Medical Device Directory

Products in the Medical Device Directory

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • Sachet & Pouch Handling By RNA Automation Limited

    RNA Automation provide a solution for handling pouch and sachets not normally feasible with vibratory feeding equipment. The RNA pouch and sachet handling systems are the market leader in the automation industry by its innovative and highly original designs. The RNA pouch and sachet handling... Read More
  • Safety Products Technology By Kahle Automation

    Kahle is a worldwide supplier of automation and process equipment for the Medical Device & Pharmaceutical Industries. Dedicated to designing solutions for only one Industry allows us the opportunity to develop the expertise required to build production systems with an understanding of the... Read More
  • Safety Testing By F2 Labs

    F2 Labs is a full-service safety testing organization. Our safety laboratories are set-up to test/evaluate products for the United States, Canada, Europe, and International Certifications. Our safety facilities are A2LA Accredited, and our safety test data and evaluations are accepted by an OSHA... Read More
  • Sanitary Gaskets By Trelleborg Sealing Solutions

    The primary function of sanitary gaskets is to seal pipe unions and joints in a sanitary fashion so that there is no dead space. These gaskets withstand extreme temperature, steam and aggressive chemicals associated with Steam-in-Place (SIP) and Clean-in-Place (CIP) regimes. Read More
  • Sauven 1000 Series By Griffin-Rutgers Co

    High resolution ink jet coder. One controller sends print instruction to up to four separately positioned print head, printing the same or different information. Read More
  • Sauven 500 By Griffin-Rutgers Co

    Low Cost, compact high resolution ink jet printer, prints 18mm high and uses a Windows interface Read More
  • Sauven 6000 Plus Ink Jet Coder By Griffin-Rutgers Co

    High resolution ink jet coder for printing on cartons, cases and trays - virtually all absorbent material Read More
  • Sauven 6000R Plus By Griffin-Rutgers Co

    High Resolution Ink Jet Coder for bottles, jars and products. Prints from the side, at an angle or from above, using a "remote" print head (on an umbilical) with an automatically closing shutter. Read More
  • Sauven 7000 By Griffin-Rutgers Co

    High resolution, large character case coder for carton, printing up to 70mm text and barcodes. Read More
  • SC 5004 & SC5008 By MicroMo Electronics , Inc.

    Speed Controller SC 5004 & 5008 for Brushed and Brushless DC Motors MICROMO and the FAULHABER Group is adding two new Speed Controllers to its controller range. The PI Controller series is software-configurable – so no need for trimmers or DIP switches – and can be operated with one and the... Read More
  • Scientific Injection Molding (Custom) By Plastikos , Inc.

    Plastikos partners with our customers to turn around their orders with precision and speed. Our manufacturing system is designed to routinely fulfill orders in one to three days so that we can support our customers’ lean inventory initiatives. We accomplish this service through the use of 27... Read More
  • SCN5 Series Electromechanical Cylinder By Servo2Go.com Ltd.

    The SCN5 series of Dyadic's Mechatronics Cylinder line is ideal in that the motor, encoder, drive and actuator are one integral package. Dyadic has developed the linear actuator drive mechanism such that the screw and nut are optimized for high accuracy, long life and low cost while delivering... Read More
  • Scoop Feeding & Inserting By Palace Packaging Machines Inc.

    Feed and insert typical product scoops from bulk and into cans, bags, and cartons automatically. Read More
  • Scorpion Rapide Fiber Laser By Electrox Laser Marking Systems

    A powerful and versatile, Yb:Fiber Laser Marking System with power ratings ranging from 20watts to 70watts. Read More
  • Screw Driven Slides By LINTECH

    Lintech offers a large selection of ball screw driven linear positioning actuators, slides, stages and tables. The 130 series is our smallest linear slide at only 2.875 inches wide with a height of 2.375 inches but is available in travel lengths out to 60 inches. This linear stage, just like all... Read More
  • Screw Machine Tooling By Slater Tools Inc.

    Our Focus at Slater Tools is to design, manufacture and deliver the finest, most competitive screw machine tools. We do this by combining qualified, dedicated people with state of the art technology. Our service and quality is the best. Our courteous sales staff is trained to answer your... Read More
  • SCS microRESIST™ Antimicrobial Parylene Technology By Specialty Coating Systems, Inc.

    New SCS microRESIST™ Antimicrobial Parylene Technology is now available from SCS! microRESIST™ combines the benefits of biocompatible Parylene coatings with effective antimicrobial properties to effectively eliminate harmful microorganisms on coated medical devices Read More
  • SCS PARYLENE COATING SERVICES By Specialty Coating Systems, Inc.

    SCS Parylene coatings provide medical devices and components excellent moisture, chemical and dielectric barrier protection. Parylene also has a low coefficient of friction for applications where lubricity is important. Read More
  • SDA10D Robot By Yaskawa America, Inc. - Motoman Robotics Division

    Motoman Robotics' SDA10D (slim, dual-arm) robot can perform a myriad of assembly, handling, machine tending packaging and part transfer applications. It features 15 axes of motion (7-axes per arm, plus a single axis for base rotation). Both arms can work on one task to double the payload or... Read More
  • Seal Integrity Testing and Seal Quality Analysis By PTI Inspection Systems

    Seal-Scan® inspection systems characterize seals that appear visually acceptable yet possess defects that affect product quality and shelf-life. The Seal-Scan® 525 is an offline inspection system used for the detection of seal defects, seal characterization and material analysis. Seal-Scan® 525... Read More
  • Seals & Gaskets By FABRI-TECH COMPONENTS, Inc.

    Fabri-Tech is one of the industry’s leading seals and gaskets suppliers, offering a diverse array of solutions for electronic devices. We can create seals to prevent contaminant infiltration, EMI gaskets to block electromagnetic interference, gap fillers for thermal transfer—any of a broad range... Read More
  • Seal-Sensor Inspection System By PTI Inspection Systems

    Seal-Sensor™ inspection systems check and verify the quality of pouch seals Seal-Sensor™ utilizes ultrasound technology that provides non-contact seal inspection solutions for high speed 100% online applications. Seal-Sensor is a very rapid, reliable method that provides an instant reading... Read More
  • Secura® Accurate Weighing System By Sartorius Corporation

    Secura® makes reliable weighing in regulated areas easier than ever, without time-consuming documentation and monitoring tasks. Besides providing highly accurate weighing results and operating convenience, Secura® also features built-in protection systems for complete reliability and regulatory... Read More
  • SecureCap®, child resistant closures By Comar

    Available in 13, 15, and 18 mm sizes. Closures meet Consumer Product Safety Commission (CPSC) protocol requiring child-resistant closures for over-the-counter or prescription products containing 0.08 milligrams or more of an imidazoline in a single package. The 15 mm size can be combined with... Read More
  • SegeNT Embedded GUI Controller By Haidar Technology

    Haidar Technology Embedded GUI Solutions enable manufacturers and product designers to easily achieve smart and graphic-rich user interface on a new or existing microcontroller based products. The core technology which includes Haidar's Serial-Enabled Graphic Engine (SEGE) runs the entire GUI... Read More
  • Selective Laser Sintering (SLS) Prototypes By Harbec, Inc.

    Laser-sintering is well known as the technology of choice for ensuring the quickest route from product idea to market launch. Selective Laser Sintering (SLS) is an additive process where layers of powder are deposited, solidified and sintered with a computer-driven laser to form a 3D model.... Read More
  • Self Service Center By PhaseWare Inc.

