Plastics Testing
Exceptional polymer analysis and non-metallic testing with your requirements in mind. The Polymer Analysis Department, equipped with state-of-the-art equipment for polymer analysis and characterization, is supported by numerous resources, capable of evaluating routine materials to complex failure... Read more »
Plate - Special Purpose Metals and Alloys
If you need specialty metals or alloys plate for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of plate products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut back on your... Read more »
Platelet Rich Plasma Separation Device
The Magellan is a device that separates PRP (platelet rich plasma) from whole blood. KDI provided DFM and manufacturing for these sub-assemblies: Custom centrifuge Syringe pumps – 2 sizes Auto – locking latch Guide for blood flow tubing After one year, KDI took over production... Read more »
Platinum Resistance Temperature Probe
IST’s RealProbeTemp is a pre-assembled stainless steel probe containing a 100 Ω platinum thin film RTD temperature element with an operating range from -50°C to +200°C. The probe sheath is tip sensitive, providing superb response times (T90 < 1.5s in water at 0.4m/s) and the ability to measure in... Read more »
Platinum Temperature Sensor
IST platinum temperature sensors provide solutions for extreme temperature applications. IST products are designed with the highest quality materials, allowing them to operate within a temperature range of -200°C to +1000°C. Standard DIN 60751 sensors are offered in class B (0.12%), class A... Read more »
Plexiglas® acrylic resins
We offer a variety of resins including: - Plexiglas® V Grade exceptional clarity & resistance to UV light degradation and discoloration - Plexiglas® Impact modified toughness, heat resistance and processability - Plexiglas® Frosted minimize visual defects... Read more »
Plexiglas® Cell Cast Sheet
Plexiglas® cell cast sheet is a premium cell cast sheet that can be used in a variety of applications such a POP displays, signage, framing, incubators and aerospace applications. The materials allow for a broad range of design considerations that allow you the flexibility needed in your... Read more »
Plexiglas® Extruded Sheet
Plexiglas® extruded sheet is a premium melt calendared sheet that can be used in a variety of applications such a POP displays, signage, framing, rear projection screen, and skylight applications, among others. The materials allow for a broad range of design considerations that allow you the... Read more »
Plexiglas® V-grade acrylic resins
Plexiglas® V-grade acrylic resins afford exceptional optical clarity and resistance to UV light degradation and discoloration making them the industry standard for applications where outdoor and indoor weatherability is paramount. The resins are characterized by superior thermal stability,... Read more »
PM100
Compact, open PCB constructed AC-DC switching power supplies capable of delivering 100 watts of continuous output power at convection cooling. They are suited for medical, information technology and industrial applications, but not for life-supporting medical equipment. Approval to both EN60601-1... Read more »
PM1000 - PouchMan Automatic Pouch Systems
The PouchMan PM1000 is an automatic pouching system that opens a pre-made pouch, presents it for product loading, seals it, and discharges it for further process. It is ideal for pouching medical devices, pharmaceuticals, and much more.. Read more »
PM110
These compact, open PCB constructed, AC-DC switching power supplies are specially designed for medical applications. They are capable of delivering 72 to 110 watts of continuous power at 25 CFM forced air cooling or 80 watts at convection cooling. They operate at 85 to 264 VAC input voltage without... Read more »
PM201
The PM201 series comprising single and multiple output models for 150 to 200 watts of continuous output power is specially designed for medical applications not for life support. They operate at 90-264VAC input voltage without the need of a selector strap. All auxiliary outputs are with magnetic... Read more »
PM202
The PM202 series of AC-DC switching power supplies in a pacakge of 3x5x1.5" are capable of delivering 200 watts of continuous power at 5.3 CFM forced air cooling or 150 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat... Read more »
PM25
Compact, PCB constructed AC-DC switching power supplies are capable of delivering 25 to 28 watts of continuous output power. Ideally suited for use in medical equipment, safety systems and monitoring equipment, not for life support. Read more »
PM300
The PM300 series comprising single and multiple output models for 200 to 300 watts of continuous output power is specially designed for medical applications not for life support. They operate at 90 to 240VAC input voltage without the need of a selector strap. All auxiliary outputs are with magnetic... Read more »
