High Density Modular Connector -Mixed signal, power, and coaxial modules -Provides up to 200 amp power -Cable to chassis and rack & panel -Plastic backshell with strain relief and half turn quick disconnect jackscrew -Float mountable for blind mating -Configurations compliant to EN45545... Read more »
By Humphrey Products Corporation
The L310 Latching Solenoid Valve has low power consumption and low heat generation offering potentially tremendous energy savings over traditional solenoid valves applications where power is limited or coil heating is unwanted. Standard single solenoid valves require electrical power while... Read more »
The L70 Ball Screw linear system is available in a standard commercial grade and a precision grade. The standard commercial grade uses a rolled ball screw. The precision grade uses a ground ball screw and is built to the accuracy and performance requirements of the customer. The performance data... Read more »
As an original equipment manufacturer (OEM), Tecan is also a leader in R&D, design and manufacturing of OEM instruments and components including laboratory instruments and solutions to biopharmaceutical, forensic and clinical diagnostic organizations that are then distributed by partner... Read more »
Quantachrome's Material Characterization Laboratory offers a very broad range of measurement services in support of research, production, and quality assurance requirements for catalysts, ceramics, pharmaceuticals, abrasives, desiccants, cements, powder metallurgy, carbon blacks, ferrites,... Read more »
Custom, laminated product labels on demand... Some of our customers' label applications require an extreme measure of protection from harsh chemicals and environmental conditions. For years, leading manufacturers of medical devices, power equipment, compressors and electric motors have used... Read more »
Island placement sample featuring dual imprintable areas and an integrated RSS and 2D bar code. Base label was printed on Gallus, top label on the Centraflex, then labels were combined on the old island placment machine (we now do island placement on the Omega). Read more »
There is a general misconception regarding labels and labeling translation in the medical industry. A label is specific to “what’s on the box” or “what’s on the product” (device, drug, or otherwise). Labeling as it applies to the medical industry includes the product label plus other packaging,... Read more »
Custom printed labels for your DYMO® LabelWriter® series printers. These direct thermal labels are guaranteed to work effortlessly with your printer, providing the high quality print results you depend on using materials and construction specifically for DYMO® LabelWriter® printers. We can... Read more »
Contact Carlos or Mike at 858-560-8213 for your Medical Device discount or E-mail [email protected] or [email protected] PGI is ISO a certified supplier of labels and graphic overlays of all type. PGI is a Registered UL Label Supplier delivering regulatory labeling worldwide for over 35 years. We... Read more »
Whether you want to build brand impressions, advise customers of product safety features or clearly identify certification information, Ampco has a product solution to fulfill your needs. We utilize the latest in print and material technology to provide a diverse line of durable labels, decals... Read more »
By CSA Group
Key reasons why CSA Group should be your choice for testing and certifying laboratory, control, and measurement equipment: -Speed to market: CSA Group has the global footprint and local expertise to help you rapidly market your laboratory and measurement equipment around the world -Diverse... Read more »
An economic Laboratory Heat Sealer to help determine the sealing parameters of film, laminated films, coated paper and other flexible barrier materials. The IDM Lab Heat Sealer is used to measure the heat sealability of the web surface or sealant layer of materials. Short dwell time web... Read more »
Model: L0002 & L0003 Series The Laboratory Press is designed for pressing or helping to form samples between two platens. Two digital temperature controllers enable the platens to be heated or cooled and even set process times for heating and cooling. A digital panel meter is used to display... Read more »
By G-M-I, Inc.
Laminated Products consists of roll to roll or roll to sheet water based adhesive laminates supplied in their finished roll or sheet state or die cut into various shapes and sizes for customer specific applications. Read more »
Large ULTRA extruders are fixed horizontal extruders ranging from 4.5" to 12" diameter, any L/D, vented or non-vented. ULTRA extruders are available with air-cooling or water-cooling. The standard ULTRA is well suited for all extrusion applications including pipe, large profile, sheet, cast... Read more »
From small products for embedded OEM applications to rugged laser barcode scanners for industrial use, Microscan offers a wide range of quality products to read linear barcodes and stacked symbols, with features such as high speed reading, wide field of view, symbol reconstruction, and... Read more »
LasX provides contract service solutions, which incorporate laser processing, precision lamination, and assembly, to the microfluidic and related medical device markets. These services are offered in an ISO 13485 certified environment, resulting in superior quality of finished components, ready... Read more »
The part is molded in a standard mold using LDS-grade resin that can be laser activated, the desired interconnect pattern is directly written on the molded part utilizing the LPKF’s scanner based laser systems, and the conductive paths are plated using industry standard electroless plating... Read more »
We offer high-quality silica/silica fiber developed for the high demands of pulsed laser devices. Properties: - ETO-sterilized, double packed (pouch in pouch) - Special high power (SHL) F-SMA905 connector - New F-SMA slim extension sleeve available in various colors, laser inscription... Read more »
Laser Marking is one of the most advanced techniques in product identification. And with our streamline operation, we are able to offer competitive pricing without compromising quality. QCI Hills Laser Marking has earned an impressive reputation for precise, quality workmanship. All jobs are... Read more »
In this process, two plastic parts are joined, each possessing different absorptive characteristics. The laser penetrates the top layer, which is transparent to that wavelength, but is absorbed by the bottom layer. The surface of the bottom layer melts, which in turn melts the adjoining surfaces... Read more »
By PhotoScribe Technologies Inc.