    With Self Service Center: Offer 24/7/365 customer support through a service channel preferred by many customers. Reduce service handling times and call volume and publish information for specific customers. Submit incident tickets. Self Service Center is a secure web portal that enables your... Read More
  • Self-Contained Biological Indicator (SCBI) By NAMSA

    NAMSA offers Self-Contained Biological Indicators (SCBI) for monitoring steam, Ethylene Oxide and Hydrogen Peroxide sterilization processes. Each SCBI unit consists of a vial with cap, a crushable glass ampule with recovery media, and a disc inoculated with spores. NAMSA SCBIs offer a reduced... Read More
  • SEMICONDUCTOR LITHOGRAPHY SYSTEMS By OAI

    OAi is a global leader for over 35 years producing precsion lithography equipment for the Semiconductor Industry. Products range from table top mask aligners to automated mask aligners for production, UV light sources and edgebead exposure systems. OAI is also a global leader in Light... Read More
  • Sensor Wires By Sandvik Palm Coast

    Sandvik Palm Coast manufactures precision wire for medical sensor applications. Medical sensor applications demand specific material properties, both in the wire and the coating. The Sandvik program offers a wide range of wire material grades with coatings such as Polyimide, Polyamide, and... Read More
  • Sensors By Freescale Semiconductor

    Expanding on its more than 30 year sensing history, Freescale Semiconductor has unveiled a new era of sensing with the Xtrinsic portfolio. This new brand of sensors is designed with the right combination of intelligent integration, logic and customizable software on the platform to deliver... Read More
  • Series 1206 By EFC/WESCO

    EFC Series 1206 are polypropylene and foil capacitors. This series offers the advantage of superior stability, high insulation resistance, low dissipation factor, negative temperature coefficient and high frequency operation, dv/dt ratings in excess of 1000 V/ms. Suggested applications include:... Read More
  • Series 1213 By EFC/WESCO

    EFC Series 1213 are metallized polypropylene capacitors. This series offers the advantage of superior stability, self healing, high insulation resistance, low dissipation factor and high frequency operation. Suggested applications include: timing circuits, switch mode power supplies (SMPS).... Read More
  • Series 1306 By EFC/WESCO

    EFC Series 1306 are polyester and foil capacitors. This series offers the advantage of small size and low cost, dv/dt ratings in excess of 1000 V/ms. Suggested applications include: medical electronics, telecommunications. Packaging options include: wrap and fill (TC, TF), axial lead box (EC,... Read More
  • Series 1313 By EFC/WESCO

    EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of small size, self healing and low cost. Suggested applications include: medical electronics, telecommunications and high voltage power supplies. Packaging options include: wrap and fill (TC, TF), axial lead... Read More
  • Series 1613 By EFC/WESCO

    EFC Series 1613 are metallized polycarbonate capacitors. This series offers the advantage of miniature size, superior stability, self healing, high insulation resistance, low dissipation factor and high frequency operation. Suggested applications include: timing circuits, filters, high current... Read More
  • Series 1906 By EFC/WESCO

    EFC Series 1906 are polystyrene and foil capacitors. This series offers the advantage of extremely high insulation resistance (IR), low dissipation factor and very low dielectric absorption. 1906 have a linear negative temperature coefficient. Applications include: timing circuits and filters.... Read More
  • Series 204 and 304 Solenoid Valves By Parker Fluid Control Division

    Parker Fluid Control Division offers the choice of a tab or integrated coil as part of its Series 204 and 304 solenoid valve lines. The options feature flexible production possibilities for long-lasting valves that can operate under maximized pressure ratings. The 204 and 304 Series is a... Read More
  • Series 819 EZ Extrusion Die By Guill Tool & Engineering Co., Inc.

    The Series 819 EZ, a two stage bolt system with the FeatherTouch™, eases adjustment and enables superior sealing capabilities. With Series 819 EZ system, removal of the die holder is quick, and total cleaning of the body and the diverters is assured. After the thorough cleaning, reassembly is... Read More
  • Series CV 500—New Continuous Vulcanization Extrusion Tooling By Guill Tool & Engineering Co., Inc.

    The new CV 500 Series offers the modular design of the 800 medical series as well as the successful polymer/rubber heads for the highest accruing, improved temperature control, decreased material volume for ultra-precision, plus easier and faster adjustment and cleaning processes of the... Read More
  • Service Products By Regloplas Corporation

    With the D3 descaling unit for water systems, descaling agent REM 93, corrosion inhibitor RK 93 and system cleaner SR 80 for oil circuits, Regloplas offer their customers optimal assistance for maintenance. Systematic Regloplas methods also in service: Descaling of water and steam systems as... Read More
  • Servo Motors & Drives By Servo2Go.com Ltd.

    >Servo Drives >QuickStart Kits >Servo Motors >DC Mini Motors >Integrated Motors (Servo) >Power Supplies & Accessories >AC & DC Permanent Magnet Motors & Gearmotors Read More
  • Shaft Collars By Ruland Manufacturing Co. Inc.

    Ruland manufactures shaft collars in a variety of styles with bore sizes ranging from 1/8" to 6" and 3mm to 150mm. Materials include black oxide, 303 and 316 stainless steel, high strength aluminum, zinc plated steel, and engineered plastic. All shaft collars are single point faced to ensure... Read More
  • Shaft Manufacturing Services By AmTech International

    AmTech will manufacture your metallic or plastic shaft to print specifications at our state-of-the-art manufacturing plant. AmTech International’s TS16949 / ISO9001 certified shaft manufacturing team have more than 20 years of experience as precision shaft manufacturers. Whether you have a... Read More
  • Sheet - Special Purpose Metals and Alloys By Ed Fagan Inc.

    If you need specialty metals or alloys sheet for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of sheet products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut back on your... Read More
  • Sheet Metal By Southern Spring & Stamping

    We are a full service precision sheet metal fabricator specializing in the medical, defense and technology industries. Our manufacturing space houses the most efficient state-of-the-art computerized equipment available. Our highly trained techicians will meet all your fabricated sheet metal and... Read More
  • Sherline Miniature Machine Tools By Sherline Products Inc.

    Small metal prototype parts no longer have to be sent out to a machine shop. You can make them yourself right in your own lab or office to shorten development time. Precision miniature machine tools put prototype and small production parts back under your control. Available in inch or metric... Read More
  • Shielded Honeycomb Filters By Spira Manufacturing Corporation

    Spira’s family of exceptional honeycomb filters includes our Shielded Fan Filter, as well as our popular Econo-Cell, Spira-Cell, and Brass-Cell Shielded Air Vent Filters. All Spira honeycomb filters include the “Spira Advantage” as described below. Read More
  • Shielding Effectiveness Test By Keystone Compliance, LLC

    Shielding effectiveness testing determines the ability of material to reduce the electromagnetic field in a space by blocking the field with barriers made of conductive and/or magnetic materials. Shielding effectiveness testing can be applied to a broad range of radio... Read More
  • Shipping Cases By ATS Cases, Inc.

    ATS shipping cases are built tough to take the kind of punishment that automatic handling and common carriers can inflict and more important they're engineered to protect your valuable equipment trip after trip, year after year. We offer both molded shipping cases and custom shipping cases to... Read More
  • Shoe Covers By Blue Thunder Technologies Inc

    Polypropylene shoe covers are impervious to moisture, non-linting, and anti-static. The polypropylene cover works well in a clean room environment. This non-woven fabric helps filter particulates for contamination control in critical environments. Polyethylene shoe covers are impervious to... Read More
  • Short Run Molding By PTI Engineered Plastics Inc.

    PTI realizes the value of reducing lead-times and getting your products to market quickly. We specialize in our RME™ (Rapid Market Entry) process. For your injection-molded products, this not only requires a skilled management team, but a committed culture, overseeing such activities as the... Read More
  • Shot Peening Systems By Guyson Corporation

    A full range of automated and robotic shot peening machines for controlled surface treatment in accordance with SAE specifications, including AMS 2430 and AMS 2432. Guyson automated and robotic shot peening systems are available with SCADA controls to support NADCAP and ISO 13485 quality system... Read More
  • Shrink sleeves By Topflight Corp.

