Cemented tungsten carbide trapezoid knife 752V with 3 cutting edges
Sollex 752V special blade is a double sided trapezoid blade with 3 very sharp cutting edges. 752V trapezoidal machine knife is made of solid tungsten carbide of the premium quality. The measurements of the trapezoidal blade are 52x30x19x0.65mm; the knife blade 752V has a long cutting side of 52mm... Read more »
Center of Gravity Load Cell System
Load Cell Central, a designer and manufacturer of custom weighing systems, load cells, and other cutting-edge electronic weighing and force measurement equipment, now has available a high performance, cost-effective means of automatically finding and monitoring the center of gravity for any load... Read more »
Ceramic (Ferrite) Magnets
Integrated Magnetics carries a large inventory of permanent ceramic & flexible magnetic materials in both standard & premium grades. We design and build custom ceramic and flexible magnets, manufactured to meet your specialty requirements. Request for quote or contact us today for more information... Read more »
Ceramic Core Alumina Heater
High compression strength, hardness and wear resistance, Alumina heaters facilitate high heat resistance and high thermal conductivity applications. Ideal solution for small to mid-size heaters where uniform surface temperature is required, Alumina provides the highest insulation standoff per unit... Read more »
Ceramic Hybrid & Steel Bearings
The purpose of a radial bearing is to reduce rotational friction and support loads. This is achieved by using two races to hold the balls and to spread the load through the balls. As the bearing race rotates it causes the balls to rotate. The ball provides for substantially less rolling resistance... Read more »
Ceramic Packages for RF Transistors
Materion (formerly Zentrix) is a leading manufacturer of ceramic packages for RF power transistors and MMICs. We offer BeO packages for VMOS and bipolar transistors. Our brazed ceramic air cavities are suitable for high power Si and GaN transistors. We are the exclusive vendor of our CuPack... Read more »
Certification
North America Certification North America offers significant opportunities to launch and sell your products. The right product certification mark is key to opening doors to markets in Canada and the United States. CSA Group is a recognized third-party certification body and testing agency with... Read more »
Certification / Third Party Assessment
LNE is committed to providing manufacturers with the technical solutions they need to ensure quality, speed innovation and offer products throughout the world. Our 770-person staff includes engineers, technicians, researchers and other experts in a variety of major sectors. Our LNE/G-MED... Read more »
Certified Translation Services
EXCELLENCE FOR EVERY INDUSTRY Since 1996, Excel Translations has been serving the globalization needs of businesses and organizations worldwide, including many Fortune 1000 companies. From our operation centers in North America, Europe, and South America, we provide a wide range of professional... Read more »
Cetec ERP
Cetec ERP is a highly practical web-based ERP platform built for small and mid-market manufacturing companies. It is designed to help SMB manufacturers efficiently manage all aspects of their manufacturing company and solve their most difficult challenges unique to a manufacturing environment. It... Read more »
Cetus Textile Labels
Cetus is a proprietary line of permanent-care, coated textile fabrics for use in clothing care and industrial labeling applications. Cetus represents the state of the art in printable textile fabrics and has been proven to far surpass conventional printing materials in durability, versatility and... Read more »
CGI Precision Gearheads
CGI Precision gearheads are available in NEMA sizes 17 to 75. Metric equivalents are also available. Standard ratios ranging from 3:1 to 700:1, in planetary and spur designs, with custom shafts and multiple mounting options, are offered in right-angle, in-line, and offset configurations. The... Read more »
CGMP Modular Cleanroom
A medical device company needed a new CGMP ISO-7 cleanroom ASAP start manufacturing in a very short time period. American Cleanroom Systems was able to rapidly design, manufacture and install the cleanroom to meet the customer’s aggressive schedule. On-site assembly was completed in just 6 weeks (2... Read more »
chainflex® continuous-flex cables
chainflex® continuous-flex cables deliver optimal performance in demanding, flexing applications on all types of automated machinery. They have been tested over millions of cycles in all types of conditions in the igus® test laboratories. The chainflex® range was developed by igus® in the 1980s... Read more »
Chambers
Qosina offers medical in-line drip chamber assemblies, in stock and ready for immediate delivery. Several drip chambers are equipped with a cover that allows 20 drops/ml, and some are offered with a 15 micron filter. Qosina stocks a non-vented solution filter drip chamber, and a non-vented drip... Read more »
Change Management
Record change requests and securely track approvals, progress and trends. Read more »
Check Valves