Although many companies sell lasers no one sells turn key laser systems better designed and optimized to deliver a quality mark for your specific application than Photoscribe. For most marking applications, lasers are not optimized "out of the box" and easily "plugged in" to your production... Read more »
By AMTEC
Laser System is a combination of two (2) or more sub-systems which use Laser Technology and other technology for advanced manufacturing processes. Laser is a device that emits highly amplified and coherent radiation of discrete frequencies for several processes including but not limited to:... Read more »
Seam, Butt, Lap, Micro Laser and Spherical Tip Welds. Radiused Wire Ends, Ball Tip Formations, Weld Validations via Beam Energy Validation and Pull Testing, Spot Weld down to <0.004" We are always trying to add value in everything we do for our customers. Many micro wire components are laser... Read more »
Motion Dynamics is always trying to add value in everything we do for our customers. Often times, it is laser welding of micro wire components to produce a wire sub-assembly. We work with our customers to find ways of combining these pieces together to save time and money by eliminating other... Read more »
By Dukane
laser welding systems for thermoplastic materials Read more »
Laser plastic welding with Leister’s Novolas™ systems expands the possibilities of plastic assembly. Leister USA offers a complete line of equipment, which can answer most laser welding requirements. The Novolas WS laser system is a turnkey system designed for small batch processing and... Read more »
As medical devices become more intricate and time to market shortens, the practical limits of conventional tooling are quickly being reached. MicroFlow Medical Services utilizes innovative LaserSharp® digital converting to eliminate hard tooling, along with the costs, delays, and limitations... Read more »
By BETA LaserMike Products (NDC Technologies)
Beta LaserMike’s LaserSpeed delivers better than +0.05% accuracy when measuring the length and speed of product during production. This non-contact laser encoder uses no moving parts and is permanently calibrated, making it the ideal solution for directly replacing contact-type wheel encoders... Read more »
By Blue Thunder Technologies Inc
Latex gloves offer the perfect combination of strength, elasticity, slip resistance and comfort. Because of their significant thickness and durability, latex exam gloves perform well in high-risk, heavy-duty situations. Latex gloves are available in industrial and medical grade,... Read more »
By microPEP
microPEP is a product licensee for LC Transceiver Housings designed to fit Finisar's Advanced Components TOSA & ROSA subassemblies and provide the necessary clip feature to align and secure an LC fiber connector to all assemblies. This housing is designed for all plastic-type assemblies at both... Read more »
The world’s leading medical device companies trust Heraeus to develop and produce components and sub-assemblies for their finished product. Our experienced engineering team collaborates with every customer, bringing unmatched expertise in medical alloys, advanced thermoplastic micro-insert... Read more »
By Forward Technology Industries Inc.
