. The proven and stable Mikron G05 platform ensures speed, precision and reliability of your automation solution. The platform makes use of a cam drive for all primary... Read more »
Mikron Polyfeed
You can count on it for unmatched flexibility, short delivery time, reusability and speed. Mikron Polyfeed is a flexible feeding system based on the use of visual recognition and vertical vibration systems to identify parts in their various forms and positions. The feeding speed can reach 80... Read more »
Mikron Tray Handler
Mikron supplies a highly standardized tray handler capable of dealing with a range of applications from single tray to multiple stack, for tray sizes from 300 x 400 to 400 x 600 mm, and designed for parts that are susceptible to damage or contamination if fed using other methods such as bowl... Read more »
MIL/Aero/Defense Testing
CMG provides first article and qualification testing for military, aerospace, and defense sectors to specific requirements. Unlike other labs, we do more than simply pass or fail the product's performance. Our engineers aid in the complete process of testing, identifying issues, providing... Read more »
Military Testing
D.L.S. can assist you with your EMI and Environmental MIL-STD requirements. We can perform revisions A-g\G of MIL-STD 461, MIL-STD-704, and MIL-STD 810 through revision G. Our large labs and power capabilities are sure to accommodate your needs. Read more »
Mil-Std Testing
Advanced Compliance Solutions is one of the most comprehensive testing laboratories in the industry, and with the recent acquisition of Rubicom Systems, we’re pleased to announce the addition of a full suite of MIL-STD testing capabilities. Whether you’re looking for MIL-STD 461, or other MIL-STD... Read more »
Mini Blood Component Detector
INTROTEK® optical sensing technology is designed to detect fluid on clear tubing in a variety of critical processes. Unwanted elements in fluid can be detected in order to ensure the safety of a procedure or process. Read more »
Miniature Solenoid Valve Line
Peter Paul manufactures a low-cost, miniature solenoid valve line with similar performance characteristics to more costly valves, while maintaining the high quality operating features found in all Peter Paul products. Peter Paul valves can be found in medical gas instrumentation systems as well as... Read more »
Miniature Solenoid Valves
We offer a comprehensive portfolio of IMI FAS on/off (digital) solenoid valves, including the IMI FAS 6.5mm FLEXISOL, our smallest valve. Our solenoid valves perfectly suit applications where performance, reliability and ease of integration are crucial. Read more »
Mini-BI Spore Strips
24 month shelf life Each pack contains 100 spore strips. Biological Indnicator Spore strips consist of filter paper, 2mm x 10mm, inoculated with eitherGeobacillus stearothermophilus spores for use in monitoring steam sterilization processes or Bacillus atrophaeus for monitroing EO or Dry Heat... Read more »
MINICONSOLE
The MiniConsole is the ideal workstation for any process area. The keyboard and display mimic the ergonomics of a laptop but in an industrial package. Choose from swivel, fixed, and mobile mounting options. NEMA Type 4 and 12 units are manufactured from powder carbon steel, and NEMA Type 4X units... Read more »
MiniMed 507 Insulin Pump (now Medtronic)
When they first engaged RKS, MiniMed was stumped. Adoption rates on their insulin pumps, which could significantly increase both the quality and quantity of life, were low. Why wouldn’t people choose a treatment option that was significantly more effective against a deadly disease? RKS approached... Read more »
Miyano Models
We offer cutting-edge solutions to enhance your machining operations, including our proprietary software WinCNC, which is tailored for precision-driven businesses. WinCNC is uniquely designed for Miyano users, enabling efficient CNC programming by editing up to three programming systems... Read more »
