Monitoring Management Software
Chloride offers a range of tools to shut down a single server, an entire network, or monitor your UPS status remotely via SNMP, Telnet or the web. Read more »
Monochrome USB Camera
See3CAM_CU135M is a 13MP monochrome fixed focus USB 3.1 Gen 1 camera that offers excellent picture quality in both visible and near-IR regions. This monochrome 4K camera is based on the 1/3.2 inch AR1335 CMOS image sensor with advanced 1.1μm pixel BSI technology from onsemi™. Also, this camera... Read more »
Monochrome USB NIR Camera
See3CAM_CU55M is the latest 5MP Monochrome camera in e-con Systems' family of USB 3.1 Gen 1 UVC cameras. Based on the AR0521, it delivers stunning low-noise image quality. Backed by 2.2μm x 2.2μm pixel BSI technology, it produces monochrome images of exceptional quality that offer the best tonal... Read more »
Mono-Coil Tubing
Our Medical Mono-Coil Tubes or hoses have been specifically designed to fulfill the high tech requirements for minimal invasive surgery, endoscopy, and optical fiber protection for medical lasers. Read more »
Monodek® Sutures
Monodek® is a strong and easy-to-handle suture that possesses outstanding resorption characteristics essential for delicate needs. Characteristics include smooth, secure suture with a low risk of wicking. Monodek® suture retains its initial wound healing tensile strength with 70% at two weeks, 50%... Read more »
Monofilament
Monofilament fiber is used in braiding applications for general industry where weaved products are produced to provide non-stick, high temperature surfaces. Read more »
Monolithic Crystal Filters
MCF (MONOLITHIC CRYSTAL FILTER) features high quality quartz resonators with sharp cutoff characteristics, low loss, good inter-modulation and high stability over a wide temperature range. Read more »
Mops
Freudenberg Household Products is a world-wide leading manufacturer of innovative cleaning and disinfecting tools for the Pharmaceutical, Bio-Pharm, Medical Device, Electronics, Industrial, Medical, Food Service, and Lab Animal Research marketplaces. FHP LP has recently developed a new “Advanced... Read more »
Motion Control
Optimal Engineering Systems, Inc. is a manufacturer of motion control products. The company's product line includes motion control systems, drive electronics, modules and controller cards. OES also supplies stepper and servo motors, voice coil motors, and positioning stages and slides. All products... Read more »
Motion-Control-Sensors
Motion control sensors are indispensable components that form the basis for many modern technologies. They are used in numerous industrial sectors. One of their greatest advantages is their precision. Motion control sensors enable precise control, which is essential in many application areas. They... Read more »
Motor Control Modules
Control Modules for use in your medical handpiece repairs. System 2000 Modules, System 4,5, & 6 and more. Read more »
Motorized Linear Stages
The Motorized Linear Stage is used in positioning applications where high speed, high acceleration and high accuracy are required. The stage may be used in the following industries; Semiconductor, Disk Drive, Automotive, Medical, Industrial, Optical, Test and Manufacturing. The non-commuted... Read more »
Motors
Motors for use in Stryker handpieces. Read more »
Motors / Amplifiers / Drives
At Industrial Indexing Systems we offer a wide range of brushless servo, and stepper motors with output power from 30W to 55 kW. Wash down, high temperature, explosion proof, and food grade models are all available. Amplifier choices include servo and stepper driven models, and we can engineer a... Read more »
Mounted Slit
Mounted slits and pinhole specification: Slit Widths Available: 5 – 1000 µm Slit Length: 3 mm or customized Slit Material: 304 Stainless Steel, or 304 Stainless Steel with Black Oxide Finish Housing: Black-Anodized Aluminum with Ø1″ (25.4mm) Outer Diameter x 0.10″ (2.5mm)Thick Unmounted Slit... Read more »
Mousetail Plugs
Our Silicone Mousetail (SMT) line is the ideal solution when masking small openings, threaded holes, and small irregularly contoured features. Their thin profiles make them extremely stretchy, allowing them to contract and fit into different size holes. Our high temperature Silicone is specially... Read more »
MPK50 Robot