For increased quality assurance of welded components, Forward Technology can incorporate leak testing into your assembly cells. Our PLC based leak testing systems employ a non-destructive test to insure the integrity of the part. Air testing detects small leaks, and eliminates the need for part... Read more »
By E D & D
Digital, easy to use full test leakage current testers for every UL, IEC, CSA and other requirements. Considered the standard in the industry. Read more »
By NextPhase Medical Devices LLC
NextPhase Medical Devices LLC, focuses exclusively on medical device contract manufacturing. We assist companies that have proven their concept and need to complete a manufacturing handshake. The design for manufacturing (DFM) process includes all aspects of long-term manufacturing support... Read more »
Marktech offers the their line of LED Chips and Materials complimented by our value added services for 100% testing of wavelength, output and packaging. The success of any optoelectronic component and assembly is predicated on the quality of the chip. Combined with Marktech's value added... Read more »
Master Bond LED401 is a highly innovative, one part LED type system that cures fully upon exposure to a 405 nm wavelength light source where the presence of any UV light is minimal or incidental. In fact, this unique system will fully cure tack-free without any oxygen inhibition. This... Read more »
LED lighting has been proven to deliver greater energy savings and distinctly better aesthetics than any other light source available. To optimize LED performance, lighting designers are utilizing high quality reflectors. Racine Metal-Fab provides lighting companies nationwide with highly... Read more »
This reflector assembly consists of complicated cone shaped corner forming. We are able to put these forms in using a special forming technique. Read more »
The LED-200 is a UV curing system powered by a Light Emitting Diode (LED) with an output of 2.5 w/cm2. This compact, hand held unit operates from a battery and is completely portable. An ergonomically positioned trigger switch allows comfortable operation while its compact size allows bonding... Read more »
By LEMO
LEMO REDEL P Self-latching plastic connectors with alignment key for medical applications. Read more »
Lenox Instrument Company’s Micro Borescope delivers a clear, bright image ideal for close-range inspection of medical devices like tubing, molded, machined and cast parts and electronic and mechanical assemblies – particularly where access is limited and the insertion point is only a few... Read more »
The Lenox Videoscope LongRange System is an easy-to-use, high-resolution, remote imaging system for long-length inspections. The Videoscope LongRange System is well-suited for examining, without removing or disassembling, pharmaceutical processing equipment, vessels, valves, heat exchangers,... Read more »
By RKS
RKS is working with the category leader in DNA sequencing to develop new technologies that will advance mankind’s knowledge and deliver better affordability for global medical clinics. Life Technologies, the leader in DNA sequencing and a key player in the future of medical science and... Read more »
Call us for any bulb for any purpose! Read more »
The IDM Light Transmission Tester provides a digital readout allowing you to quantify samples based on your in-house pass/fail criteria, and obtain consistent results while minimising your inputs. The Light Transmission Tester has been specially designed and manufactured to evaluate the light... Read more »
Integrated Magnetics designs and manufactures various types of motion control actuation devices, including linear and rotary actuators. We serve a global customer base, focusing on industrial, military, aircraft, spacecraft & defense applications that require maximum velocity and... Read more »
By TELCO INTERCONTINENTAL CORP.
Driven by ball screw, acme screw or linear motor, Telco Motion’s linear actuators meet the requirements of guidance, load and speed for precision, and are widely used in the medical applications. Our linear actuator group includes compact linear actuator, external actuator, non-captive shaft... Read more »
By SKF USA Inc.
Combining compact design with maximum speed and load capabilities, SKF MATRIX and RUNNER actuators enable a range of Trendelenburg, headrest and footrest positioning solutions. Smooth, silent operation helps ensure patient comfort and ease of operation, while very low retraction and unlimited... Read more »
Linear actuators from LINAK are high-quality actuators that promise a long lifetime and little or no maintenance. A linear actuator can be integrated into sophisticated motion control systems - providing precise position feedback and accurate control of the actuator. LINAK offers more than two... Read more »
By Humphrey Products Corporation
Humphrey Linear Actuators combine the functions of conventional air cylinders with added design and cost considerations, such as miniaturization, mounting and position sensor conveniences, and RoHS compliant materials. Products include small subminiature 4.5mm bore to robust 100mm bore. Tandem... Read more »
By Moticont
High Acceleration High Speed High Accuracy Cog Free High Repeatability Independent Multiple Coil Operation with Overlapping Trajectories No Metal-to-Metal Contact, Virtually Maintenance Free Modular Magnet Tracks Trapezoidal or Sinusoidal Commutation Increased throughput, a... Read more »
Standard and Miniature Square Rail Linear Guides from 2 mm up to 55 mm. The 2 row re-circulating miniature square rail MR series linear guide is available in sizes from 2 to 15 mm. The block and LM linear rail is made of 440c stainless steel and has several different seal options for the block... Read more »
ALIO’s linear motion products have been designed and manufactured to have no equal in terms of performance and reliability. These “mechanical” bearing stages can perform at a level of precision that alternative suppliers struggle to match with their “air” bearing stages. ALIO’s focus on 6-D... Read more »
By Moticont
