Medical Device Directory

Products in the Medical Device Directory

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • Electronic Fuses - LITTLEFUSE, BUSSMANN, SCHURTER, MERSEN By Fuses Unlimited, Inc.

    Electronic fuses are typically rated at 300 volts or below and are designed to protect circuits in the limited space requirements of electronic equipment such as consumer electronics, computers, instrumentation, power supplies and telecommunication equipment. Miniature electronic fuses refer to... Read More
  • Exmire Syringe and Piston Pumps By Iwaki America Inc.

    •Compact size with chemically compatible materials • Ideal for analytical and lab equipment, aspiration and dispense applications Syringe-Type Stepping Pump SPV Series: 100μl / 250μl / 500μl / 1000µl High Accuracy: ± 0.3% Repeatability: 0.03% High Resolution: 6000 steps/stroke... Read More
  • Emergency Personnel Radios By MME group Inc

    Delivered: Special lens design to eliminate leakage, obtain desired clarity, and reduce cost: optimized lens shape and material, clean room molding, and use of 2-stage ionizing air. Computer modeling and machining of fixturing to ensure repeatability, precision, and long term reduction in cost.... Read More
  • Enterprise-Wide Dispensing Solutions By Fishman Corporation

    AirFree® technology allows the same fluid dispensing parameters to be set at all your facilities, across the country or around the world, and those parameters will not fluctuate. Read More
  • Earth Cell Foam By American Excelsior Company

    American Excelsior has developed an environmentally friendly polyurethane called Earth Cell that is a flexible bio-based foam and an alternative to petroleum based polyurethane foams. It is made of renewable-based bio-polyols derived from vegetables. Earth Cell is a green, earth-friendly... Read More
  • EasyPrint III By BELL-MARK

    The newest advancement in a successful series. Our NEW EasyPrint series sets new standards for packaging printing. Continuous or Intermittent mode, speed, print resolution, installation position, there are no limits. Therefore our new product line EasyPrint III is nothing other than the logical... Read More
  • EasyPrint MLP By BELL-MARK

    Multi-Lane Traversing Thermal Transfer Printer. The EasyPrint MLP is designed for versatility. The EasyPrint MLP is the ideal machine for in-line printing of batch codes, graphics, logos, sell-by dates, bar codes and other variable information. The thermal transfer technology prints directly... Read More
  • EasyStand Bantam By Altimate Medical, Inc.

    The EasyStand Bantam is new type of stander for kids! It is the only standing frame to combine sit-to-stand transition with the added function of a supine stander. By alternating a variety of positions, your child can tolerate standing for a longer period of time. Plus, when it is safer and... Read More
  • EasyStand Evolv By Altimate Medical, Inc.

    Clinical and consumer feedback over the past twenty years has led us to the design of the EasyStand Evolv, the most modular standing frame available. This sit-to-stand standing frame is available in three sizes (plus a growth kit) and over fifty options to meet the standing needs of people who... Read More
  • EasyStand Glider By Altimate Medical, Inc.

    The EasyStand Glider provides state-of-the-art Active Standing technology that can be found in no other stander. Unlike passive standers, the Glider combines lower body range of motion and upper body strengthening, while standing. To create reciprocal leg movement and range of motion in the... Read More
  • EasyStand StrapStand By Altimate Medical, Inc.

    The EasyStand StrapStand is a strap-style stander for adults from 5' to 6'5'' (152-196 cm) and up to 350 lbs (159 kg). The StrapStand can accommodate many unique needs of wheelchair users, from those with low-level spinal cord injuries to multi-user settings. The StrapStand lifts you directly... Read More
  • E-Beam Sterilization By Avantti Medi Clear

    E-Beam sterilization is based on the use of high energy electrons to shred the nucleic acids of microbial contaminants on medical devices and packaging. Commercial electricity is used to power up a linear accelerator that generates the electrons which makes multiple breaks in the DNA backbone of... Read More
  • Eclipse™ Intermittent Motion Cartoner By MGS Machine Corp

    Cartoner designed for pharmaceutical, cosmetic and personal care applications. Capable of handling a wide range of carton styles and sizes. Open access guarding. Modular product infeeds. Quick, accurate changeovers. Commissioning documentation included. The Eclipse's unique infeed offers a... Read More
  • ECLIPTA – ECL SERIES By Smiths Interconnect

    Edge Card Connectors -Eclipta Edge Card Technology -High Mating Cycle Life -PCB Connection -Plug & Play Design -Quick, Intuitive Mating Eclipta connector series addresses the medical market need for a reliable interconnect system with short lead-time and minimal cost. Eclipta easy assembly and... Read More
  • ECOM™ - Extended Capacity Outsert Module By MGS Machine Corp

    • Interfaces with the MGS TopSerter II™, SideWinder™ or certain other OEM machines • Loading trays into the finger-safe conveyance system is ergonomically friendly, safe, easy and quick • Covered or sleeved trays are not required which saves material cost. • Tool-less changeovers accomplished in... Read More
  • eDART System - Process Monitoring & Control By RJG, Inc.

    The eDART System™ helps you gain control over the two greatest variables in injection molding: People and plastic. Today's eDART lets you tailor the technology to suit your needs. But all eDART configurations have one thing in common: They provide the tools you need to go from good to... Read More
  • EDAX EDS Systems By EDAX Inc.