    A fully recyclable, clear plastic film that offers superior printing and consistent shrinking in an environmentally friendly product made from plants. With a 75% shrink at 85°C, they can shrink at lower temperatures than petroleum products to save energy. For detailed branding and technical... Read More
  • SIA-Series Robots By Yaskawa America, Inc. - Motoman Robotics Division

    Motoman's SIA-Series (slim, in-line arm) robots feature a revolutionary 7-axis design with best-in-class wrist performance characteristics that enables amazing freedom of movement, coupled with the ability to maneuver in very tight areas. Short axis lengths and extreme motion flexibility allow... Read More
  • Sideweld Bag Machines By Moreland International Corp

    42" and 56" oth split and solid roll models. Servo driven draw rollers. Sevelr standard options. 250 CPM based on 10" draw at .001 mil poly. Read More
  • Sigma express By Statgraphics

    STATGRAPHICS Sigma Express is an "add-in" for Microsoft Excel that enables users to perform various calculations required when learning or applying Six Sigma. It adds a menu selection to Excel containing sections for each item of the DMAIC paradigm (Define, Measure, Analyze, Improve and Control)... Read More
  • Silbrade® Medical By NewAge Industries/AdvantaPure

    SILBRADE MEDICAL’s construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good manufacturing procedures, including lot traceability, are applicable to all Class VI ingredients. SILBRADE MEDICAL is a... Read More
  • Silcon® Medical By NewAge Industries/AdvantaPure

    SILCON MEDICAL tubing is made in accordance with Good Manufacturing Procedures and conforms to the biocompatibility requirements of USP Class VI. SILCON MEDICAL’s surface properties resist sticking and encrustation, and will not support bacteria growth. The tubing is soft, pliable, and contains... Read More
  • Silcon® Med-X By NewAge Industries/AdvantaPure

    SILCON MED-X tubing is made under strict accordance with Good Manufacturing Procedures and conforms to the biocompatibility requirements of USP Class VI. SILCON MED-X’s surface properties resist sticking and encrustation, and it will not support bacteria growth. The tubing is soft, pliable,... Read More
  • Silicone Castings By Forecast 3D

    The world of silicone is very different from other shore A materials and hold a unique advantage over many as well. We take advantage of these unique physical properties by utilizing several of our processes to produce silicone parts for prototypes and short run production applications. Often we... Read More
  • Silicone Injection Molding By Polymer Conversions, Inc. - Plastics Technology Center

    SILIKON Technologies uses a documented, scientifically developed and obsessively monitored injection molding process. The systematic approach includes determination of fill, cavity-to-cavity balance, statistical analysis of both process parameters and product, process limit specification,... Read More
  • Silicone Injection Molding - Silicone Rubber Molding By Medco Molds Inc.

    If you are searching for quality liquid injection molding services and are in need of specific silicone molding products, contact Medco Products. A leader in the industry of silicone injection molding and all types of liquid injection molding, we can service your corporation with the highest... Read More
  • Silicone Keypads and Parts By PGI Technologies

    Contact Carlos or Mike at 858-560-8213 for your Medical Device discount or E-mail carlos@pgisd.com or mikes@pgisd.com PGI is ISO a certified supplier of Silicone rubber keypads and parts, PGI offers unrivaled quality and cost PGI excels in compression molded products - principally Silicone... Read More
  • Silicone Molding By ProMed Molded Products Inc.

    Silicone has unique material characteristics that enable parts to be molded with intricate features, significant undercuts, surface finishes, and tight tolerances. ProMed offers custom compounding to meet the performance essentials of your design. From concept to existing production, whether... Read More
  • Silicone Products, Molded By KDL Precision Molding Corp.

    KDL Precision Molding specializes in the Custom Molding of Medical (USP Class VI) & FDA Rubber Products. Our capabilities include Liquid Injection (LIM) of LSR (Liquid Silicone Rubber), Compression and Transfer Molding along with rapid prototyping, short and long production runs. Engineering... Read More
  • Silicone Rubber Keypads By Epec Engineered Technologies

    Epec Engineered technologies designs and manufactures all types and configurations of silicone rubber keypads for a wide range of industries and applications. For both large and small customers we provide engineering and design assistance to make sure that your keypads exceeds all of your... Read More
  • Silicone Tubing and Hose By Trelleborg Sealing Solutions

    Trelleborg Sealing Solutions manufactures a complete line of medical and food grade silicone products for the life sciences and processing industries that meet U.S. Pharmacopeia (USP) Class VI standards. These include ultra-pure silicone hose and tubing (standard, custom, peristaltic pump,... Read More
  • Silicone Tubing and Molding By Qure Medical

    Complete silicone Extrusion and Molding. MED offers Extruded tubing and profiles that include multi-lumen and barium stripe capabilities. MED also offer all types of molding including cold runner LIM as well as transfer and compression. Read More
  • Silicone Tubing Material By Axiom Medical Inc

    Axiom® manufactures products utilizing a wide variety of grades of material, from USP Class VI grade, US food grade, A-A-59588A to commercial silicone rubber. Axiom®'s specially formulated materials produce an ultra smooth surface minimizing surface tension and maximizing flow performance. Read More
  • Silk Screen Printing Services By Graphic Communications Inc.

    GCI strives for long term and multi-service partnerships with our clients, providing high quality label printing, quick and innovative solutions, on-time and on-spec delivery and all the related services necessary help our clients succeed. With that approach in mind, GCI offers comprehensive... Read More
  • Silk™ By Mactac

    Silk™ ultimate adhesive systems from MACtac® Medical Products offer solutions for a range of adhesive levels – Soft Touch, General Purpose and Extra Strength – ideal for sensitive skin, short-term applications and extended-wear applications. The various adhesive strength levels provide... Read More
  • SilverDust™ D2-IG Controller By QuickSilver Controls Inc

    The SilverDust D2 is an OEM servo controller/driver for QuickSilver Controls' line of I-Grade NEMA 11, 17, 23, and 24 frame motors. The SilverDust D2 features a 15 pin interface connector, SilverLode Multiple Interface (SMI) Port, including 7 TTL IO, RS-232/RS-485, and system power input. Read More
  • SilverDust™ D2-MG Controller By QuickSilver Controls Inc

    The SilverDust D2-MG is our smallest servo controller. Its open frame design and motor winding breakout is ideal for OEMs driving a 3rd party motor in either open loop (no encoder) or closed loop. The D2-MG comes standard with an SMI port, including 7 TTL IO, RS-232/RS-485, and system power input. Read More
  • SilverSterling™ S2 Controller By QuickSilver Controls Inc

    The SilverSterling S2 is an OEM servo controller/driver for QuickSilver Controls' line of I-Grade NEMA 11, 17, 23, and 24 frame, but is also capable of driving 3rd party DC brushed and voice coil motors. The SilverSterling features a 15 pin interface connector, SilverSterling Interface Port... Read More
  • SIMS 1284+ Helium Leak Detector By Leak Detection Associates Inc

    Leak Detection Associates manufactures high sensitivity leak detection systems for the pharmaceutical, medical device and food industries. Our current version/model is called the SIMS 1284+ {SIMS = Seal Integrity Monitoring System}. By using helium as the tracer gas {per ASTM 2391-05}, packages... Read More
  • Simulated Service Testing By Massachusetts Materials Research, Inc.

    Research shows that a large number of service related failures are the result of fatigue or other mechanically induced causes. And you can avoid the unexpected catastrophe of premature failure by having your products or devices tested under a variety of simulated conditions. Read More
  • Single Cavity Injection Molds By MedMolds

    We specialize in making single cavity injection molds for low volume production of plastic components used in the manufacturing of medical devices. Send us your print, sketch or even a brief description of what you are looking for and we will get back to you with cost and time. Read More
  • Single Lumen Tubing By Sunlite Plastics Inc.

    Tubing is manufactured to your specifications including cut to length, spooled or individually coiled and twist tied. In-house compounding combined with state-of-the-art technology enables us to offer cost-efficient high quality tubing. Read More
  • Single Use Devices By Sanbor Medical

    From simple plastic disposable parts to complex mechanical and electro-mechanical Single Use Disposable devices, our manufacturing unit has the capability and experience to ramp up your product to the production volumes you need in as short a time as possible, maximizing your time to market. We... Read More
  • SINGULA By Integrated Engineering Software

    SINGULA, created with the same leading edge technology as INTEGRATED Engineering Software’s world renowned low frequency electromagnetic design tools, is your best choice for applications requiring high frequency electromagnetic analysis. Utilizing Method of Moments (MoM) technology or the... Read More
  • Sirius Thermal Transfer Ribbons By Dynic USA Corporation

    Dynic USA Corporation provides a full lineup of thermal transfer ribbons in it’s Sirius® brand products, including wax, wax-resin, resin, near-edge, color, and specialty application (for fabrics, etc). Sirius® thermal transfer ribbons are used for printing bar codes, shipping and warehouse... Read More
  • Sizing Tanks By Boston Matthews

    Boston Matthews range of cooling & sizing tanks are designed to match your exact applications requirements: Vacuum Tanks Spray Tanks Water Tanks Multi Pass Tanks Zipper Tanks Medical Tanks Customized Tanks Read More
  • SKF Telescopic Pillar for Infant Care By SKF USA Inc.