The Linear Motor Actuator is used in positioning applications where high speed and high accuracy are required. The actuator may be used in the following industries; Semiconductor, Disk Drive, Automotive, Medical, Industrial, Optical, Test and Manufacturing. The Linear Motor Actuators do not... Read more »
SERAPID Lift Systems are made for high cycle, heavy duty, self-guided lifts, work platforms, and scissor lifts and are especially suited for heavy loads, long strokes and harsh environments. They are used in a number of applications, including manufacturing, theatre, military, automotive and... Read more »
By Moticont
Linear DC Motors, Voice Coil Motors (VCM) or Voice Coil Actuators (VCA) are the simplest type of electric motors. These motors consist of two separate parts; the magnetic housing and the coil. Applying a voltage across the terminals of the motor causes the motor to move to one direction.... Read more »
By Moticont
Linear DC Motors, Voice Coil Motors (VCM) or Voice Coil Actuators (VCA) are the simplest type of electric motors. These motors consist of two separate parts; the magnetic housing and the coil. Applying a voltage across the terminals of the motor causes the motor to move to one direction.... Read more »
SERAPID provides a complete line of mechanical actuators. These are suited for any load, stroke or environment. Read more »
The LINECHEK® Model 620L is a fully automated Line Leakage tester that can be configured to perform 8 of the most commonly required Line Leakage tests. The 620L has the most common measuring devices (MD's) already incorporated into the instrument and can perform patient lead tests with an... Read more »
Fully refurbished with warranty. We provide a test results report to verify that the instrument meets all relevant specifications. Agilent Models: • 1290 • 1260 • 1220 • 1200 • 1100 HPLC Detectors: • Diode Array Detector (DAD) • Variable Wavelength Detector (VWD) • Refractive Index... Read more »
For cooling high-power, high-heat flux electronic components like computer microprocessors, lasers, power electronics, military equipment, medical equipment or power electronics when air cooled heat sinks are inadequate, liquid cold plates and pumped liquid cooling systems technology from... Read more »
Our innovative liquid handling technologies are flexible and reliable. Their advanced designs will bring improved efficiency and safety to almost any life science laboratory workflow. Our extensive product line for automation is suitable for applications within the life science and diagnostic... Read more »
Smooth, creamy putties repair, rebuild and bond. Just apply and let dry. Hardening starts in just 60 minutes. Can be drilled, threaded or machined Read more »
By Silcotech North America Inc.
Silcotech enjoys a global leadership position as a provider of superior liquid silicone injection molding solutions for the medical/healthcare, automotive, packaging, consumer and consumer electronics markets for one reason: We think and act like a PARTNER - not like a supplier. Although our... Read more »
With nearly 80 years of manufacturing experience, Rogan Corporation has been and continues to be a full service global leader and pioneer within the injection molding industry. Always on the forefront of innovation and new technologies, today Rogan specializes in complex medical, close... Read more »
Plastic compartmented boxes for kit development or packaging applications. Read more »
As a leading manufacturer of high-quality tools for the turning industry, Slater Tools offers high-precision spring loaded live centers with interchangeable center shafts. Each live center has a retractable spring loaded center shaft combined with an independent inner housing, which empowers... Read more »
By Keyence Corporation of America
High-accuracy 2D Laser Displacement Sensor • Simultaneous measurements can be done at 8 points. • E3-CMOS image sensor provides stable measurements • The Quatro link system achieves the highest sampling speed in its class, 3.8 ms. • High-speed sampling of 3.8 ms, high-accuracy of... Read more »
By Keyence Corporation of America
Ultra High-Speed/High-Accuracy CMOS Laser Displacement Sensor • Fastest in the World: 392kHz • Highest Accuracy in its Class: ±0.02% • Highest Repeatability in its Class: 0.005μm • NEWLY DEVELOPED "ABLE II" CONTROL • New mid range sensor heads: LK-H008/82/87/152/157... Read more »
By Strain Measurement Devices, Inc.
SMD can manufacture a miniature load cell or micro force sensor to measure anything, even something as complex as the human eye! Our miniature and sub-miniature load cells are designed and manufactured using our proprietary thin film strain gauge process for greater stability and accuracy. Our... Read more »
Project Management assures quality and a smooth operation, including logistics, throughout the entire process – from receiving raw goods at the dock to shipping finished products to the customer. Sureway logistics personnel use all available options for domestic and international shipping. Our... Read more »
Get the thermal performance of a heat pipe — plus flexible design capabilities to ensure reliable heat removal over long distances regardless of gravity — with loop heat pipe systems. Read more »
The most important decision in any weighing application is choosing the correct industrial load cell for the job. For convenient assistance in selecting the right load cell for your requirements, contact our technical sales staff. Read more »
By Tinius Olsen
Charpy and/or Izod impact testers with capacities up to 50J of available energy. Read more »
When you want to maintain control of final product assembly in your current manufacturing location, but you need to drive cost out of the finished product, Sanbor Medical can support your effort by supplying cost effective sub-assemblies. From Printed Circuit Board Assemblies to mechanical... Read more »
By DuPont Microcircuit Materials
DuPont Electronic Inks Cure Quickly at Low Temperatures DuPont offers electronic inks that cure quickly at low temperatures, expanding the possibility of printing electronics onto an entirely new group of plastic films DuPont™ PE827 and PE828 low-temperature inks cure at as low as 60°C,... Read more »
By Peter Paul Electronics Co., Inc.