PM42
The PM42 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 30-48 watts of continuous output power at convection cooling. They operate at 90-264 VAC input voltage without the need of voltage selection, and are suited for medical,... Read more »
PM450
The PM450 series comprising single and multiple output models for 450-480 nwatts of continuous output power is specially designed for medical applications not for life support. They operate at 90 to 264VAC input voltage without the need of a selector strap. The units are constructed on a printed... Read more »
PM60
The PM60 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 37.5-64 watts of continuous output power at convection cooling. They operate at 90-264 VAC input voltage without the need of voltage selection, and are suited for medical,... Read more »
PM650
The PM650 Series have a power factor corrected universal input and single, dual and triple output models with versatile attributes of floating and adjustable output voltages. Either U-bracket or enclosed (with recessed internal fan) mechanical configurations are packaged in a 10.5" x 5" x 2.5"... Read more »
PMP120
The PMP120 series of AC/DC switching power supplies are for 96-120 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC... Read more »
PMP135
The PMP135 series of AC/DC switching power supplies are for 120-135 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC... Read more »
PMP15
The PMP15 series of AC/DC wallmount switching power supplies are for 15 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with four types of interchangeable AC plugs: European plug, UK plug and North American plugs. All models meet EN55011 and FCC class B... Read more »
PMP150
The PMP150 series of AC/DC switching power supplies are for 132-150 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC... Read more »
PMP180
The PMP180 series of AC/DC switching power supplies are for 180 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C8 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC class... Read more »
PMP31
The PMP31 Series of AC/DC switching power supplies provide 25-30 watts of continuous output power. They are enclosed in a a 94V-1 rated polyphenylene-oxide case with an inlet of the IEC320/C14 to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission... Read more »
PMP60
The PMP60 series of AC/DC switching power supplies are for 30-60 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC class B emission... Read more »
PMP90
The PMP90 series of AC/DC switching power supplies are for 60-90 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with an interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC... Read more »
Pneumatic Grippers
AGI pneumatic grippers have a wide range of sizes, jaw styles, and gripping forces for most any industrial application. Robotic grippers range from miniature series to units that have 1500 lbs. of gripping force. The three major types of pneumatic grippers are parallel gripper, angular gripper... Read more »
Pneumatic Linear Actuators
AGI has a full line of pneumatic linear actuators that are internally powered. The three styles are base slides, magnetically coupled rodless slides, thrusters and pneumatic actuators. The units provide smooth linear motion due to the precision ball bearings riding on hardened ground shafts. The... Read more »
Pneumatic Solutions for Medical Devices
Standard and custom Pneumadyne products are used in pneumatic control systems throughout the medical industry. From small hand-held tools to larger operatory circuits, medical device manufacturers rely on our experience and expertise when integrating pneumatics into their equipment. Our miniature... Read more »
PNR 12 Penetrometer
Petrolab Company offers the Petrotest® PNR 12 Penetrometer that utilizes a fully automatic surface detection system. The instrument offers two surface detection technologies—force measurement and conductivity—that can be used together or independently to precisely position the test probe, depending... Read more »
Point Source Emitters
The Marktech Point Source Emitter series incorporates a specially designed LED die and aperture window to create a precise, unobstructed light output pattern. The key design feature of the Point Source LED die is a wire bond which attaches next to the emission window as opposed to the center of the... Read more »
Polarising Box
The Polarising Box is used to view the stress points created during manufacture of clear plastic and glass products.The samples can also be extruded film. The Polarising Box has two open sides so long items can be passed through. • Polarising Filter mounted at the top for viewing • Light Source... Read more »
Poly Tubing
2 Mil Tubing Make bags of any length in just seconds! Simply cut to desired length, insert product, and heat seal, staple, or tape closed. Sizes range from 3" - 48" in gauges 1mil - 4mil. Don't see what you're looking for? We'll make it to your exact specification. We love custom orders!! Read more »
