Circuit breakers are a current sensing electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow. Unlike a fuse, which operates once and then must be replaced, a... Read More
Delivered: MME discovered that design was not complete and customer was having sourcing challenges. Customer relied on MME’s full range of capabilities in DFMA, assembly, injection molding and sourcing.Took control of design and timeline; finding solutions to sourcing metal tubing and all... Read More
Cottony™ II suture features a tight, uniform Deknatel® braid that provides resistance to breaking and kink-free suture delivery. Characteristics include Cottony™ II exhibits easy handling and secure knot tying. A “mechanical softening” process makes this suture feel as soft and smooth as... Read More
The Cadex C7000 Series battery analyzers are for the professional testing of in-service portable batteries used in hospital medical equipment, two-way radios, cell phones, mobile computing, portable scanners and data devices or unique applications such as military systems. The analyzers work... Read More
Save time and money. Positronic can provide cable assemblies to your specifications.
We work closely with customers to:
• Design assemblies in accordance with customer requirements.
• Prepare cablized connector configurations and performance specifications.
• Design each system in accordance... Read More
Our CrimpFlex™ jumper cables are dedicated to connections from board to board in 2 market standard pitches, 1.27mm and 2.54mm.
Our jumpers allow a better retention compared to FFCs used with ZIF/LIF connectors thanks to the largest choice of contacts and housings available on the market.
The... Read More
Northwire’s Endurance connectors provide high durability and reliable connectivity through internal shielding. When combined with Northwire’s exclusive wire and cable, these rugged connectors are proven to exceed 10 million flex cycles. Screw-lock connectors utilize combination Phillips/slot... Read More
We take a tremendous amount of pride in our engineering approach of being able to optimize designs to create innovative, high quality products while removing cost. We do this by adhering to a disciplined approach of problem solving and the integration of best practice in:
Component Procurement... Read More
The Cadex C8000 Series Battery Testing System is a high-performance battery-testing device designed specifically for battery research, product test laboratories, manufacturing and experimental testing.
Four independent battery service channels with 4-wire battery test cables
Programmable... Read More
Calendered Sheet Products are GMI’s Calendered Sheet Roll Goods manufactured to the highest quality standards from NBRs (Buna-N/Nitrile), EPDMs, VMQs (Silicone) and FKMs (Viton ®) that are certified to FDA, USDA, 3-A Sanitary, USP Class VI and ANSI/NSF standards.
Viton ® is a registered... Read More
Laboratory Testing Inc. provides NIST traceable (National Institute of Standards and Technology) and A2LA accredited calibration services for a wide range of gages, measuring tools, standards and measuring instruments. Calibration services compare the performance output of a tool or measuring... Read More
The 5001iX is a 5 kVA flexible AC/DC power source with a high performance power analyzer. The 5001iX is capable of handling complex applications that have traditionally required multiple instruments. The sleek integrated design of the 5001iX avoids the cable clutter that is commonly found in AC... Read More
The CALOG-LC Load Cell Calibrator is ideal for testing 4 and 6 wire load cells, checking insulation breakdown, weighing system calibration, and simulation. Combining features from the PVS-10 load cell simulator and the LCT01 load cell tester, this is a scale technician's most powerful tool. Read More
Customers who participate in Camstar Education are consistently better prepared for system implementation and typically have better long-term project success rates than their peers. Camstar offers quality coursework to support all levels of Camstar Product training Read More
The Camstar Enterprise Platform is the foundation for top-tier global manufacturers and product innovators to enable design for quality, lean manufacturing, supplier quality, rapid NPI, and higher profit margins. Integrated with ERP, PLM, SCM, CRM, and the shop floor, Read More
Camstar Manufacturing is the industry’s most robust and easiest to use Manufacturing Execution System (MES). Camstar Manufacturing supports very complex process workflows, high volume automated data collection, mass customization, discrete assembly, batch process, rolled products, and more. The... Read More
Comar is a specialty packaging company in the United States with a reputation for quality, service, and creativity since 1949. Our scalability, wide range of sustainable materials, and dynamic operational platform will help bring your product to market with innovative, industry-compliant... Read More
CANNON's CAV® 4.2 is a fully automated, dual-bath, benchtop viscometer with two 14-position sample handlers for unattended D445 processing. Each of the two Ubbelohde-style tubes (one per bath) covers a 100-fold viscosity range between 0.5 mm²/s (cSt) and 10,000 mm²/s (cSt) from 15 °C to 150 °C... Read More
