Objective lenses for Synchrotron
ESRF (European Synchrotron Radiation Facility) hired ASE Optics Europe to design and manufacture three unique objective lenses for use in the synchrotron beamlines: 0.5X, 150mm and 400mm. Starting with a Discovery Service, ASE designed and developed the optical system consisting of thorough optical... Read more »
OCXO
Ascend Frequency Devices offers a wide variety of OCXO products, including all the industry standard packages, through-hole or surface mount. This enables our products to be cross referenced into any application. Our precision engineering capabilities enable us to offer tight tolerances that exceed... Read more »
OCXO - Oven Controlled Crystal Oscillators
An OCXO(Oven Controlled Crystal Oscillator)achieves the highest frequency stability possible with a crystal. Typical applications include radio transmitters, cellular base stations, military communications equipment, and precision frequency measurement. Read more »
OEM Torque Sensor
The NEW TorqSense RWT450/460 torque sensors replace the RWT350/360 series and feature all new electronics that have produced significant performance gains in resolution, frequency response, reduced sensor current consumption and faster digital data throughput. Transducer overload has also been... Read more »
OEM Ultrasonic Generator Kits and Stack Components
Sonics ultrasonic kits and stack components can be supplied directly to OEM systems’ integrators for installation into special assembly systems. Kits provide maximum flexibility in terms of system size and design configuration, with resulting savings in system costs and space. Kits and stack... Read more »
Offshoring Consultation
Consults with medical device companies in the set up process for locations in Costa Rica, Nicaragua, El Salvador and other Central American countries. Read more »
OMAP35x SOM-LV
The OMAP35x System on Module (SOM) is a compact, product-ready hardware and software solution that fast forwards embedded designs. Based on Texas Instruments' OMAP 3 processor family and designed in the SOM-LV Type III form factor, the OMAP35x module offers essential features for handheld and... Read more »
OMAP35x Torpedo SOM
Logic PD's Torpedo System on Module (SOM) is an ultra-compact form factor based on Texas Instruments' OMAP35x processor family. The OMAP35x Torpedo SOM provides a dime-sized module solution for applications that require low-power and high-performance within tight space constraints. By using the... Read more »
OMNIA
The OMNIA 8100 series is a family of multi-function electrical safety compliance analyzers that consist of three models. OMNIA 4, model 8104, is a 4-in-1 instrument that provides AC/DC Hipot, Insulation Resistance and 40 Amp Ground Bond/Continuity tests. OMNIA 5, model 8105, is a 5-in-1 instrument... Read more »
OmniCure AC Series Optical Adapters
OmniCure® offers a selection of adapters customized for use with the OmniCure AC Series of high power LED UV curing systems to address a wider range of applications. Attaching to the front face of the OmniCure LED UV systems, the AC Optical Adapters convert a smaller area of high output power into... Read more »
OmniCure AC2 LED Small-Area UV Curing System
OmniCure® AC2 Series offers compact, air-cooled LED UV curing systems for small-area applications. With advanced front-end optics, the AC275 and AC2110 systems deliver over 2.5 W/cm2 peak irradiance with exceptional uniformity. Our patented process for individually addressing each UV LED module... Read more »
OmniCure AC4 LED Small-Area UV Curing System
mniCure® AC4 Series of air-cooled LED UV curing systems are designed with high output LEDs and custom optics to deliver high irradiance of over 8W/cm2 with exceptional uniformity at long working distances. Consisting of the OmniCure AC450, AC450P, AC475, AC475P, our AC4 Series utilizes our patented... Read more »
OmniCure AC5 LED Small-Area UV Curing System
OmniCure® AC5 Series of air-cooled LED UV systems are designed for small area curing. With advanced front-end optics, these high power UV curing systems deliver 14W/cm2 peak irradiance for fast, even curing. The Series includes the AC550, AC550P, AC575 and AC575P, with the P versions having... Read more »
OmniCure AC7 LED Large-Area UV Curing System
OmniCure® AC7 Series of air-cooled LED UV curing systems are suitable for large-area curing. Designed with high-output LEDs and custom optics, the AC7150 and AC7300 systems deliver over 5 W/cm2 peak irradiance and exceptional uniformity over the entire curing area. The AC7 Series provides high... Read more »
OmniCure AC8 LED Large-Area UV Curing
OmniCure® AC8 Series of air-cooled LED UV curing systems are designed to deliver over 8 W/cm2 peak irradiance with exceptional uniformity for even curing. The AC8150/P, AC8225/P and AC8300/P UV curing systems provide high longitudinal uniformity over the entire 150 mm (6") to 300 mm (12") curing... Read more »
OmniCure AC8225-F+ and AC9225-F LED Fiber UV Curing System
OmniCure® AC8225-F+ and AC9225-F LED UV curing systems are designed for fiber curing applications. Featuring a custom optical design to enhance output and optimize delivery of UV onto the fiber, the OmniCure AC8225-F+/AC9225-F provide an air-cooled, high output solution to meet the market demand... Read more »
OmniCure AC8-HD LED High-Dose, Large-Area UV Curing Systems
OmniCure® AC8150P-HD, AC8225P-HD and AC8300P-HD air-cooled, LED UV Curing Systems deliver an outstandingly high optical dose, bringing UV LED curing to the next level. The AC8-HD Series of products are designed with a patented technology that enables unbeatable uniformity of output across the... Read more »