    Combining robust, silent lifting, short retracted length and a wide degree of design flexibility, the SKF Telescopic pillar for infant care (series CPMB) is a complete, IEC 60601-1 compliant solution. Developed to help designers and manufacturers optimize equipment for performance and cost,... Read More
  • Skin friendly label By Topflight Corp.

    A later design of the full oximeter piece. A strong, permanent adhesive on the bottom layer adheres to the sensor that monitors oxygen in the surgical patient's blood. A second, skin-friendly, hydrocolloid adhesive goes against the patient, and is protected under the top layer. The top layer is... Read More
  • Slick Sil® By Surface Solutions Group

    Surface Solutions Group has developed a totally conformable yet flexible and low friction Slick Sil® LSR coating for silicone rubber that is bonded chemically. Slick Sil® LSR is a replacement for parylene, which is a physical bond and tends to crack. This dramatic low friction coating for... Read More
  • Slotted Sterilization Trays By Molded Fiber Glass Tray Co.

    MFG Tray sterilization trays are molded from high-strength, glass-reinforced composites. These specially slotted containers are designed for years of severe service in harsh gamma and autoclave environments. The outstanding physical properties for which these trays are known are a result of the... Read More
  • Slow-Drying Citrus-Based Flux and Adhesive Remover By MicroCare Corp

    This benchtop cleaner is a powerful, high-purity flux remover and degreaser. It is the only citrus-based aerosol cleaner on the market engineered for benchtop use because it is made without surfactants or additives that would require rinsing. This naturally derived solvent dissolves many rubber-... Read More
  • SM17205D By Moog Animatics

    SmartMotor™ is an integrated motor, controller, drive amplifier, encoder and communications bus all built into one with a NEMA 23 frame size. Read More
  • SM23165D By Moog Animatics

    SmartMotor™ is an integrated motor, controller, drive amplifier, encoder and communications bus all built into one with a NEMA 23 frame size. Read More
  • SM23165MT-IP By Moog Animatics

    SmartMotor is an integrated motor, drive amplifier, encoder and communications bus all built into one with a NEMA 23 frame size and higher torque with an optional IP65 or IP67 rating. Read More
  • SM34165D By Moog Animatics

    SmartMotor is an integrated motor, drive amplifier, encoder and communications bus all built into one with a NEMA 34 frame size. Read More
  • SM34165MT-IP By Moog Animatics

    SmartMotor is an integrated motor, amplifier, encoder and communications bus all built into one with a NEMA 34 frame size and higher torque with an optional IP65 or IP67 rating. Read More
  • small Hole EDm Hole drilling By Wire Cut Company , Inc

    Wire cut Can EDM drill down to .008 Dia, max thickness .063 we have many years in small hole drilling. Read More
  • Small Part Plastic Injection Molding By Master Tool and Mold Inc.

    Master Tool and Mold has evolved into an advanced facility that is able to run “lights out” automated injection molding for large quantity runs. Quality inspections are performed regularly to ensure the specifications are met and the production process is running efficiently. The company runs... Read More
  • Small Part Plastic Injection Molding Prototyping By Master Tool and Mold Inc.

    If you have a project where you want to find out if the part will function and work properly, Master Tool is able to provide prototype services and produce a small quantity of parts. We are able to do a single cavity prototype in aluminum or steel. Once production and maintenance of the... Read More
  • Small Part Plastic Injection Molding R&D Design By Master Tool and Mold Inc.

    Master Tool and Mold has a complete facility, an experienced staff, and can run fully automated for three shifts with around the clock capabilities. The company specializes in small parts up to 1” cubed in diameter and provides consistent repeatability of high quality part production. The... Read More
  • Small Part Plastic Injection Molding Storage & Delivery By Master Tool and Mold Inc.

    The Master Tool & Mold facility features a vast storage area to warehouse materials and finished parts to ensure on-time delivery. This is tied directly into the company’s packaging department where products can be packaged by weight count, bags, seal-bagging and boxing. The facility can handle... Read More
  • Smart Cord - Electronic Power Conditioner By Smart Power Systems

    Computer Grade Filtering for Limited Spaces Ensures Maximum System Uptime. The ergonomic design of the Smart Cord makes it ideal for environments where computer grade filtering is required but space is limited. The Smart Cord is an electronic power conditioner equipped with “smart ground”... Read More
  • SmartGripper 2.1 By Applied Robotics Inc

    Applied Robotics’ Smart Gripper 2.1 is scalable to take on any application where efficiency and flexibility are a concern. Promising greater precision and a more user-friendly programming interface, it is the only small, stepper-based gripper that offers easy integration with most commercially... Read More
  • SmartNet II - Data Line & Signal Protector By Smart Power Systems

    SmartNet II - The revolutionary data line and signal protector with easy ground connection. Smart Power Systems offers the revolutionary SmartNet II to provide protection for data line and signal for phones, networks, TVs and security systems. Lightning surges and spikes can sneak into the... Read More
  • SMD275 By Conversion Devices , Inc.

    The SMD275 Series of single output Medical power supplies is now available with a low profile fan cover accessory. This allows the Medical OEM to package the power source in a dimension of 2.05"H x 8.0"L x 5.0"W. The SMD275 series features power factor correction (PFC) for use in systems for... Read More
  • SMD350 By Conversion Devices , Inc.

    The SMD350 Series of single output Medical power supplies offer a high-quality power source for the most demanding medical systems. The SMD350 series features power factor correction (PFC) and a wide input voltage range of 90-264VAC operation for use in medical devices worldwide. These models... Read More
  • SMM200-7 By Conversion Devices , Inc.

    The SMM200-7 seven-output medical power supply, which the company claims offer a high-quality power source for the most demanding medical system applications. The SMM200-7 model incorporates: 90Vdc high voltage output, low leakage current and power factor correction (PFC) with a wide input... Read More
  • SMM201 By Conversion Devices , Inc.

    The new high-density, low leakage 200-Watt medical power supply features a wide range 85-264 VAC input with active power factor correction to minimize input harmonic distortion. The SMM201 measures a mere 1.39" H x 3.0" W x 5.0" L with a power density of 13.33 watts/in3. The unit delivers its... Read More
  • Snubbers By EFC/WESCO

    Over the recent past, new technologies have increased the demand for high current power capacitors with high reliability and condensed size. EFC has designed a series of Snubber / Power Capacitors specifically for these requirements. With design requirements of low inductance and power... Read More
  • Soft Magnetic Alloys By Ed Fagan Inc.

    Ed Fagan Inc. has a large inventory of Soft Magnetic Alloys. These alloys are easily magnetized and demagnetized. They are uniquely suited for specialized applications that require high permeability, low losses, and low residual magnetism. Only several alloy families meet these characteristics.... Read More
  • SOFTAL By 3DT LLC

    Adhesion Guaranteed! SOFTAL designs and manufactures innovative and powerful corona and plasma surface treatment for paper, plastic, metal and textile surfaces, even plastic boards and foam. Fifty years of surface treating experience have made SOFTAL one of the key players in this industry.... Read More
  • Software and Hardware Development By Joule Technologies

    TURNKEY SOLUTIONS ICT AND FVT SOFTWARE AND HARDWARE DEVELOPMENT Joule has been working with partners worldwide for over 10 years who are experts in test development. The strategic locations of our partners allow for an effortless installation into local manufacturing sites. In-Circuit Test... Read More
  • Software Design and Development By DeviceLab, Inc

    Nearly all DeviceLab projects include electronic systems design and software development. Our extensive team includes Electrical and Electronic Engineers, Systems Engineers and Software Programmers. Areas of expertise include... Software Design and Development: Firmware Programmable Logic FPGA,... Read More
  • Software Development By Promenade Software Inc.