    EDAX offers three different EDS systems: The Element EDS System delivers powerful analytical capability in a compact package, maximizing performance and flexibility, while providing streamlined operation to guarantee fast results and ease of use. It is focused on the industrial market, where... Read More
  • EDGE COMPUTERS, GATEWAYS AND BOX PCs By Corvalent Corporation

    Corvalent’s Box PCs include our family of CorBox, CorBox+, CorBrick, and CorEdge systems. These Box PCs are innovative, x86 processor based systems, providing the best Intel microprocessor technology. The CorBox family of Industrial Embedded Systems offer a powerful, flexible, and reliable... Read More
  • EDL-4S CO2 Data Logger By Marathon Products Inc

    With the EDL-4S you can obtain Temperature, RH, CO2 and Vibration profiles in a compact low-cost 4-channel LCD data logger! Use either as a stand-alone device, or as a Wireless Data logger when connected to our separate WiFi Reader Station. This device is perfect for mapping your warehouse,... Read More
  • EDL-BT04 Humidity Logger By Marathon Products Inc

    The EDL-BT04 is a power-saving wireless temperature and RH data logger, using the latest Bluetooth 4.0 technology. This device uses a state-of-the-art Nordic N51822 chip design. Now collect temperature and RH measurement values on your Android phone and email data files anywhere in the world. Up... Read More
  • EDL-LN 2 By Marathon Products Inc

    DUAL SENSOR THERMAL DATA LOGGER —OPERATING RANGES: INTERNAL SENSOR -29°C TO +72°C & EXTERNAL PROBE -200°C TO +72°C With one sensor for ambient range temperatures inside the case, and one external probe that monitors cryogenic temperatures from -200°C (-328°F) to +72°C (+162°F) this data logger... Read More
  • EDL-Net Data Logger By Marathon Products Inc

    Use our Ethernet enabled EDL-Net data loggers to enjoy real-time temperature data collection and monitoring at anytime, from anywhere in the world over a local network or via an internet connection. Leverage your existing LAN with the built-in RJ-45 jack for CAT-5 LAN, or an Ethernet-to-WiFi... Read More
  • EDL-Wifi Data Logger By Marathon Products Inc

    Use our WiFi-enabled EDL-WiFi data loggers to enjoy real-time temperature data collection and monitoring at anytime, from anywhere in the world over a local network or via an internet connection. Leverage your existing WiFi network with the built-in WiFi b/g/n connectivity to avoid expensive... Read More
  • EDM Hole Drilling By American Wire EDM

    American Wire EDM, Inc., offers EDM hole drilling services to meet the needs of any application or industry. Using state-of-the-art, CNC-operated EDM machinery, we can provide hole drilling as small as 0.005” in diameter as part of your product’s design or as pilot holes for wire EDM processing.... Read More
  • EDM Medical Component Manufacturing By American Wire EDM

    Because they can sometimes mean the difference between life and death, parts and components for the medical industry require the highest levels of quality and accuracy. American Wire EDM, Inc. has the capabilities to meet these high standards, providing precision wire EDM machining and EDM hole... Read More
  • EDM Services By Xact Wire EDM Corp.

    Precision wire electrical discharge machining services (EDM) and small hole EDM machining services from Xact Wire EDM Corp. include: production (medical, surgical and dental device production and prototyping); die components; mold details and electrodes; high precision, small wire diameters; 30+... Read More
  • EFI Alloy 79 Soft Magnetic Alloy By Ed Fagan Inc.

    EFI Alloy 79 Soft Magnetic Alloy, also known as Magnifer 7904, Carpenter HyMu 80, Hipernom, Moly-Permalloy, and Permalloy 80, is a soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron. Alloy 79 is used where extremely high initial & maximum permeability and minimum... Read More
  • EKOHEAT 50kW Systems By Ambrell Induction Heating Solutions

    EKOHEAT 15kW induction heating systems, available from 1.5-45 kHz, provide reliable and repeatable solutions for heating larger parts. Among the many typical applications are heat treating of steels, preheating for forging of steel, aluminum, copper or brass, crystal growing, and heating of... Read More
  • Elastacon 3300 Series TPE By Elastocon TPE Technologies

    Elastocon 3300 TPE series is a colorable S-B-S thermoplastic elastomer series. Benefits of our Elastocon 3300 Series of TPEs include: • Can be injection molded, extruded, blow molded or compounded • No drying required • Less material usage during processing • High flow properties to enable... Read More
  • Elastocon 2800 Series Performance TPEs By Elastocon TPE Technologies

    Our popular Elastocon 2800 Series of thermoplastic elastomers are offered in Shore A hardness ranges from 10 to 90, ideally suited for your applications requiring an ultra-soft rubber-like feel and a good surface finish with non-slip/soft touch ergonomics and resilience. Our 2800 Series... Read More
  • Elastocon 8000 Series General Purpose TPEs By Elastocon TPE Technologies

    Our versatile Elastocon 8000 TPE Series of thermoplastic elastomers are supplied for compounding or as ready-to-use pellets in 1000 lb. quantities. Benefits of our Elastocon 8000 Series of TPEs include: • Can be injection molded, extruded, blow molded or compounded • Less material usage during... Read More
  • Elastocon 9000 TPE Series By Elastocon TPE Technologies

    Our Elastocon 9000 TPE Series of D scale thermoplastic elastomers are supplied for compounding or as ready-to-use pellets in 1000 lb. quantities. Benefits of our Elastocon 9000 Series of TPEs include: • Higher durometer D scale hardness thermoplastic elastomers • Can be injection molded,... Read More
  • Elastocon CLR Series Transparent High Strength TPEs By Elastocon TPE Technologies