OmniCure AC9 LED Large-Area UV Curing System
OmniCure® AC9 Series are high-power LED UV Curing Systems delivering over 14 W/cm2 peak irradiance for fast curing of inks, adhesives and coatings. Consisting of the AC9150, AC9150P, AC9225, AC9225P, AC9300 and AC9300P, the AC9 Series are high-performing, air-cooled solutions with a small... Read more »
OmniCure CV300 Low-Volume Production Conveyor
The OmniCure® CV300 is a versatile conveyor system designed to complement the OmniCure AC Series of high power LED UV curing systems and is suitable for production, laboratory and research and development applications. The CV300 can handle substrates up to 310 mm (12.2”) wide on its open mesh... Read more »
OmniCure Lamp UV Curing Systems
The OmniCure® S Series of Lamp Spot UV Curing Systems are used for precision adhesive curing of medical devices, electronics and optoelectronics. Due to the accuracy requirements and critical nature of these devices, a repeatable process with reliable UV curing equipment is essential for achieving... Read more »
OmniCure LED UV Curing Systems
OmniCure LED UV Curing solutions offer both spot and area-curing UV curing systems for adhesives, coatings and inks. Consisting of the LX Series and AC Series, OmniCure high-power UV LED systems provide a selection of wavelengths, configurations and accessories to address a wide range of... Read more »
OmniCure PLC2000 Programmable Controller
OmniCure® PLC2000 programmable controller is designed to complement the OmniCure AC Series LED UV curing systems. When connected to an AC Series LED UV head, this multipurpose, external controller device allows you to intelligently manage, monitor and control an LED system. With unparalleled... Read more »
OmniCure SC Series LED UV Power Supply Controller
OmniCure® SC Series power supply controllers are tailored specifically for the OmniCure AC Series LED UV curing systems. Designed with application flexibility in mind, the SC Series offers a selection of system controllers to best meet the needs of a particular curing application. With a small form... Read more »
Omnify Empower PLM
Omnify Software provides business-ready Product Lifecycle Management (PLM) solutions that help medical device and equipment manufacturers deliver innovative, safe and compliant products while eliminating costly redesign and shortening development cycles. The Omnify Empower PLM solution provides... Read more »
Onboard power Converters
Martek Power is a worldwide market leader in designing and manufacturing onboard power converters. Our onboard power converters from single or multiple outputs, AC or DC inputs, and Output Power from 1 to 280 watts. Our single and multiple outputs AC and DC input onboard power converters are... Read more »
One Way Bearings
Bearings or Anti-Reverse Bearings. This design uses the same small radial section as drawn cup needle roller bearings which make better use of available space. The units are compact, lightweight and operate directly on a shaft; they are also suitable for transmitting high torque. One Way Bearings... Read more »
ONEAC ConditionOne® Series Power Conditioner (75-1000 VA)
The ONEAC ConditionOne® Series provides a high performance solution without battery backup. It has a built-in isolation transformer to eliminate electrical noise, ensuring attached equipment is unaffected by the electrical environment and does not degrade over time. Optional ONEGROUND® technology... Read more »
ONEAC ON Series m Medical-Grade Power Conditioned UPS (300-600 VA)
ONEAC solutions are designed to protect the mission-critical applications found within a healthcare environment including, diagnostic imaging systems, clinical lab equipment, and healthcare IT systems. The ONEAC ON Series m Medical-Grade Power Conditioned UPS complies with IEC60601-1 standards and... Read more »
ONEAC ONePlus™ Series UPS (250-1000 VA)
An optimal power solution for business, the ONEAC ONePlus™ Series UPS features cost effective, line interactive operation with a noise reducing isolation transformer. The ONePlus series with ONEGROUND® technology to protect against ground skew problems, is the UPS of choice for supporting mission... Read more »
ONEAC PCm Medical-Grade Power Conditioner (120-3000 VA)
In medical applications, the need to protect critical electronic equipment and crucial data is second only to protecting patients. ONEAC medical-grade power conditioners provide clean power to the equipment in these demanding applications. Our Medical Grade PCm series, meets UL60601-1/ IEC60601-1... Read more »
ONEAC Sinergy SE II Series Power Conditioned UPS (4 - 20 kVA)
Incorporating online double conversion technology, each Sinergy® SE II Series UPS comes standard with power conditioning, built-in maintenance bypass, front access easy replaceable internal batteries and matching external battery cabinets for extended runtimes up to 8 hours or more. Also available... Read more »
Online LSS & SPC Training
Quality America has offered SPC and Quality Improvement training and instructor materials for over 30 years. Our SPC courses and Lean Six Sigma certifications, facilitated by author Paul Keller, are based on his best-selling texts, co-published with the McGraw-Hill Professional Education team.... Read more »
On-Tap
On-Tap software lets you add barcoding to all of your UNIX or VMS applications. Print all popular barcodes, including 2D barcodes. Control the placement and all bar code specs, including density, human readable characters, orientation and more. And, no specialty printers are required! Read more »