Peter Paul low watt valves are general purpose or safety valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals. Read more »
Laser plastic welding creates precisely welded seams, with minimal mechanical stress on the part, virtually no weld flash and can hermetically seal even the most complex joints. The LQ-Vario is the foundation system for LPKF Laser & Electronics’ laser welding division. Suitable for applications... Read more »
By Parker Hannifin, Precision Fluidics Div.
LQX12 is a high-performance two-way and three-way universal isolated diaphragm valve. This highly flexible design is 12mm wide and incorporates dual-elastomer options. LQX12 supports the pressure and flow requirements needed by today’s analytical, bio-analytical, and clinical diagnostic OEMs. Read more »
The Lloyd Instruments LR5KPlus advanced materials testing machine incorporates an wide range of features making it ideal for performing complex as well as routine testing applications up to 5kN (1124lbf) The standard LR5KPlus features a twin column design with a maximum crosshead travel of 975mm... Read more »
By Keyence Corporation of America
LED/CCD Optical Micrometer • High-speed linear CCD and telecentric optical system • 2400 samples/second high-speed sampling • Repeatability of ±0.06µm • Maintenance - free LED emitter and design (no laser diode or motor) • High performance controller with statistical analysis... Read more »
LSR-Silicone injection molding machines with precision molding control for flash free molding Read more »
By Keyence Corporation of America
Confocal Laser Scanning Displacement Meter • High-Accuracy Surface Scanning Method • Excellent resolution of 0.0004 Mil (0.01 µm) • Quick and easy setup functions • Multiple measurement modes for a wide range of applications Surface scanning laser displacement meter.... Read more »
By Parker Hannifin, Precision Fluidics Div.
A liquid diaphragm pump’s internal fluidic resistance is a driving factor in its performance capabilities. Liquid media has higher fluidic resistance when compared to gas or air due to it being incompressible and its much higher viscosities. These miniature liquid diaphragm pumps have an... Read more »
Since 1966 our commitment to the prevention of friction, wear and corrosion has led to a multitude of products for every industry including Aerospace, Automotive, Marine and the Medical Field. Today, we have taken that same commitment and, through extended research and development, has... Read more »
Luer fittings from 1/16 to 1/4 inch available in nylon, polypropylene, PVC, polycarbonate, radiation stable polycarbonate. Barbs, threads and luer to luer connectors available. Read more »
Instrument Quality Fittings. Molded to ANSI/HIMA MD 70.1 standards. Molded to ISO 594 standards. With or without Locking Nuts. Read more »
Nordson Medical offers designers worldwide the broadest selection of male luer and female luer fittings and connectors, luer adapters and luer accessories. Over 120 separate luer configurations are offered in nylon, polypropylene, polycarbonate and PVDF, with many color and special material... Read more »
The LumetriScan™ is a fully automated, non-contact thickness measurement gauge for long-length medical tubing and balloons up to 36 inches in length. With the data obtained from LumetriScan™ you can ensure higher-quality and more consistent product, reduce costs by identifying production defects... Read more »
By Industrial Indexing Systems Inc.
Luminary series products include single axis and multi-axis motor and drive systems functioning in torque, velocity or position control modes. Ideal for light industrial, biomedical, light material handling systems providing quiet operation. �G-code conversion routines available for programming... Read more »
MadgeTech’s Lyophilization Data Logger is designed for use in ultra-low operating temperatures for processes such as Lyophilization. The LyoTemp data logger offers a smart, affordable solution for a wide range of applications including the preparation of biological pharmaceuticals, monitoring... Read more »
The LyoTemp Data Logger is designed for use in ultra-low operating temperatures for processes such as Lyophilization. The LyoTemp has an operating range of -60 °C to +75 °C (-76 °F to +167 °F), and is designed with a hermetically sealed thermistor temperature sensing element in a long thin... Read more »