    Our new Elastocon CLR (Clear) Series of non-blooming thermoplastic elastomers were developed for applications that clarity and high strength properties. The new grades are FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Read More
  • Elastocon OF (oil-free) TPE Series By Elastocon TPE Technologies

    Our new Elastocon OF (oil-free) TPE Series of thermoplastic elastomers were developed for applications that require oil/plasticizer-free, high strength properties and a reduced coefficient of friction. These thermoplastic elastomer grades are well suited for consumer goods and industrial... Read More
  • Elastocon STK Series Overmolding TPEs By Elastocon TPE Technologies

    The Elastocon STK Series of thermoplastic elastomers are offered in a variety of Shore A hardness ranges, ideally suited for applications that require overmold adhesion to various substrates like PC, ABS, PC/ABS, Copolyester, and Polyamide. Best applications are for consumer goods and industrial... Read More
  • Electric Hot Water Boilers By Sussman Electric Boilers

    Sussman SVW Hot Water Boilers are engineered to perform as an effective energy managemnet program for hot water heating systems and offer these excellent benefits: • Reduced Installation Costs • No Fuel Delivery/Storage • Low Maintenance • Years of Trouble-Free Operation • Factory Tested, Ready... Read More
  • Electric Linear Actuators By LINAK US, Inc.

    LINAK® electric linear actuators provide a safe, quiet and clean movement with accurate motion control. They are energy efficient and have a long lifetime with little or no maintenance. LINAK® electric linear actuators consist of a motor, a gear and a spindle, including a nut. A special version... Read More
  • Electric Steam Generator By Sussman Electric Boilers

    Small size, small capacity Sussman MBA Electric Steam Generators are perfect for industries that require efficient, high quality steam in laboratories, hospitals, computer rooms, pilot plants and for small intermittent, low-steam consuming loads. These generators are perfect for standby... Read More
  • Electrical and Electronic Nickel By Ed Fagan Inc.

    Ed Fagan Inc. has a large inventory of Electrical/Electronic Nickel commercially pure nickel which contains only traces of minor elements. Available in several grades, pure nickel has good mechanical properties and excellent resistance to many corrosive environments. Other features include high... Read More
  • Electrically Conductive Products By Master Bond, Inc.

    Master Bond Inc. offers a broad line of electrically conductive adhesives, sealants and coatings which are widely used in the electronic and electrical industries. They are formulated with metal powders and flakes such as silver, nickel, copper and silver-coated nickel, with silver formulations... Read More
  • Electro-Cure-4001 UV Flood System By Electro-Lite Corp.

    The ELC-4001 flood curing system generates greater than 125 mW/cm2 of UV energy at peak wavelengths of 290nm, 365nm and 420nm. Its versatile modular design answers industries needs for increased productivity, lower energy costs and an end to pollution emissions. Whether housed in the optional... Read More
  • Electro-Cure-500 By Electro-Lite Corp.

    The EC-500 is a completely contained, operator safe, light exposure system, powered by four 350nm, 290nm or black light lamps @ 30 mW/cm2. The EC-500 features a digital countdown programmable timer, power down mode, safety interrupt chamber switch, and an audible end signal. The system also... Read More
  • Electroform Nickel Tooling Services By FET Engineering, Inc.

    At FET Engineering we provide design, engineering, and CAD modeling of custom electroform nickel molds for a range of applications and industries. Designs are thoroughly analyzed with stress analysis technology, and models are created for further evaluation and refinement in order to meet... Read More
  • Electromagnetic Compatibility EMC Compliance Testing Services By TÜV SÜD America Inc.

    TÜV SÜD Product Service is the world's largest independent Electromagnetic Compatibility (EMC) testing and certification organization. TÜV provides numerous EMC compliance testing capabilities for all regions of the world including North America, Europe, Asia, and Australia. TÜV SÜD America's... Read More
  • Electro-Medical Devices By Fralock

    For many decades, Fralock has designed and manufactured Electro-Medical assemblies for durable medical equipment, implantable devices, single-use disposable technologies and Life Sciences markets. Our advanced die-cut components for electro medical assemblies function as electrical insulators,... Read More
  • Electronic Assemblies for Medical Devices By Concept 2 Market Inc.

    C2M provides one-on-one detailed services for all of its customers' electronic assembly needs. As a current supplier to the medical industry, C2M has experience meeting the crucial needs that a typical medical device manufacturer is looking for in a contract manufacturer. C2M is capable of... Read More
  • Electronic components By A.E.D. Inc.

    All board level electronic components, such as ICs, connectors, capacitors, resistors, etc. and peripherals such as hard-drives and LCD displays. Read More
  • Electronic Power Components By Electrocube, Inc.

    Electrocube is a capacitor manufacturer known for its capacitor designs with thousands of precision-wrap and fill, oval/round/flat and epoxy case/hermetically-sealed capacitors. Read More
  • Electronics and Software By Omnica Corporation

    Most of the medical devices we develop require electronic engineering and software development capabilities on some level. Our experienced four-person team can handle electronics and software challenges from conventional designs to highly sophisticated, fully integrated systems. We have the... Read More
  • Electronics and Software By Sunrise Labs

    With deep expertise in both electronics and software the Sunrise team is able to quickly evaluate many and varied approaches to solving your design challenge and select the approach that best fits your product and project goals. Trade-offs between product cost, time to market, and project cost... Read More
  • Electronics Packaging By T.O. Plastics Inc.