OPERATOR INTERFACE TERMINAL MOUNTS
Strongarm’s operator interface terminal mountings are designed and built to your exact specifications. The counterbalanced vertical motion of the Vertica Arm allows the operator to lift effortlessly, lower, and reposition the enclosure using the release handle. When the handle is released, the arm... Read more »
Ophtalmology Eye Surgery Bed
The Ophthalmology Eye Surgery Bed is a precision-engineered patient positioning system specifically developed for ophthalmic laser procedures such as LASIK, PRK, and SMILE. With ultra-smooth, vibration-free motion control and joystick-controlled fine adjustment (0.02 mm (20 microns)... Read more »
Optical Design
We have extensive experience in physical optics, geometrical optics, photonics, optical physics, opto-mechanics and opto-electronics. We design complex optical systems and precision optics for different applications. Our expertise includes: UV systems Visible systems NIR, SWIR and LWIR... Read more »
Optical Engineering Services
Optical Engineering Services Our optical engineering services team is available to take on custom projects as well as help you to troubleshoot and improve existing setups. As a front runner in the optical design space, we have extensive experience with both problem solving and design development,... Read more »
Optical Pinhole
Material: Stainless Steel, aluminum,glass and copper etc. Thickness (mm): standard 0.05mm, 0.1mm. Can be customized Outer Shape Diameter (mm): 9.5mm or customized Pinhole diameter: 5um,10um,25um,50um,75um,100um,200um,500um,1000um or at customer’ request Type: Unmounted,... Read more »
Optical Slits on Glass
Optical Slits are widely used for entrance and exit slits in optical instruments and systems, including spectrophotometers, line spread functions, masking and in a wide range of imaging and alignment applications. We also manufacture various metal slits and pinholes, including mounted and... Read more »
Optics for laryngoscopes
ASE Optics offers expertise and knowledge in optical design and systems integration for different imaging medical technologies and devices. One of the examples is the re-design and improvement of the optical systems integrated into video laryngoscopes. Our customer sought to improve the image... Read more »
OptiGauge® II
The OptiGauge® II is an ideal non-contact, non-destructive thickness measurement system for companies looking to move away from traditional contact measurement systems. It is non-destructive and objective, leaving no margin for operator error. It offers customers extraordinary flexibility in a... Read more »
OptiGauge® LT
The OptiGauge® LT offers outstanding performance and value for lab and R&D applications. Measurement range of 12 µm to 5 mm with ± 2 µm accuracy making the OptiGauge LT a great entry level alternative. This user-friendly, non-destructive system delivers reliability and micron accuracy so vital to... Read more »
Optimum™ Components
Nordson EFD’s Optimum syringe barrel and cartridge systems set the new world standard for quality, consistency and reliability. Each patent pending component has been designed as part of a complete, integrated system that improves yields and reduces costs by producing the most accurate,... Read more »
Optomechanics and Optoelectronics
ASE goes beyond optics: we offer integrated solutions for OEM customer products. From concept to production, we achieve the stringent specifications required by high-end applications and unique requisites, end-to-end. Optical assemblies and prototyping. We offer an accurate service in optical... Read more »
Orbis Micro-XRF Elemental Analyzer
Now you can get advanced non-destructive elemental analysis with the flexibility to work across a wide range of sample types and shapes. There is minimal sample preparation. No coating is required. Orbis Micro-XRF Analyzers incorporate fast, simultaneous multi-element X-ray detection with the... Read more »
Order Control
Pro QC’s production order control services contribute to improved timeliness and consistency. Read more »
O-Ring
Trelleborg Sealing Solutions offers a wide range of O-Rings that balance cost-effectiveness with performance. Any size of O-Ring is available (metric or inch, standard or custom), including giant O-Rings using our Fleximold™ process. In addition, a wide choice of materials for both standard and... Read more »
O-Ring Assembly
Automated seal /o-ring assembly from small to large O ring placement applications. Spread and place seals with these dual motion automatic o-ring placement assembly machines. Two sizes available, one for handling up to 3 inch I.D. AGP-6-OR (six jaw) and a larger unit to handle up to 12 inch I.D.... Read more »
Orthodontic Packaging System
The Challenge A company manufacturing orthodontic components required a special system to prepare "assembly cards" to be used with their products. The card required discreet, variable amounts of a special UV curable adhesive to be applied at multiple sites on each card. Following the adhesive... Read more »
Orthopaedics, Brace and Medical Softgoods Production Services
Our medical cutting and sewing production is 1SO13485 qualified and experienced in a broad range of textile based sewing medical products. From simple one-time use Items to post-operative bracing systems and “Physician Order Only for Use" restraints with demanding performance Characteristics. Our... Read more »