    Promenade Software provides contract software development services for regulated devices. We specialize in advanced software technologies for the entire device software stack, engineering your system for robustness, security, and safety. Read More
  • Software Engineering By Stratos Product Development

    We provide software solutions with a focus on the end-user experience. Our team communicates with clients to establish a clear set of requirements and a design approach to meet market, functional and end-user needs. We rely upon talented developers and a proven process to deliver high-quality... Read More
  • Software Validation By Promenade Software Inc.

    Promenade software will handle the software V&V for your instrument. As needed for your submission, our test team will write up your test plan, create robust test cases, and provide a resultant report and trace matrix. But we go much further than those basic requirements to insure your device... Read More
  • Software Verification & Validation By Sunrise Labs

    Sunrise Labs provides full and efficient Software Verification and Validation services. SW V&V is a process for proving that software meets its requirements and fulfills its intended purpose. Performing this process efficiently requires technical and regulatory judgment to determine which... Read More
  • Solenoid Pinch Valves By Clippard

    Clippard's NPV Series Miniature Pinch Valves are solenoid-operated devices that ares designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or... Read More
  • Solenoid Valves By Gems Sensors & Controls

    The A Series solenoid valve gives you a highly adaptable design for practically all applications requiring flow between CV 0.019 and 0.300. This robust 2- or 3-way miniature solenoid utilizes a stainless steel body to resist corrosion for most acids, alkaline solutions, and harsh environments.... Read More
  • Somos NeXt By InterPRO LLC

    InterPRO is now offering Somos® NeXt for hi-resolution SLA models and prototypes. NeXT is a next generation material offers SLS-like toughness with the accuracy and definition of SLA. NeXT prototypes are ideal for use in functional testing applications as well as low-volume manufacturing... Read More
  • Sonics' 15 kHz Ultrasonic Welder By Sonics & Materials, Inc.

    Sonics' 15 kHz ultrasonic welding equipment is designed for welding medium to large-size parts at higher amplitudes and lower frequency. Plastics assembly at the 15 kHz frequency permits the welding of many softer plastics with greater far field distances than is possible with conventional 20... Read More
  • Sonics' 40 kHz High Frequency Welder By Sonics & Materials, Inc.

    Sonics' 40 kHz ultrasonic welding system enables welding of delicate, small, close-tolerance assemblies where applied pressure and ultrasonic vibrations need to be minimized. These fast, precise and virtually inaudible models are ideally suited for plastics assembly with products such as printed... Read More
  • Sonics' Hand Held Welder By Sonics & Materials, Inc.

    Weld by digital time and/or energy with Sonics’ 500 watt ultrasonic hand held welding systems for manual assembly operations, such as spot welding, staking and inserting. Available in 20 and 40 kHz frequencies, these lightweight hand guns feature autotuning, programmable time, energy or... Read More
  • Sound Enclosures By Sikora Automation

    Mangaing ambient noise levels in any environment can be challenge which is why Sikora Automation offers Sound Enclosures for your Parts Feeding systems. In addition to serving as a sound reduction system the enclosure can also protect your feeder from the outside elements which may be important... Read More
  • Source Supplier of Cobalt Alloy By Edge International, a Division of Titan Metal Fabricators, Inc.

    Edge International in Dayton, Ohio, is a specialist source supplier of cobalt-alloy and titanium-alloy bar for the forging and machining of orthopedic implants. Management at Edge works with our customers to provide cost effective solutions to satisfy pricing requirements and materials... Read More
  • Source Supplier of Titanium Alloy By Edge International, a Division of Titan Metal Fabricators, Inc.

    Edge International in Dayton, Ohio, is a specialist source supplier of cobalt-alloy and titanium-alloy bar for the forging and machining of orthopedic implants. Management at Edge works with our customers to provide cost effective solutions to satisfy pricing requirements and materials... Read More
  • SP Series Stepper Gearmotors By Servo2Go.com Ltd.

    The SP Series NEMA standard 2 phase 1.8 degree hybrid stepper gearmotors offer high torque in a compact lightweight housing. These offset light duty gearmotors are ideal for rotary indexing and positioning applications. Available in Nema 17 & Nema 23 frame sizes, the SP Series Stepper... Read More
  • Spare Parts, Field Service & Factory Refurbishment By Atlas Vac Machine, LLC

    Atlas Vac Machine has historically listed OEM component numbers in the equipment service manual to enable our customers to procure spare parts on a local basis. Of course, these parts can also be obtained through the Atlas Vac factory. All other part numbers listed in the manual are available... Read More
  • SPB-3 Reciprocating Screw Blow Molding Machine By Rocheleau Tool & Die Co. Inc.

    APPLICATIONS: Medium volume container production, custom molding, quick change applications, short run or long run processing. OUTPUT: 15" or 18" wide clamp options, 57mm (2.25") extruder, over 1 pound (500 gram) shot capacity. CONFIGURATIONS: SPB-3 systems are designed in a modular... Read More
  • Spec Summary By EFC/WESCO

    EFC Spec Chart Read More
  • Special Barrels, Cylinders and Liners By WEXCO Corporation

    Wexco manufactures custom and special design cylinders and liners used for various food, chemical, rubber, silicon, mineral and pharmaceutical applications. Weather the application includes pumping, melting, heating, cooling, crystallization, reaction control, extrusion, injection, blending or... Read More
  • Specialized Industries By Custom Converting, Inc.

    Custom Converting, Inc. is your single source for precision die cutting, laminating, pouching (liquids, powders, die cut parts), slitting and rewinding, sheeting, assembly and packaging. We service clients throughout California (San Diego, Los Angeles), Oregon, Nevada, Arizona and beyond. CCI... Read More
  • Specialty Heaters By Watlow

    Watlow specialty heaters are designed for thermal applications where high performance is required, and fast response and uniformity are essential. Specialty heaters from Watlow have design flexibility to meet different applications requiring different construction methods. This flexibility... Read More
  • Specialty Injection Machines By Sodick IMM / Plustech Inc.

    Special Configuration of injection molding machines is available up on request Read More
  • Specialty Needles By ISPG, Inc.

    ISPG will work with you to design custom needles to suit your exact requirements. From custom tubing sizes, to surface finishes, to specialty geometry, ISPG will work with you from the design phase and supply a custom needle to meet your exact needs. Specialty NeedlesWe are pleased to provide... Read More
  • Specimen Machining By Laboratory Testing Inc.

    Laboratory Testing uses computerized numerical control (CNC) equipment to prepare the highest quality test specimens from metals including metal matrix composites, hardened steels and nickel-base alloys, and some plastics. EDM services also are available. Our test specimen machining is performed... Read More
  • Spencer Impact Tester By Thwing-Albert Instrument Co.

    The Spencer Impact Attachment was developed for use with Thwing-Albert's Elmendorf Tear Tester. It provides a convenient method for determining the impact resistance of plastic films and packaging materials under conditions that closely approximate the strain rates that the material is subject... Read More
  • Spin Welders By Dukane

    Two standard models of servo controlled spin welders are available. The first model has servo control of the rotational axis with the ability to program the final orientation position with +/- 0.1 degrees, and a pneumatically operated Z-axis. The second model, includes servo control of the... Read More
  • Spin Welders By Forward Technology Industries Inc.