    When it comes to electronics packaging, we have unparalleled experience in design, research and development, production and quality control. We routinely run many static dissipative and conductive materials that are crucial in electronics component packaging applications. •Cleanroom production,... Read More
  • Electronics Quality Assurance By Braun Electronic Components, LLC

    Braun can help with shortage, obsolete or hard to find board level components, such as processors, memory modules and chips, capacitors, resistors, connectors and other electrical and electromechanical components. We take pride in solving our clients real problems with creative and innovative... Read More
  • Electro-Static Generators & Charging Bars By TAKK Industries Inc., Static Control Div.

    TAKK Electro-Static Generators and Generator Bars offer a low cost method of temporary adhesion and pinning—effective, simple, clean and non-marking—through the bonding force of positive and negative ions (static electricity). The Generator/Bar System enables you to bond similar or dissimilar... Read More
  • ELIX ABS By ELIX Polymers, S.L.

    Extensive portfolio of ABS thermoplastic resins,focused on specialty products and markets with high added value. Read More
  • ELIX PC / ABS By ELIX Polymers, S.L.

    Blends of PC and ABS for general injection molding applications with excellent balance flowability and mechanical properties. Read More

    Portfolio of ABS and SAN based modifiers to improve impact and flowability of ABS, ABS blends and other thermoplastics. Read More
  • Embedded Display Modules By DigiZap Solutions LLC

    Haidar's Embedded Touch Screen Display modules are Production ready and Fully integrated Embedded TFT display modules. Haidar's display modules are drop-in solution that allow customers to implement Graphical User Interface with Smart Phones-like graphics and feel at record time to market.... Read More
  • EMC Testing By Tuv Sud

    Advanced Compliance Solutions delivers EMC Compliance Testing capabilities to meet many requirements. ACS is a NVLAP-Accredited ISO17025 Testing laboratory that specializes in EMC Compliance Testing and other product regulatory testing. Read More
  • EMC Testing By F2 Labs

    F2 Labs can perform Electromagnetic Compatibility (EMC/EMI) testing of your product at our facility or on-site at your facility. With decades of experience, our expert engineers can assist you with all of your EMC testing and trouble-shooting needs. We can assist you in achieving certification... Read More
  • EMC Testing By Intertek

    With the largest global network of 23 EMC testing labs, Intertek provides the capacity, proximity and engineering resources to streamline your EMC compliance testing process for any market you want to reach. We hold a long list of EMC accreditations from around the world. Our queue times are as... Read More
  • EMC Testing By Keystone Compliance, LLC

    Keystone Compliance is a unique EMC test facility because of our focus on assisting our customers achieve the measurements and certifications that they are seeking. Our lab features three 3-meter EMC chambers and two military/aerospace EMC chambers. In addition to the chambers, the lab... Read More
  • EMC/EMI Testing By Element

    Element is the solution to satisfy your compliance needs throughout the development cycle of your Class I, II, and III electronic medical devices.Our medical regulatory affairs experts work with manufacturers of electrical medical devices to identify the appropriate testing standards for your... Read More
  • Emergency Services By EAG Laboratories

    When unforeseen quality issues occur, Chemir can help. Our analytical investigations provide quick and reliable answers needed to manage a crisis. Our scientists are available 24/7 to solve complex, non-routine problems using a customized approach. Chemir has a solid reputation for... Read More
  • EMI / EMC Testing By Qualtest

    The Qualtest EMI Test Facility has expanded from 4,100 to 8,400 square feet! Two shielded EMI Test Enclosures were also added along with more equipment and test personnel to support the increased demand for this important area of testing. In addition, test capability was expanded to include... Read More
  • EMI Filters By LCR Electronics, Inc.

    LCR Electronics now offers two new series of EMI Filters for MRI (magnetic resonance imaging) shielded rooms. The 058 series filters are designed to mitigate any unwanted EMI noise through MRI room telephone, alarm and data lines. The UL-recognized 059 series filters provide EMI suppression... Read More
  • EMI Shielding By Parker Chomerics

    Parker Chomerics EMI shielding products family includes an extensive selection of EMI gaskets; shielded windows; shielded air ventilation panels; cable shielding products; grounding solutions; shielding laminates; tapes; conductive coatings, adhesives, sealants, grease and inks; conductive,... Read More
  • EMI shielding conductive adhesive tape By Jinan EMI Shielding Technology Company, Ltd.

    conductive fabric adhesive tape, aluminium foil tape,copper foil tape, could cut or die cut by cusotmer design Read More
  • EMI shielding gasket By Jinan EMI Shielding Technology Company, Ltd.

    fabric over foam gasket, beryllium copper gasket, conductive silicon gasket Read More
  • EMI Shielding Plastic Compounds By RTP Company

    Thermoplastic compounds for EMI/RFI shielding offer reliability and value in applications where electromagnetic compatibility is required. These specialty compounds give designers and processors tremendous flexibility and offer significant benefits over metals, unfilled resins, or coatings.... Read More
  • EMI Shielding Tapes By Parker Chomerics

    Chomerics CHO-FOIL and CHO-FAB EMI shielding tapes are offered in multiple widths and several materials including: copper; embossed copper; aluminum; tinned-copper; and nickel-plated fabric. CHO-MASK II tinned-copper tape with peel-off polyester mask is supplied for applications where one wishes... Read More
  • EMI Shielding: Electronic Shielding By FABRI-TECH COMPONENTS, Inc.