Motoman Robotics' flexible, high-speed MPK50 robot offers superior performance and reliability in a wide variety of packing applications. The MPK50 robot features a 50 kg (110.3 lb) payload and a wide 360-degree work envelope, combined with best-in-class motion, speed and wrist ratings. A slim... Read more »
MPS Multi Probe Alarm System
MPS Series Systems are multi-probe (2-8 probes), lab-grade monitors and alarm systems that have the ability to automatically inform you of out-of-tolerance conditions within freezers, refrigerators, coolers, and, within server rooms and buildings. They can be configured with various sensor types... Read more »
MSV Series
MSV Series Our Spring-loaded Poppet Check Valves can be used for various applications including: Air, Inert Gases, and Liquids. 3/16 SS Spring. Water Column Options: 3 inch .10 psi 6 inch .20 psi Material Options: (PC) Polycarbonate (AC) Acetal (PVDF) PVDF Size Options: (any combination of the... Read more »
Multi-Axis Positioning System
The Multi-Axis Positioning System is designed to allow direct coupling between the load and the drive motors. This feature eliminates backlash, allows for fast acceleration / deceleration, high speed operation while increasing the reliability. These systems are available with linear stepper and... Read more »
Multichip Emitters and Chip on Board Packaging
As electronic products evolve technologically and the push for miniaturization continues, space constraints for electronics continue to be a concern for design engineers. Marktech Optoelectronics specializes in chip on board (COB) solution where multiple LED chips can be placed into a small amount... Read more »
Multi-Component Molding
Multi-component molding allows for the production of complex parts not possible in single shot molding, such as the production of multi-colored and multi-resin parts and assemblies, as well as movable segments or components. Using one mold, one press, and no skilled technicians, the press injects... Read more »
MultiDyne™ Corona Treating System
The MultiDyne Corona Treating is the perfect solution to adhesion problems on injection, blow molded or extruded parts. A MultiDyne Corona Treating System can be incorporated into existing or new production lines, or operated manually. Treatment is done prior to printing, gluing or laminating. The... Read more »
Multi-layer Tubing
Sunlite's advanced extrusion technology allows us to offer tubing in multiple layers. The layers can be different materials, durometers, or colors. Read more »
Multilumen Medical Tubing
We manufacture multilumen medical tubing. Read more »
Multi-lumen Tubing
Sunlite is the leader in the design and manufacturing of multi-lumen tubing. The number of lumens and lumen dimensions can be customized to meet your specific requirements. Multi-lumen tubing can be tapered, colored, or striped. Read more »
Multi-Lumen Tubing; FEP, PEEK, PTFE, PFA, and ePTFE
Applied Medical Tubing welcomes the opportunity to serve your organization. Our USP Class VI certified polymers makes for easy integration into regulatory requirements. All Multi-Lumen tubing are custom designed to your confidential specifications and are designed with different resins,... Read more »
Multimode Single Emitters
LDX Optronics was incorporated in 1990 and is focused on broad stripe multimode laser diodes largely in the esoteric wavelengths with an emphasis on the red laser diodes modules and Infrared wavelengths. LDX offers the widest wavelength range in the industry, with wavelengths available from 622nm -... Read more »
MultiPole LED UV Spot System
The Electro-Lite MultiPole curing system is the only unit on the marketplace that offers 2.5 W/cm2 of UV intensity @ 365nm to 385nm allowing for a wide spectral band of fast and efficient curing of UV adhesives across the board. The system enables the curing of UV adhesives from up to 4 individual... Read more »
Multi-Tubing
Sunlite is a leader in the design and manufacturing of multi-tubing whereby multiple tubes are extruded together to create various configurations. Read more »
Mutilumen Tubings
• SINGLE LUMEN • MULTI-LUMEN • BUMP MULTI-LUMEN • TAPER TUBING • CO-EXTRUSIONS • TRI-LAYER EXTRUSIONS • BRAIDING • BULLET NOSING • DISTAL TIPPING/SHAPING • COATING OVER BEADING • SOLID ROD EXTRUSIONS • SUB ASSEMBLIES Read more »