    Spin Welding is the preferred technique for thermoplastic parts with a circular axis joint which have high bond strength/hermeticity requirements. During spin welding, one part is held stationary in a holding fixture while second part is rotated against it under pressure at speeds up to 16,000... Read More
  • Spinal Implant Testing By Element

    MECHANICAL TESTING OF SPINAL IMPLANTS Element Cincinnati routinely performs mechanical testing of fusion and non-fusion spinal device designs, as well as predicate components, for our clients’ feasibility testing and regulatory submission requirements. Common testing for spinal implants includes... Read More
  • Spore Ampoules By NAMSA

    NAMSA offers spore ampules for use in monitoring the efficacy of steam sterilization processes. Spore ampules are ideal for use in validation of liquid sterilization cycles. No activation is required; simply expose spore ampule to sterilization process and incubate. Spore ampules are available... Read More
  • Spore Suspensions By NAMSA

    NAMSA Spore Suspensions are pure suspensions of viable spores from specific organisms of known resistance to various sterilization processes. They are suspended in water for injection and provided in pharmaceutical vials containing 10 mL of suspension. NAMSA Spore Suspensions may be used for... Read More
  • Spread Spectrum Clock Oscillator By Mercury United Electronics

    This low EMI Spread Spectrum Clock Oscillator is designed to reduce EMI by an average of -12dB without having to change your board design. Available in drop-in replacement 5x3.2mm, 5x7mm, Full Size & Half Size DIP RoHs Compliant packages. Ideal for Medical, RFID & Printer applications and many... Read More
  • Spring Return Dead Man Handle Ball Valve By S&K AUTOMATION

    Ball Valve with spring return deadman handle is used for sampling, filling containers, draining tanks and other applications. If the operator release the spring handle, the valve will return to the closed position. It could also be used to fail open if desired. Features include: Live loaded... Read More
  • Spring-Loaded Connectors By Mill-Max Mfg.Corp.

    When the power is on, you don’t want shock or vibration to create spurious signals. Mill-Max Spring-loaded Connectors provide a reliable electrical connection in the most rigorous environments: • Maximum Continuity: Precision-machined gold-plated components and a low-resistance spring... Read More
  • Springs By Acme Monaco

    Acme Monaco specializes in the design and manufacture of critically-precise, custom springs, coils and wire forms for medical equipment and applications. Engineered using our proprietary processes, our precision springs provide exceptional quality with high tolerance. Read More
  • Springs & Wire Forms By Southern Spring & Stamping

    We specialize in the design and production of extension, torsion and compression springs for industries where precision manufacturing techniques are of paramount importance. Combining skill and experience with state-of-the-art technology, we produce a wide variety of customized springs and wire... Read More
  • Sprinter Marking Machine Ink By Sprinter Marking, Inc.

    Sprinter Marking offers a wide range of industrial marking ink types to suit a range of customer requirements. Some of the more common types and colors are described on our website. Quick drying pigmented inks are available in a range of colors. Read More
  • sputter coater Q150T S By GaLa Instrumente GmbH

    electon conductive layers for thin film technology and electron microscopy. Touch screen interface for the user enables to call and store recipes, set and change parameters and follow process for repeatable results. Read More
  • SRZ Modular System By RKC INSTRUMENT INC

    The SRZ is a DIN rail mounted high-density modular system with a sample cycle time of 250ms and a 0.2% accuracy. Control method is selectable between position proportional control and cascade control in addition to heat only and heat/cool methods. A quick rise/drop to setpoint gives greater... Read More
  • SSH Electric Steam Superheaters By Sussman Electric Boilers

    Designed to your special heating requirements, the Sussman Series SSH steam superheaters are suitable for the heating of saturated steam under pressurized conditions adding BTU s to increase the quality and raise the temperature of saturated steam to match your process requirements. The SSH... Read More
  • Stability Testing By Cincinnati Sub-Zero

    CSZ provides stability testing, accelerated aging, shelf life testing, and package testing services. We offer a full range of temperature & humidity chambers that meet various test specifications including ASTM, ISTA, ICH Q1A and other test standards that involve temperature & humidity testing. Read More
  • STAC5 Microstep Driver with Indexer By Servo2Go.com Ltd.

    The STAC5 provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times. The STAC5 is... Read More
  • Staffing Services By Apple & Associates Inc.

    The present economy and “Boomer” retirement phenomena are driving change in hiring patterns. Each year our companies find themselves in uncharted employment territory with unexpected staffing challenges. Apple & Associates understands these challenges and will partner with you to solve them by... Read More
  • Stage, Orchestra and Piano Lifts By SERAPID, Inc.

    SERAPID, Inc is a full service provider from engineering to installation of stage and orchestra platform lift systems. Read More
  • Stainless Steel Angled Roll-O-Matic Self Wringing Mops By FHP

    • Use in all Controlled Environments • Self-Wringing Angled head design allows use of the entire foam head with each stroke • Larger diameter handle allows users to easily hold handle for longer periods of time • Improved components allow for no sharp edges and excellent refill retention •... Read More
  • Stainless Steel Cylinders By Humphrey Products Corporation

    Round pneumatic actuators in single and double acting types with stainless steel barrel and rods, aluminum heads and pistons Bore sizes from 1/2 inch to 2-1/2 inches Lightweight models available Various mounting and electrical position sensors available Read More
  • Stainless Steel Electric Steam Boilers By Sussman Electric Boilers

    Sussman SSB Boilers minimize contaminants because all-wetted metal parts are Stainless Steel. Whenever copper, iron or other materials cannot be tolerated in the steam and/or process, a Sussman SSB Stainless Steel Boiler is the product of choice for clean steam. Read More
  • Stainless Steel Enclosures By Rittal Corporation

    Rittal's stainless steel enclosures, junction boxes, and pushbutton boxes, depending on model, feature: 304 or 316 stainless steel construction, screw or hinge covers, 20° overhanging slope-top roofs, knife-edge perimeters, powder-coat finishes, 180° hinges and locks with double-bit inserts,... Read More
  • Stainless Steel Laboratory Workstations By Baygen

    •Long life with stainless steel (1.4301 – ANSI 304) •Through central ventilation system, odorless working environment •Functions working by sensor and manual •Advanced electrical safety system •Formalin waste tank •Special designs to needs and conditions Solutions for Pathology... Read More
  • Stamped Metal Components By Hutchinson Technology

    Hutchinson Technology, Inc is a world leading manufacturer of complex, precision stamped components. Our 20 high speed presses utilizing progressive dies, enable high volume, low cost production of over 25 million precision stamped components per week. With over 30 years of stamping... Read More
  • Stamping By Sureway Tool & Engineering

    If you have high production quantities or items that repeat over several years, you might want to consider hard tooling your parts as stamping helps eliminate costs of secondary forming operations. Tired of rolling the dice with an off-shore supplier? Then look no further! From simple cutoff... Read More
  • Stamping & Fine-blanking By AmTech International

    AmTech International is a TS16949, ISO9001 and QS9000 certified company offering stamping and fine-blanking solutions for OEM customers in the United States, Mexico and Canada. Our capabilities range from 100 to 1,500 ton presses. With the ability to supply from 10,000s - 1,000,000s of pieces... Read More
  • Stampings By Southern Spring & Stamping

    We combine our expertise with advancements in machinery to manufacture precision stampings. We have the ability and experience to produce parts with a variety of alloys from common to exotic, while producing the tooling in house. Our diversity allows us to produce hundreds to millions of... Read More
  • Standard & Performance Fiber By Zeus

    Zeus offers an arsenal of fibers designed to perform in diverse and demanding applications. Properties such as high tensile strength, optical clarity and extreme chemical and temperature resistance define Zeus fibers. These lightweight monofilaments also have superior friction and wear... Read More
  • Standard and Custom Needles By Hamilton Company

    Hamilton Company offers the widest variety of standard and custom needles in the industry. Manufactured from 304 stainless steel and with needle gauges from 10 to 34 and lengths from 0.375 to 12+ inches, almost any needle is possible. Read More
  • Standard Blow-Fill-Seal Dispensers By Unicep

    Our standard blow-fill-seal units are a perfect solution for like-water products. The size ranges allow for very precise dispense needs or a container that resembles a small bottle. The repeatability of BFS machines ensures high quality form and finish. Each unit can be coded to provide... Read More
  • Standard Stock DC Motors By Dart Controls Inc.