Cannula manufacturers vary worldwide in terms of quality, cleanliness, technical expertise, consistency and credibility. ISPG prides itself on over 29 years of supplying the highest quality medical needles with an emphasis on integrity, both with our products and with how we deal with our... Read More
Imada cap torque testers measure cap tightening or loosening. The DTXS series cap torque tester can be used for rapid cap testing. The MTS allows for more accurate and repeatable results by maintaining a constant capping speed. Both testers have several ranges up to 85 lbf-in. Read More
IST thin film capacitive relative humidity sensors are capable of measuring 0 to 100% relative humidity and operating at temperature ranges of -80°C to +190°C. The humidity sensor product line features sensors with excellent linearity, low hysteresis, fast response times, and high chemical... Read More
Carbon steel spring wire is a large and widely used product for spring applications. Produced in an extensive range of diameters, coatings, packaging, hardness, tensile and surface conditions, Carbon steel wire is ideal for parts subjected to high stress or frequent stress repetitions.... Read More
Made to order from 0.5 to 2.54 mm and any unique pitch. Nicomatic offers a wide range of cables for board to board environment. FFC are soldered directly or mated with ZIF/LIF standard connectors.
High Flex Life
High-Temperature Options Available
Optional Retention Tabs
Optional Gold... Read More
Component solutions for coronary and peripheral vascular angioplasty & stenting, electrophysiology, diagnostic catheters, angiography, implantable CRM leads, structural heart applications, etc.
The most complete range of extrusion solutions for cardio- & vascular device manufacturing, all under... Read More
Protomatic supplies components for LVADs (left ventricular assist devices) as well as aortic punches, among its medical device offerings. These devices are used to implant replacement heart valves as well as arterial bypass grafts for repairing damaged arteries. Read More
Inspects for open flaps on cartons, prints lot and date codes onto cartons, and provides a visual verification of the printing. Now available with a label applicator.
Part of serialization / track & trace solution for cartoning. Integrates with most existing cartoners. Stand-alone, validatable... Read More
Pharma-cartoner, high speed, no tool change-over, batch mode recorded in e-file, small footprint, open access guarding.
High quality without European pricing. Variety of custom infeeds. Commissioning documentation package included.
The Stealth II offers exceptional flexibility, with... Read More
Our most popular product is the Cartridge heater. We make low to medium and high watt density cartridge heaters. Cartridge heaters provide localized heat to restricted work areas requiring close thermal control. Dies, platens and a variety of other types of processing equipment are efficiently... Read More
The Humphrey Cartridge Insert Series are available in 1/8, 1/4 and 1/2 orifices as poppet valves or 1/8 and 1/4 orifices as diaphragm poppet valves.
Designed specifically to incorporate into OEM products to become a proprietary and unrecognizable component of these products.
Available for... Read More
Watlow designed and manufactured the first swaged cartridge heater and revolutionized the heating element industry.
With premium materials and tight manufacturing controls, Watlow's cartridge/insertion heaters provide superior heat transfer, uniform temperatures, resistance to oxidation and... Read More
Boston Matthews are the inventors of the Caterpillar Take-Up (Puller), (Caterpillar Take-off) and with over 10,000 units in daily operation throughout the world the Boston or Farris Puller is classed as the Industry Standard Caterpillar Puller.
The importance of the Puller should never be... Read More
With years of experience testing endovascular devices, heart valves and pacemaker leads, our cardiovascular device testing programs are among the best in the industry. Our Engaged Experts assist with test design, product feasibility, protocol development and test inspections.The medical device... Read More
We have 3 certified class 10,000 clean rooms, one of which is specifically designed and controlled for processing silicone components. Our specialties are: Dip molded balloon cuffs, assemblies with cuffs, wire reinforced silicone Cannula bodies, single and multi lumen tubes with inner diameters... Read More
The Cavro Centris Pump is a compact syringe pump module for use in OEM laboratory instruments, setting new standards for accuracy, reliability and precision. It offers a broader working volume range from a single syringe size compared to similar OEM pumps, enabling you to do more with one pump... Read More
The Cavro Smart Peristaltic Pump is a compact unit for continuous flow applications. Designed to provide highly reproducible flow rates, with minimum pulsation, the eight-roller unit features PharMed® tubing and nylon barbs for long life of all fluid contact surfaces.