Polydek® Sutures
A light coating of PTFE gives this tightly-braided, polyester suture handling and knotting characteristics similar to silk. Characteristics: Polydek® exhibits easy handling, outstanding tensile strength, lubricity, and a reduced risk of wicking and tissue reactivity. Material: Polyester... Read more »
PolyDyne™ Corona Treating System
PolyDyne™ is the most versatile and efficient system in 3DT’s product line. It is specifically suited for use in high-speed printing, assembly, extrusion and coating lines. PolyDyne applies corona discharge to the exact part needed and thereby increases adhesive properties. PolyDyne can be... Read more »
Polymer Distribution
Avient Distribution delivers world-class product, process, and supply chain services. We have created an experienced team dedicated to assisting you with design, material selection, processing, manufacturing and supply chain challenges. Together with our comprehensive portfolio of materials and... Read more »
Polymer Lab Services
NSL’s experience with polymeric materials includes analysis and testing of catalysts, thermal stabilizers, fillers, and pigments in polymers and composite materials. NSL polymer testing lab offers its customers the expertise required to help solve a wide variety of polymer and composite materials... Read more »
Polymer-to-Metal Bonding
Plasmatech’s MicroTIE plasma enhanced chemical vapor deposition (PECVD) coating provides a “green” alternative for bonding or over molding metal components. Surface preparation of metal components prior to bonding incompatible materials may require caustic chemical etchants or other costly... Read more »
Polyurethanes for Bonding, Sealing, Coating & Potting
Polyurethane compounds were developed by Master Bond to solve design, manufacturing and repair/maintenance applications across a broad range of industries. They are especially useful when strength, flexibility, abrasion resistance, fast curing and chemical resistance properties are needed. Read more »
Poremaster
The PoreMaster series consists of three automatic mercury intrusion porosimeters offering new concepts in automated pore size analysis.The PoreMaster 33 porosimeter achieves a maximum pressure of 33,000 psia for pore size measurements in the range from over 950 micron to 0.0064 micron pore... Read more »
Porometer 3G
The POROMETERS 3G micro, 3G macro, 3Gz and 3Gzh are latest generation capillary flow porometers. Using the technique known as liquid expulsion, they measure pore size distributions and other related information of through-pores. In this technique, an increasing pressure is applied to one side of a... Read more »
Portable Medical Diagnostic Equipment Case
THE PROBLEM: Medical personnel require a safe, transportable carrying case to house sensitive equipment that can be used quickly. BACKGROUND: In the past, diagnosis of heart problems required significant time and attention by a doctor or other specialists using bulky equipment. Now, using a single... Read more »
Portable process calibrator
The model CPH7000 process calibrator is a precise, portable calibrator for calibration and testing pressure gauges, transmitters and switches. In addition, external analog transmitters can be powered and read. With the optional Environmental module, barometric pressure, temperature and humidity can... Read more »
Positioning Systems & Actuators
>Linear Slides >Rotary Stages >Linear Actuators >Tilt Stages >Electromechanical Cylinders >Screw Driven Stages Read more »
Post Market Surveillance
We provide comprehensive Post-Market Surveillance (PMS) services to help medical device manufacturers ensure continuous compliance, safety, and performance throughout the product lifecycle. Our PMS activities are aligned with EU MDR 2017/745, IVDR 2017/746, and other applicable global regulations,... Read more »
Post-Molding Assembly Solutions
As your full-service partner, we have both cleanroom and non-cleanroom capacity for your complex assemblies. Our team applies long-standing experience in testing consumables and single-use technologies (SUT) to ensure the integrity and performance of custom engineered products. We also provide a... Read more »
Pouching and Sealing
Contech Medical offers a variety of packaging and sealing solutions for a wide range of medical devices. Produced and assembled in our Class 100,000/ISO Class 8 clean room environment- you never have to worry about quality or value. Packaging services include: Pouching and Sealing Tray Loading... Read more »
Powder Treatment System
The AL200-D Gas Plasma System is designed for treatment of powder, pellet and crystalline materials. A specially designed 5 liter rotating chamber ensures treatment consistency, even when processing very fine powders and compounds. Production systems with larger chambers are also available to... Read more »