    The advantages of DC adjustable speed drives with PM motors for low horsepower applications are: higher starting torque, wider usable speed and torque range, simpler dynamic braking, lower system cost, faster response, smaller size, more efficient and reliable. Standard features include:... Read More
  • Standard Valves and Cylinders By AVENTICS Corporation

    Some life science applications can benefit for our broad range of standard pneumatic valves and cylinders. Our directional control valves include inline and manifold versions, from miniature to large, and from low-flow to high flow, in a variety of materials, types and operators. Many standard... Read More
  • Standards and Management System, Process Improvement Training - Public and Inhouse Solutions By SAI Global Limited

    Each year over 12,000 people partner with SAI Global for their training and business improvement needs. SAI Global is committed to providing you the most current and up-to-date training courses through a wide-range of innovative learning approaches and tool-based solutions to help you better... Read More
  • Statgraphics Centurion XVII By Statgraphics

    STATGRAPHICS Centurion is designed for anyone who wishes to do serious data analysis without investing weeks learning how to use a statistical package. It contains over 180 statistical procedures, covering everything from summary statistics to design of experiments (DOE). Yet you don't need to... Read More
  • Static Control for Cleaning Thermoformed Trays By Simco-Ion

    Thermoforming trays attract dirt and contamination resulting in rejects. Simco-Ion’s Phoenix Static Control Blower installed directly above the delivery of the thermoformed trays offers improved product quality with the reduction of dust and dirt. Read More
  • Static Control for Injection Molding By Simco-Ion

    Injection molded parts can have high static charges which attract airborne contamination, resulting in product rejects. Operators may also experience uncomfortable shocks when working next to the collection bin. A Simco-Ion Phoenix Ionizing Blower provides ionization to quickly neutralize the... Read More
  • Steam Sterilization Data Loggers By MadgeTech Inc

    MadgeTech's steam sterilization data loggers can be used to monitor, record and validate each cycle. This rugged product line includes devices capable of withstanding temperatures up to 150 °C, as well as enduring the sterilizer’s high pressure environment. Each device records data at a... Read More
  • Steel & Ceramic Balls By Boca Bearing Co.

    Starting from the rigorous testing of the wire for all crucial factors, balls are produced in specifically designed machines called Headder, Flasher, Grinder and Lapper. Heat treatment is one of the most important operations that give required strength & hardness to the balls. Heat treatment... Read More
  • Stepper Motor By TELCO INTERCONTINENTAL CORP.

    TelcoMotion's stepper motors are widely used in laboratory automation and clinical analysis equipment such as automated blood sampler, micro plate reader, blood pressure simulator. Our stepper motors are known for their top quality, high reliability, innovation, and advanced technology. They are... Read More
  • Stepper Motors & Drives By Servo2Go.com Ltd.

    >Stepper Motors >Stepper Drives >Integrated Motors (Stepper) >Stepper Motor+Drive Systems >QuickStart Kits Read More
  • Stepper-Controlled Proportional Valves By Clippard

    Utilizing the industry’s most robust and powerful linear actuator, the high-flow stepper-controlled 2-way proportional valve outperforms the competition in performance and durability. The bonded elastomeric seat achieves excellent sealing ensuring smooth opening and fine control at low flow... Read More
  • Stereo Microscope By Jenco International, Inc.

    Superb Depth of Field and Contrast We listened to the needs of experienced users, incorporating advanced technology into a durable, cost effective solution for your microscope needs. Introducing, the GL7 Series from Jenco, delivering brilliance, clarity, parfocality, flatness and depth of field.... Read More
  • Stereolithography By InterPRO LLC

    Stereolithography is the ideal solution for: “Show and tell” parts with smooth surfaces and fine details. Visual prototypes for photo shoots, market testing and checking 3D drawings, Prototypes for limited functional testing, Masters for copying techniques (Reaction Injection Molding & Vacuum... Read More
  • Stereolithography Prototyping By Symbient Product Development

    Stereolithography (SLA) is a technology that we've been watching for several years. We've been waiting for the technology to mature to the point where it is today. SLA substantially reduces the product development cycle. Also, the speed of SLA allows us to investigate more design options which... Read More
  • SteriLink® Supply Chain Visibility By STERIS Corporation

    The SteriLink interactive online service provides complete, real-time visibility into STERIS Isomedix processing facilities. The SteriLink service is designed to shorten time between manufacturing and distribution by allowing you to: - Monitor your inventory, 24/7 - Send and receive alerts -... Read More
  • Sterilization By Advanced Scientifics, Inc.

    After design, assembly and packaging have been completed; Advanced Scientifics will further manage the sterilization of the Single Use System. The company will work closely with partners to sterilize its single use systems via gamma radiation. Advanced Scientifics' Irradiation Validation... Read More
  • Sterilization Indicating Ink By NAMSA

    Inks are available for Steam, Ethylene Oxide (EO), Dry Heat, Hydrogen Peroxide and Steam Formaldehyde sterilization processes. The sterilization indicating ink product lines are suitable for high-speed flexographic, gravure, and screen printing processes and most are certified to ISO 11140-1... Read More
  • Sterilizing Grade Filters By Mott Corporation

    Mott's sterilizing grade filters are biocompatible, impervious to solvents, and compatible with most organic compounds and complex drug chemistries. The media is offered in porous 316LSS as well as titanium and is engineered for external use or for integration into implantable devices. These... Read More
  • SteriPro® Labs By Sterigenics International, Inc.

    Fully accredited and ISO certified, Sterigenics' SteriPro Labs provide a comprehensive range of microbiological and analytical testing services designed to optimize processing and enhance speed to market. Validation services are also available to verify testing procedures. Read More
  • Sterlization Supplies By Qosina Corp.

    Qosina offers the largest selection of surgical sterilization supplies to meet your needs. Medical sterilization indicators show a color change to signify proper exposure to various sterilization processes. Medical sterilization indicators are available for EtO (ethylene oxide) sterilization;... Read More
  • STH Low Flow Miniature OEM Metering Pumps & Dispensers By Fluid Metering, Inc.

    The optional ICST02 Intelligent Stepper Controller provides programmable control for all FMI Stepper Pumps. The drive can be configured at the factory to deliver the most efficient performance necessary to control the pump over a wide speed range. Read More
  • ST-H5 Manual Bottle Cap Torque Tester By SureTorque

    The ST-H5 torque meter is a hand held precision instrument for calibrating individual chuck stations on rotary capping machines. With the ST-H5 you can accurately measure the torque applied by each head for the desired torque settings. The ST-H5 enables accurate chuck calibration and reduces... Read More
  • Sticklers® Fiber optic cleaning tools By MicroCare Corp

    Many modern medical devices have digital interfaces to fiber optic networks that allow these systems to quickly move massive data files files and patient images. MicroCare is the world’s leading expert at cleaning fiber optic connectors with tools that are extremely fast, reliable, consistent... Read More
  • STM Series NEMA 24 frame Integrated Motor/Drives By Servo2Go.com Ltd.

    STM integrated steppers are drive+motor units, fusing step motor and drive components into a single device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions. The STM24 integrated steppers combine high torque NEMA 24 step motors with a... Read More
  • STM23 Integrated Stepper Motor with EtherNet By Servo2Go.com Ltd.

    The new STM23 models fuse a high performance motion controller with 100 MBit Ethernet communications to a high torque NEMA23 step motor. Connecting to an Allen-Bradley ControlLogix, CompactLogix or MicroLogix PLC. EtherNet/IP is also available. The STM23Q-2Ex provides 125 ounce inches of... Read More
  • Stock Bottle Offering By Pretium Packaging

    •Over 600 stock bottle designs •Includes PET, HDPE, PVC and PP •Sizes 10CC to 12L •Full range of stock and custom colors •Many “family” product offerings (same style bottle in various sizes) •Price quotes within 24 -48 hours •Samples available •Shop our catalog now Read More
  • Stopcocks By Elcam Medical Inc.

    Elcam Medical's stopcocks and manifolds are designed for worldwide markets. We produce a wide range of stopcocks and manifolds for infusion therapy, including high flow rates and systems, anesthesia, blood related procedures and other viscous fluid applications. Elcam's stopcocks and... Read More
  • STR2 Microstepping Drive By Servo2Go.com Ltd.