    Services Electromagnetic interference (EMI) can cause any number of problems in electronic equipment, even in the most advanced models. It can also cause injury to people who use electronic devices. To protect products and consumers from EMI, you need to work with an experienced electrical... Read More
  • EMI/RFI Shielding Coatings By TST Engineered Coating Solutions

    Electromagnetic interference (EMI) and radio frequency interference (RFI) can be mitigated with the use of thermal spray coatings. Attenuation levels of about 80 dBm can be acheived at frequencies into the gigahertz range. The coatings can be applied to a many materials including plastics and... Read More
  • EMP Mini-Hybrid Thermal System By Engineered Machined Products Inc

    EMP is the innovative leader in improving fuel economy, reducing emissions, improving safety and enabling cost-effective rebuild/retrofit on Municipal Transit Bus Fleets with a Mini-Hybrid Thermal Management System. EMP's Mini-Hybrid Thermal System is a revolutionary advanced thermal management... Read More
  • EMS Patient monitor By Drugdu Technology Co., Ltd

    N3-EMS Monitor professional design with heat protection 40℃, shock resistance 2m and waterproof(IPX4) Guarantees application in servere environment Build-in 112mm thermal printer for multiple parameter record masimo SPO2 and Suntech NIBP as stand Read More
  • EMS200 Desktop Workstation By TYKMA Electrox

    A fully featured, desktop laser marking system which includes; Full CDRH Class 1 certification, an automatic access door, programmable focusing axis and interior work light. Read More
  • Encapsulation and Overmolding By RIMNETICS Inc

    Encapsulation and overmolding with Rimnetics utilizes the low exothermic heat and process pressure produced by the RIM process to encapsulate even the most sensitive circuit boards, antennas and batteries while the low viscosity of the material ensures that even the most detailed geometries are... Read More
  • Enclosures By Rittal Corporation

    Rittal’s enclosure products include junction boxes, metal and fiberglass wallmount and freestanding enclosures, network server enclosures (available with hardware racks), plus, special solutions for hazardous location or outdoor deployments, EMC/interference protection, and purgeable uses.... Read More
  • Encoders By Buehler Motor, Inc.

    With optical or magnetic encoders and a choice of brakes, Buehler Motor offers custom-fit solutions for a wide range of applications in the medical equipment and healthcare sectors. The mini-rotary encoders offer perfect motion control in the tightest space. With optical and magnetic encoders... Read More
  • Endoscopic LED Handheld Light Source By Acera LLC

    The Acera Handheld Light Source (HLS) is extremely bright and upgrades your flexible or rigid endoscope to a truly portable and mobile tool. Untethered by a light guide cable from a tabletop light source, you will be able to move freely without sacrificing intensity or color. Acera has combined... Read More
  • energy chain® cable carriers By igus Inc.

    energy chain® cable carriers are the umbilical cord of modern machines. They minimize downtime, protect, support and extend the service life of cables and hoses. From the smallest ‘micro’ energy chain® to the world's largest polymer energy chain®, igus® cable carriers are capable of long and... Read More
  • Energy Efficiency Testing By Tuv Sud

    We at ACS believe that the solution to pollution and greenhouse gas emissions is through technology innovation. We want to support these efforts as much as possible. In honor of Earth Day 2007, ACS has announced the “ECOmpliance” initiative. This initiative consists of three elements.... Read More
  • Engineered and Industry Solutions By Omron Automation Americas

    Engineered Solutions In addition to our extensive array of configurable standard products, Microscan designs and develops high quality custom engineered solutions to meet specific customer and industry needs. Our Auto ID and Machine Vision experts can pair our products with customized... Read More
  • Engineered Fans & Motors By Epec Engineered Technologies

    EC Fans & Drives, a division of Epec Engineered Technologies, specializing in the design and manufacture of Electronically Commutated Motors and Fans to Original Equipment Manufacturers. With sales offices and production facilities strategically located in China, the United Kingdom and the... Read More
  • Engineered Hot Air Industrial Dryers & Ovens By Glenro, Inc.

    Increased performance can be expected from Glenro engineered hot air system designs. Glenro designs are innovative and cost effective. Combined with our expertise in the integration of multiple energy sources, your investment in our creativity will result in a very attractive return of increased... Read More
  • Engineered Polymers Formulations By Avient Corporation Specialty Inks

    With a significant portfolio of high-performance and specialty-engineered materials, Avient offers the broadest range of solutions, capabilities and resources designed to make your products better. Working with virtually any thermoplastic base resin, we offer a complete line of existing... Read More
  • Engineered Services By Motion Solutions

    CLEAN-SHEET DESIGN We use a mature development process based on: - Mechatronic design, integrating mechanical and electrical engineering from the start - Solid Works 3-D CAD for structural design - Finite element analysis (FEA) for design review - Multiple prototyping cycles - Operational... Read More
  • Engineered Thermoplastics By Parker Chomerics

    The use of highly engineered resins and its resulting “Metal Replacement Technology” requires technical familiarity with both plastics and metals technologies. Parker Chomerics engineers are experienced with the requirements needed when designing a part for metal replacement. We can assist in... Read More
  • Engineering By The QC Group, Inc.