Molded with "Premium Grade" technology. Barbs molded without parting Line. Free floating diaphragms. Application Range: 1 to 150 PSI. Standard, Reducing, & Enlarging. Threaded/Barbed Combination. Duckbill style for low pressure. Read more »
Check Valves
Check valves for use in biomedical, medical, and industrial applications. Stainless and brass check valves, plastic check valves made from PVC PVDF , polypropylene, and nylon. Plastic check valves include diaphragm valves, duckbills valves,and spring loaded valves. PVC and PVDF check valves for... Read more »
Check Valves
Check Valves A check valve allows fluid flow in one direction and stops, or checks, fluid flow in the opposite direction. Flow handling performance is determined by the type of check valve selected. - Bi-Directional Valves - Duckbill Check Valves - Poppets and Needles - Umbrella Check Valves... Read more »
Checker Sensors
The Checker® vision sensor is an award winning all-in-one vision sensor with built in camera, processor, lighting, optics and I/O capable of detecting and inspecting up to 6,000 parts per minute–all in an industrial IP67 enclosure small enough to fit into the tightest of spaces. Checker vision... Read more »
Chemical Analysis
Experience is of key importance when it comes to Analytical Chemistry. Our Chemists combine their years of experience with modern techniques and equipment to provide accurate, reliable results. They have experience and knowledge involving many types of materials including metals, plastics,... Read more »
Chemical Analysis
Laboratory Testing Inc. performs both Instrumental Chemical Analysis and classical Wet Chemistry methods to provide customers with information about material composition, including trace elements and impurities. Many test results can be provided qualitatively and quantitatively. Our chemists... Read more »
Chemical Analysis
The IMR chemical analysis lab has numerous analytical tools at its disposal, all geared toward providing accurate, NIST traceable analyses of metals and process solutions. IMR’s alloy chemistry lab is among the best in the world, employing an experienced, professional, and knowledgeable staff which... Read more »
Chemical Process Indicators (CPIs)
NAMSA's Chemical Process Indicators are designed to transition color upon exposure to a sterilization process. The indicator label color indicates at a glance whether or not the product has gone through the sterilization process. NAMSA CPIs are ANSI/AAMI/ISO Class 1 compliant and are suitable... Read more »
Chemistry Lab Services
The NSL Analytical chemical testing laboratory provides a broad range of chemical analysis services including elemental analysis and classical wet chemistry. Our testing labs provide analytical testing throughout a variety of sample substrates to levels ranging from: • Trace analysis (10 ppb to 1... Read more »
Chemistry Testing
Geneva Laboratories’ chemistry department provides quality compendial and non-compendial chemical analysis of raw materials and final product. Compendial testing of pharmaceuticals (APIs and drug products), food additives, and reagent chemicals is performed under one of the following compendia: •... Read more »
Choice®Edge
Designed for cleanroom and controlled environments, the Choice® Edge is a continuous knit polyester wiper with four-side border sealed edges. When tested for fiber release using IEST test standards, Choice® Edge released fewer fibers than the average sealed edge wiper. With a consistent border... Read more »
ChromaBiocolor
color masterbatch using a PHA (polyhydroxyalkanoates) biobased polyester that would comply to *ASTM D-6400/*DIN EN13432 Bio-Composting standards. The Chroma Color Technology team developed three new colors for our customer using a specifically designed carrier resin for a masterbatch: Read more »
ChromaNIR
ChromaNIR’s Sortable Black Technology is based upon IR reflecting/transparent components using a proprietary combination of specialty dyes and organic pigments. The Chroma Color path to success allows for expanded exploration of additional Black options, including near-Black and other Dark Color... Read more »
CHROMAPCRPET™
About ChromaPCRPET™ Key Features of ChromaPCRPET™ include: -Ability to use in sheets, bottles and other applications -Product is commercialized -Product is FDA compliant with No Objection Letter (NOL) -Chroma Color offers correction colors for PCR, chain extenders, processing stabilizers and other... Read more »
CHROMAQUASAR™
About CHROMAQUASAR™ ChromaQuasar™ meets needs of the low-voltage, automotive, and appliance wire markets for moisture cure XLPE compounds.Chroma Color works closely with a moisture-cure compound manufacturer to craft maximum color pigment into concentrate packages compatible with the base compound.... Read more »
CHRONOS
Modeling and simulation of many RF applications and antennas present a challenge in terms of speed, required memory, and accuracy. INTEGRATED Engineering Software introduces CHRONOS, INTEGRATED’s new time domain solver for modeling and simulating 3D RF and microwave applications. The move from... Read more »
Cinche Handle
Details: Complete redesign, reverse engineered product, and advised necessary enhancements for molding, part design and material selection. Provided design capable of withstanding higher forces which were reflective of true forces during real life operation. Removed defects in molding, thereby... Read more »