    The STR2 is a compact, powerful, digital step & direction driver rated at 2.2 A/phase. This drive is great for OEM applications requiring basic step & direction control of a 2-phase step motor. STR drives feature advanced microstepping performance and sophisticated current control with... Read More
  • Strain Relief Boots By microPEP

    microPEP supplies off-the-shelf and custom Strain Relief Boots. Call and order our 900 Micron Strain Relief Boot, MX-125 molded from Santoprene 251-70W232, Black. Custom sizes and configurations are also available, but would entail an extra tooling charge. Please call microPEP to order or... Read More
  • Stratus By Statgraphics

    Statgraphics stratus is a slimmed down version of Centurion XVII that runs within a web browser. You can enter data directly into the data editor or read data from text files, Excel files, or other common formats. The calculations are performed remotely on a web server and the results are... Read More
  • Striped Tubing By Sunlite Plastics Inc.

    Sunlite has the ability to add a stripe to any of our existing tubing. Stripes can be encapsulated in the wall or on the tube surface, depending on your need. Read More
  • Structural & Component Fatigue Test Systems By TestResources Inc

    Structural Testing Applications typically feature multiple all-electric electrodynamic or servo hydraulic actuators with engineered fixturing. Servo hydraulic systems generally deliver higher loads and speeds, while electrodynamic systems are less expensive and easier to maintain. Our latest... Read More
  • Structural & Reinforced Plastic Compounds By RTP Company

    Structurally engineered thermoplastics are an excellent alternative to metal in applications where strength, dimensional stability, and toughness are important. Reinforced compounds offer dramatic improvements over neat resins in stiffness, tensile strength, load-bearing ability, and other... Read More
  • Structural Enclosures By RIMNETICS Inc

    Reaction Injection Molding (RIM) - provides structural ‘one-piece’ solutions for your enclosures and structural parts. Polyurethane, the material created by the RIM process is injected into the mold (tool) at a very low viscosity where it chemically reacts and cures. Since such a low-viscous... Read More
  • S-type load cell XTS4 By Load Cell Central

    Load Cell Central's XTS4 S-type load cell is a versatile unit designed for use in either tension or compression. Constructed of a plated alloy steel, the combined error including the effects of non-linearity and hysteresis is less than 0.02% of the sensor's capacity. These load cells are used in... Read More
  • Substrate Preclean By Anatech USA

    Plasma process is essential for substrate precleaning at the molecular level. No matter how many rinse steps are used after wet cleaning, some residue remains that can interfere with adherence between the substrate and adhesives, paints, and bonding of other materials. Inductively Coupled Plasma... Read More
  • Suction catheter By Industrias Plasticas Medicas

    Infant suction catheter with manual control cal. 10 fr. Adult suction catheter with manual control cal. 18 fr. Read More
  • Supplier Quality Management By Pilgrim Quality Solutions

    Inspect, track and rate supplier’s quality performance. Read More
  • SUPPLIERtrak Supplier Quality Assurance Software By CyberMetrics Corporation

    SUPPLIERtrak is the most comprehensive software available to track, analyze and monitor your company's suppliers. SUPPLIERtrak maintains a complete database of all your suppliers and the parts that they supply your company. On-line procedures can be maintained for easy reference and inspections.... Read More
  • Support Engineering By Sunrise Labs

    Sometimes a little support is all you need to complete a project. Leverage Sunrise’s expertise to keep your development projects on track. Do you have a medical product that was developed without following “design controls”? We can help put you back on track for your FDA filing. Do you... Read More
  • SurePeel By MDC Engineering, Inc.

    The SurePeel automated seal strength tester is a critical tool for your quality control program. The SurePeel is motorized and utilizes a force transducer to measure the strength of a seal based on ASTM standards. The system is ideal for measuring seal strength of flexible and rigid material... Read More
  • SureTorque Automated Bottle Cap Torque Testers By SureTorque

    We offer bottle cap torque testers suitable for a wide range of environments and applications including harsh wash-down liquid filling lines to pharmaceutical clean rooms. Our laboratory testers offer recipe driven interfaces and 360 degree measurement capabilities ideal for CR-Closures and TEB... Read More
  • SureTorque ST-Inline By SureTorque

    The fully automatic ST-INLINE Bottle Cap Torque Tester automatically samples and tests caps right on the production line without an operator. Bottles are diverted into the ST-Inline testing station, removal torque tests are performed and results are recorded. Rugged design, fast response time... Read More
  • SureVac By MDC Engineering, Inc.

    The SureVac™ allows a user to test a sealed package in a water-filled vacuum chamber to a preset vacuum level for a specific amount of time. Air bubbles are an indication of a leak. An immediate seal failure is indicated by a “burst” of the package in the water. Read More
  • Surface Mounted EMI Gaskets By Spira Manufacturing Corporation

    The surface (or flange) mounted gaskets are used when space is limited, or when the application of a surface mounted gasket is cost effective. Read More
  • Surgery Simulation Device By KDI Manufacturing

    Green Light Simulator is a simulation device that allows surgeons to develop skills for performing laser ablation surgery Fast paced project – 6 months to production Design for Manufacture Full device assembly Developed test equipment Support software installation and... Read More
  • Surgical Devices - Complex Sub-assemblies By Cadence, Inc.

    At Cadence, we know the most sophisticated devices have a high level of complexity that dictates ultimate success in the operating room. It’s the 80/20 rule, where 20% of the complex parts are responsible for 80% of the final success. We make the 20% that is complex and not because it is easy,... Read More
  • Surgical Devices - Finished Medical Devices By Cadence, Inc.

    Cadence operates two dedicated facilities for producing finished products for our contract manufacturing and assembly customers. 28 of the top 30 OEMs trust us as a supplier for our capabilities: Certified ISO Class 8 (100,000) cleanrooms Cleanroom injection molding and laser welding... Read More
  • Sussman ES Packaged Electric Steam Boilers By Sussman Electric Boilers

    Suitable for industries requiring efficient, high quality saturated steam, including laboratories, hospitals, industrial plants, pilot plants, food and chemical processing applications. These versatile generators are perfect for aImost any application requiring steam from 0-100 PSIG. Each unit... Read More
  • SV-2000 By Strainoptics Inc.

    The SV-2000 Strain Viewer is a large-field polariscope suitable for inspection of nearly any size product. The standard viewing area is 400 x 500 mm (16 x 20 inch). The SV-2000 can be set up horizontally or vertically. In clear and translucent polymers, residual strains become visible when... Read More
  • SV690 Stepper Motor Driven Syringe Pump By Valcor Engineering Corporation

    The SV690 series syringe pump module is a direct-drive stepper motor-driven pump that accurately and precisely delivers a wide range of liquids. With dispensing ranges from a few microliters to 12.5 milliliters, the SV690C utilizes standard communication protocols and mounting configurations... Read More
  • SwellEx™ silicone swelling fluid By MicroCare Corp

    Silicone has a long history as being one of the most commonly used materials in the healthcare industry. The biocompatibility of silicone and its physical properties make silicone highly desirable for tubing or molded parts in medical devices However, silicone can be challenging to attach over... Read More
  • Switches By Interpower

    Switches & Voltage Selectors Read More
  • Syringe Technology By Kahle Automation

    Kahle is a worldwide supplier of automation and process equipment for the Medical Device & Pharmaceutical Industries. Dedicated to designing solutions for only one Industry allows us the opportunity to develop the expertise required to build production systems with an understanding of the... Read More
  • SYSPRO ERP Software By SYSPRO ERP Software

    SYSPRO ERP software offers a single solution for companies looking to gain increased operational effectiveness. Available for deployment web-based or on-premise, it requires no more than one installation, greatly simplifying the process leading up to full implementation and... Read More
  • System Design & Architecture By Sunrise Labs

    Great products are planned before they are designed. Our systems experts match technology to problems using configurations that maximize performance and maintainability while minimizing design risk. In addition to our in-house skills in electronics, real-time software and systems, our deep... Read More
  • Systems Integration By Electro-Lite Corp.

    To assure the availability of Electro-Lite as a solutions provider to our customer base, Electro-Lite offers a full complement of in-house mechanical services from conveyor systems and pick and place to fully automated systems design. Applying the combination of our Applications Laboratory and... Read More