    QC specializes in the reverse engineering of complex precision tooling and product geometries to support precision tooling. We capture an artifact’s precise dimensional data—whether microscopic or large; whether new or vintage products. Then we produce CAD models that are an accurate... Read More
  • Engineering By MME group Inc

    Our in-house engineers provide full service product development services. We also partner with your engineering team to complete your design, and execute qualification and validation. Our technical expertise and skill allow us to work from a napkin sketch or a 3D model to take your product from... Read More
  • Engineering and Design Services By KMC Systems Inc.

    Partner with KMC Systems to Add Medical Engineering and Design Expertise to Your Team. KMC Systems has been solving complex medical engineering and design challenges since 1980. Leading instrument companies partner with KMC to leverage our proven expertise in conceiving innovative,... Read More
  • Engineering Models By Forecast 3D

    When it comes to producing quick engineering studies, we have several choices for you to pick from. One of the fastest paths to this is to build an SLA pattern and choose our Level 1 Engineering Finish and First Available option. This will get your project queued into the next available build in... Read More
  • Engineering Services By Paragon Innovations

    Product Development services. This includes electronics, software/firmware, and mechanical design services for new product development. Read More
  • Engineering Services-Electronics By Pentad Design

    Pentad Design offers a wide variety of electronic development and design services. Our engineering team has many years of experience in embedded digital, analog, and wireless design. We can bring your product idea or circuit challenge to realization quickly and effectively. We specialize in... Read More
  • Engineering Services-Mechanical By Pentad Design

    Pentad Design provides product development and electromechanical packaging services. Services include the design of complex ruggedized military equipment, commercial avionics and telecommunications equipment. All of our core staff has had the advantage of working at the "cutting edge" of the... Read More
  • Engineering Services-PCB By Pentad Design

    Pentad Design provides printed circuit board engineering for all types of industries– medical, aerospace, communications, industrial and commercial. Our engineers have many years of experience in high speed, high density, digital and analog circuit design. We can provide you with the PCB... Read More
  • Engineering Services-Regulatory/Safety By Pentad Design

    Medical Device Our engineers have many years of experience developing successful medical devices in conformance with the evolving worldwide medical device regulations. Pentad can help from the initial specifications through to engineering design and development, prototype verification,... Read More
  • Engineering Services-Software By Pentad Design

    Pentad Design develops creative embedded software solutions for clients in the medical, aerospace, industrial, and consumer electronics industries. Our engineers have many years of experience and our hardware and software teams collaborate early in the development process to create an integrated... Read More
  • ensur By DocXellent, Inc.

    Whether your business is large or small, ensur is the software solution to the regulatory and compliance needs of your business documents. ensur is a web-based electronic document management software application that enables you to manage your various business processes. Once validated wtihin... Read More
  • EnviroAlert® By Winland Electronics Inc.

    Critical Environment Monitoring Winland EnviroAlert ® solutions simultaneously monitor temperature, humidity, and/or water presence in critical environments. Designed for customization, they work for any company or job site. You’ll receive instant notification of arising issues and enjoy peace... Read More
  • Environmental Test Chambers By Cincinnati Sub-Zero

    CSZ offers a large selection of test chambers with quality construction and innovative technology, serving a variety of industries. Temperatures range as low as -80°C with high temperatures to +350°C and humidity ranges from 10% to 98% RH. Test chamber sizes range from small benchtop chambers... Read More
  • Environmental Testing By Tuv Sud

    Advanced Compliance Solutions delivers a wide range of environmental testing services to meet your specific requirements. We have the resources and capabilities to help you hit the environmental testing benchmarks that you must attain. ACS’s Environmental Simulation Laboratory is used to... Read More
  • EO Sterilization By Blue Line Sterilization Services

    EO sterilization with as little as 8 hours of queue and handling time added to your cycle before your product is ready to be returned. Our chamber is 8 cu ft, suitable for prototypes, design verification and validation lots, and clinical study units. Read More
  • EPIC Medtec™ Centers By Teleflex Medical OEM

    You have a great idea for a medical device. You know what the device needs to do. But your R&D resources are involved with other projects; or you may need insight or unbiased opinion of a device’s design for manufacturability. Teleflex Medical OEM has you covered with our comprehensive... Read More
  • Epicor ERP By Epicor Software Corporation

    Epicor enterprise resource planning (ERP) software systems (previously Vista and Vantage) automate and optimize business operations by integrating all or the majority of the data and processes of a manufacturing or distribution organization into a single unified solution which maximizes profits... Read More
  • e-Press By Sonics & Materials, Inc.

    Sonics’ 20 and 40 kHz e-PressTM ultrasonic plastics assembly systems feature a stepper motor drive with optical linear encoder that provides superior precision control with a weld depth tolerance of +/-0.0003 inches (0.008 millimeters)for repeatable welds to precise final dimensions. Electric... Read More
  • ePTFE Membrane By Phillips Scientific Inc

    ePTFE membrane offers superior performance compared to most other plastics with regard to chemical & bio inertness, temperature range, UV resistance, electrical and heat insulation properties. Applications can range from filtration to medical to apparel. Phillips can produce very thin membrane... Read More
  • ePTFE Thin Wall Tubing By Phillips Scientific Inc

    PTFE thin-wall tubes produced by Phillips find application in medical, filtration and chemical processing. Because of the unique design and production techniques, Phillips’ thin-wall tubing is able to achieve high tensile strengths and a low shrinkage factor. Many of the physical... Read More
  • ERAFLASH by eralytics for CANNON By Cannon Instrument Company