Cincom Models
We proudly offer our Cincom series of Swiss-type sliding headstock CNC automatic lathes, designed to meet the diverse machining needs of modern industries with unmatched precision and efficiency. Our range includes innovative models such as the Cincom L12 Series, featuring advanced Y2 axis... Read more »
Circuit Board Shields
Leader Tech's Circuit Board Shielding provides board level protection from EMI. Available in a broad range of sizes, the snap-in dimple design provides a positive contact and downward stop while allowing removal of the cover for accessibility. Read more »
Circuit Breakers
As the premier supplier of power system components, Interpower has what you need to complete your projects, including circuit breakers. Interpower has no minimum order requirements, plus same day shipping is available on in-stock Interpower products. Electronic equipment is often designed with... Read more »
Circuit Breakers - AIRPAX, CARLING, EATON-HEINEMANN,CBI, SCHURTER, ETA, GLOSO
Circuit breakers are a current sensing electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow. Unlike a fuse, which operates once and then must be replaced, a circuit... Read more »
Circular
• Corrosion resistant / lightweight composite construction • EMI/RFI shielded versions • Thermocouple contacts • Environmentally sealed versions • Rear insertion/ front release of removable contacts • Two level sequential mating • Overmolded assemblies Contact Sizes: 12, 16, 20 and 22 Current... Read more »
Circular Connectors
M12 M8 7/8 connectors, cable assemblies, junction boxes Read more »
Circulation Heaters
Watlow's circulation heaters are compact heating systems for fluids and gases. These heaters are ideal for applications such as purified and inert gases, supercritical fluids and liquids like de-ionized water for use in semiconductor and electronics industries as well as for general liquid and gas... Read more »
Clamp Bushings
• Hardened Stainless Steel • Patent Pending Design • Designed for use with std. two set screw collar (90 deg. offset) • Will not mark shaft • Available in Metric or English • 25% greater holding power than std. split collar The C-Flex patent pending progressive clamp bushing, utilizes force... Read more »
Clamshells Packaging
Clamshell packaging is available from VisiPak in nearly 200 stocked styles and sizes. Cavity dimensions are listed so you can measure your product to determine which size best fits and samples are free for testing. Retail packages can be completed with insert cards containing typical product... Read more »
CLD Continuous Level Detector
The INTROTEK® Continuous Level Detector (CLD) is available in a standard configuration (pictured at left), as well as customized designs to meet customer application requirements. The unique pulsed, non-invasive design enables the liquid level from the bottom of a vial container or tank to be... Read more »
Clean Bench Testing and Maintenance
TSS offers comprehensive testing, certification, and maintenance of unidirectional flow devices (also known as laminar flow units or clean benches). Our skilled technicians are authorized to perform warranty repairs for all major equipment manufacturers. All testing is performed in accordance with... Read more »
Clean Room
For ultra-clean, contaminant-free medical parts that meet industry regulations, we have a Class 7, ISO-compliant, FDA-approved clean room. Together with our experienced staff, our clean room enables us to safely manufacture injection-molded products for medical OEMs that meet the stringent needs of... Read more »
Clean Room Assembly
Our Class 10,000 (ISO Class 7) Clean Room is available for manufacturing and assembly of medical devices requiring sterilization. Our operators all follow a high level clean room protocol for gowning and entrance to the room Read more »
Clean Room Assembly and Packaging Services
To provide our customers a single source solution, we offer ISO 7 or Class 10K clean room assembly and packaging services to complete your project. Assembly operations can be simple or complex, since we have the ability to build custom fixtures to aid in the assembly process. Examples of assembly... Read more »
Clean Room Die Cutting
JBC Technologies has two ISO 8/ Class 100000 clean rooms (ISO 7/Class 10000 available) for producing high-purity products in a controlled environment. Our clean room has been carefully designed to meet the strict standards and quality requirements of the highly specialized industries requiring... Read more »
Clean Room Molding
Precision Associates’ clean room manufacturing area is, in effect, a miniature replication of our regular manufacturing facility. Nearly all of the equipment used in our regular manufacturing processes is also included in our 6,000 sq. ft. ISO14644-1, class 7 (10,000) clean room. The compounds we... Read more »
Clean Room Operations
Our clean room areas consist of Class 7 (10,000) & Class 8 (100,000) certified environments, allowing the flexibility to provide customers with true turnkey operations at any pre-qualified press. Our strict Quality Management System registered to ISO 13485 & ISO 9001 contains standard operating... Read more »