    ASTM D6450, ASTM D7094 ERAFLASH is preconfigured for the automatic measurement in full compliance with the latest and safest Continuously Closed Cup Flash Point (CCCFP) standards ASTM D6450 and ASTM D7094 and in excellent correlation with ASTM D93, ASTM D56, ASTM D3828 ISO 2719, ISO 13736, EN... Read More
  • ESP4 Moment compensated load cell By Load Cell Central

    The LCC-ESP4 load cell is designed for electronic bench and platform scales, medical scales, and any application where a low profile load cell design is a must. Low in cost and suitable for a wide variety of OEM and force measurement applications, the LCC-ESP4 load cell is readily available in... Read More
  • ESQ Enclosures from Emcor Enclosures/Crenlo By Emcor Enclosures - Crenlo

    The Emcor ESQ enclosure product line from Crenlo is ideal for applications requiring a high-quality, economical means for housing electronic equipment and a clean, contemporary appearance. Best-suited for broadcast, test and measurement and security applications, the ESQ features a fully welded... Read More
  • Etched Leadframes By Photofabrication Engineering

    PEI is now offering a complete line of photochemically etched lead frames for integrated circuit manufacturing. These lead frames are used in a wide range of applications including semiconductors, glass-to-metal seals, relays, and medical applications such as hearing aids. Using base materials... Read More
  • Etched Lids & Covers By Photofabrication Engineering

    For almost half of the company's history, PEI has dedicated an entire department to the daily etching of lids for seam weldable microelectronic packages. PEI's Lid Division currently provides lids and covers to the microwave/aerospace, hybrid/ OEM and related industries. We can produce lids (... Read More
  • Etched Metal Fuel Cell Plates By Photofabrication Engineering

    PEI can photo chemically etch flow field bi-polar plates used in proton exchange membrane fuel cells. Fuel cell separator plates are conductive plates within a fuel cell stack that act as an anode for one fuel cell while acting as a cathode for adjacent cells. Fuel cell separator plates contain... Read More
  • ETFE Tubing By Fluorotherm Polymers Inc

    ETFE is a fluoropolymer that is chemically and structurally similar to polyolefins such as polyethylene, thus providing a higher abrasion, impact, and crush resistance than its fully fluorinated (perfluoropolymer) counterparts -PTFE, FEP, and PFA. Read More
  • Ethylene Oxide Sterilization By STERIS Corporation

    Ethylene oxide (EO or EtO) is a simple chemical compound that is commonly used for gaseous sterilization of disposable healthcare products. A wide variety of materials and components commonly used in the manufacture of these products may be sterilized with ethylene oxide in their final... Read More
  • EtO Sterilization Data Loggers By MadgeTech Inc

    MadgeTech’s Ethylene Oxide (EtO) sterilization data loggers can be used to monitor, record and validate sterilization cycles. These rugged devices are capable of withstanding temperatures up to 80°C, and are available in a temperature or temperature and humidity model. The EtO sterilization data... Read More
  • ETQ Quality and Safety Software for Medical Device Companies By ETQ

    ETQ Reliance 2019 is a SaaS Quality Management System that provides industry-leading ease of use and powerful flexibility, while delivering best practices from the strongest, most quality-centric companies in the world. ETQ SaaS offers customers a fully managed quality software solution that... Read More
  • ETQ Reliance By ETQ

    ETQ Reliance 2019 is the most powerful, flexible and easy to use QMS solution available on the market. For customers in industries such as medical devices, life sciences, heavy industrials, food and beverage, electronics, chemicals, aerospace and defense, automotive and commercial aviation-life... Read More
  • Evana Healthcare / Medical Device Solutions By Preh IMA Automation

    Custom Medical Device Automation Equipment for Healthcare Products Companies Evana designs, builds and integrates innovative automated assembly and testing systems for healthcare manufacturers and medical device companies. We provide scalable manufacturing solutions for the toughest... Read More
  • EverSwitch Switches By Barantec Inc.

    EverSwitch switches are designed with no moving parts, thus making them survive in the harshest environments. Numerous designs are available such as; standard housing, single LED, ring illuminated, as well as numerous custom designs. Typical applications include... security-access control,... Read More
  • EvoControl® Microfiber Wipes By Vileda Professional

    • Unique, patented, microfiber structure provide revolutionary cleaning results that meet strict contamination control demands • Remove contaminants in one swipe, leaving the surface clean and free of residual contamination • 99.999% proven bacteria removal • 9”x 9” and 12” x 12” sizes available Read More
  • Exam Glove, Medgluv Latex Powder-Free By Medgluv Inc.

    Textured finish provides excellent grip in both wet and dry situation. Medgluv quality powder-free exam gloves are manufactured with less than 50 micrograms total water extractable protein. These high-quality powder-free latex gloves are an excellent choice for virtually every application in a... Read More
  • Exam Glove, NeuSkin Ultra Stretch Vinyl Powder-Free By Medgluv Inc.

    Synthetic Powder Free Exam Gloves are made of a special PVC blend that looks and feels like latex gloves. With an exceptional snug fit and stretchability, they are less baggy than regular vinyl gloves and provide superior tactile-sensitivity Read More
  • Exam Glove, Sensigluv Latex Powder-Free By Medgluv Inc.

    Sensigluv Premium Powder-Free exam gloves are manufactured with less than 50 micrograms total water extractable protein. These high-quality powder-free latex gloves are an excellent choice for virtually every application in a health care environment Read More
  • Exam Gloves, NitriSkin Nitrile Powder-Free By Medgluv Inc.

    The NitriSkin Blue glove is a high-performing, latex-free exam glove for use in every application in a healthcare environment. Exceptionally stretchy soft, low modulus nitrile synthetic compound is very comfortable for extended periods.Approved for use with Chemotherapy drugs* Read More
  • Exam Gloves, NitriSkin XP, 12" 8 mil Chemo Glove By Medgluv Inc.

    When a high risk situation requires the highest standard in protection. These nitrile synthetic gloves provides extra protection and typically used for tasks involving prolonged exposure to blood, body fluids, chemotherapeutic agents, surgical instrument cleaning solutions and other chemicals.... Read More
  • ExciStar XS By Coherent (Deutschland) GmbH

    The intention of the development of the excimer laser series ExciStar XS was to design a compact excimer laser with lowest investment costs, but also with superior performance, which can be used even in industrial applications. These requirements led to an excimer laser with extremely compact... Read More
  • EXERGEN TemporalScanner™ TAT- 2000C By Exergen Corp.

    The TemporalScanner Thermometer is a totally non-invasive system with advanced infrared technology providing maximum ease of use with quick, consistently accurate measurements. Advanced, patented technology measures temperatures with a gentle stroke across the forehead. The TemporalScanner... Read More
  • EXERGEN TemporalScanner™ TAT-2000 By Exergen Corp.

    The TAT-2000 is a light-duty professional model intended for school nurses, nursing homes, and other occasional use clinical settings. It allows the choice of using disposable covers (caps #134203 or full sheath #129462), or cleaning between patients with a disinfectant wipe. The TAT-2000 is... Read More
  • Expanded content 2-ply label By Topflight Corp.

    New expanded content design features a printed adhesive which provides more design options for our two-ply labels. Read More
  • Expert Development Assistance By GlobalMed Engineering

    GlobalMed Engineering is a full service product development company that is committed to developing innovative solutions for the medical device community. We combine creative and technical expertise to develop products from concept through the product development and production processes and... Read More
  • Expert Witness Services By Massachusetts Materials Research, Inc.

    We provide our professional assistance, including Expert Testimony, in cases involving product liability, property damage, and other damage or injury claims. We are an independent laboratory that will provide an objective and impartial analysis along with a comprehensive report of our findings... Read More
  • Exposure Monitoring Badges By Baygen

    FOR OCCUPATIONAL EXPOSURE For workplace exposure, the ACS monitoring badges meet OSHA requirements for exposure times from 15 minutes to more than 8 hours. The analysis is done in an AIHA accredited laboratory. •Convenient All-inclusive price for Badge, Analysis, and Report. •Reliable Meets... Read More
  • Extension Lines By Qosina Corp.

    Qosina offers single-use medical device extension lines in a variety of styles, materials, and connections. Extension line styles are available in coiled, insert molded, and bonded. Qosina also offers extension lines with a bonded polycarbonate female luer lock inlet and either a rotating or... Read More
  • External Pacemaker By MME group Inc

    Delivered: Turnkey assembly solution: engineering, assembly, qualification/validation. Complete qualification and validation of patient life critical components: battery compartment and slide tray. FDA approval documentation support. Read More
  • External Rotary Broaches By Slater Tools Inc.

    Slater Tools Inc. offers the largest variety of internal and external rotary broaches, also known as wobble broaches. Fast delivery is guaranteed on all polygon forms, with standard square and hex broaches available from stock. Custom cut lengths and overall lengths, including 28mm, are... Read More
  • Extruded Products By G-M-I, Inc.

    Extruded Products are extruded rubber gaskets and other parts using ASTM, FDA, NSF, 3-A Sanitary, RMA, USDA and USP Class VI approved ingredients and/or materials, specifications and standards thereof as well as other Non- Metallic materials for various standard and customer specific applications. Read More
  • Extruded Thermoplastic Medical Device Tubing By Trajan

    EPIC Extrusion is ISO 9001:2008 certified and a leading supplier of extruded thermoplastic tubing. EPIC specializes in small diameter, thin-walled tubing for medical device companies and related applications and processes (including IV apparatuses, blood delivery systems, catheters, medical and... Read More
  • Extrusion Services By Custom Plastics, Inc.

    Profile Extrusion | Co-Extrusion | Compounding We deploy a variety of different extruders which enable a wide array of capabilities. Specializing in dual material profile extrusion which can significantly reduce assembly costs while enhancing performance and function. We are highly proficient... Read More
  • Extrusion Tooling - Three-Layer Technology By Guill Tool & Engineering Co., Inc.

    New Guill extrusion three-layer technology accelerates drip-irrigation performance - controls precision water and fertilizer use and protects the environment. The head/die engineering utilizes a spiral flow that handles three layers. Prior to this advancement, only two layers were common. One of... Read More
  • E-Z Bonder Solvent Dispenser - Lakeview Equipment By Lakeview Equipment Inc

    E-Z Bonder Solvent Dispenser makes medical tube or fitting bonding quick and easy. It helps reduce undesirable solvent fumes from production area. Read More
  • EZY™ Caps By EPSI

    Our EZY™ Cap product line is the best choice when masking off threaded studs or protrusions. Many EZY™ Caps are molded with an air vent which acts as a relief valve for applications where internal pressure is a problem. All EZY™ Caps feature an oversized head and a unique internal gripping... Read More