• Improved throughput and... Read More
Galil's CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port... Read More
• Customized tools for special surfaces
• Easiest, most effective way to clean pipes, soft wall curtains tanks and other hard to reach areas
• CE MultiSurface Cleaner™, CE Softwall Cleaner™ and CE Tank Cleaner™ are available for every surface in your clean or controlled environment
• High... Read More
• Faster, easier and twice as efficient as traditional methods
• Allows you to achieve your contact time requirements for common disinfectants, and still reach an excellent cleaning performance with up to 99.99% bacteria removal
• Clean twice the area with the same mop head
• Double sided mop... Read More
CE Mark is the European Community requirement for selling devices within Europe. This means that without the CE Mark you cannot sell your medical device within the European Community. The CE Mark represents compliance with a specific device directive which can be achieved through self assessment... Read More
• Clean and Controlled Environment flat mopping
• Lightweight, double bucket system allowing separation of dirty and clean liquid, minimizing cross contamination
• Fully autoclavable
• Touchless wringing of mops
• High performance, microfiber, single-use mops available ideal for use on floors,... Read More
Load Cell Central, a designer and manufacturer of custom weighing systems, load cells, and other cutting-edge electronic weighing and force measurement equipment, now has available a high performance, cost-effective means of automatically finding and monitoring the center of gravity for any load... Read More
Eppendorf is a manufacturer of high quality centrifuges. The portfolio consists of two kinds of centrifuges: microcentrifuges and multipurpose (or tabletop) centrifuges. Eppendorf microcentrifuges can spin most vessels from 0.2 mL to 50 mL at speeds up to 30,000 x g (17,500 rpm). Eppendorf... Read More
High compression strength, hardness and wear resistance, Alumina heaters facilitate high heat resistance and high thermal conductivity applications. Ideal solution for small to mid-size heaters where uniform surface temperature is required, Alumina provides the highest insulation standoff per... Read More
The purpose of a radial bearing is to reduce rotational friction and support loads. This is achieved by using two races to hold the balls and to spread the load through the balls. As the bearing race rotates it causes the balls to rotate. The ball provides for substantially less rolling... Read More
Materion (formerly Zentrix) is a leading manufacturer of ceramic packages for RF power transistors and MMICs. We offer BeO packages for VMOS and bipolar transistors. Our brazed ceramic air cavities are suitable for high power Si and GaN transistors. We are the exclusive vendor of our CuPack... Read More
North America Certification
North America offers significant opportunities to launch and sell your products. The right product certification mark is key to opening doors to markets in Canada and the United States. CSA Group is a recognized third-party certification body and testing agency with... Read More
LNE is committed to providing manufacturers with the technical solutions they need to ensure quality, speed innovation and offer products throughout the world. Our 770-person staff includes engineers, technicians, researchers and other experts in a variety of major sectors.
Our LNE/G-MED... Read More
EXCELLENCE FOR EVERY INDUSTRY
Since 1996, Excel Translations has been serving the globalization needs of businesses and organizations worldwide, including many Fortune 1000 companies.
From our operation centers in North America, Europe, and South America, we provide a wide range of... Read More
Cetus is a proprietary line of permanent-care, coated textile fabrics for use in clothing care and industrial labeling applications. Cetus represents the state of the art in printable textile fabrics and has been proven to far surpass conventional printing materials in durability, versatility... Read More
CGI Precision gearheads are available in NEMA sizes 17 to 75. Metric equivalents are also available. Standard ratios ranging from 3:1 to 700:1, in planetary and spur designs, with custom shafts and multiple mounting options, are offered in right-angle, in-line, and offset configurations. The... Read More
chainflex® continuous-flex cables deliver optimal performance in demanding, flexing applications on all types of automated machinery. They have been tested over millions of cycles in all types of conditions in the igus® test laboratories.
The chainflex® range was developed by igus® in the 1980s... Read More
Qosina offers medical in-line drip chamber assemblies, in stock and ready for immediate delivery. Several drip chambers are equipped with a cover that allows 20 drops/ml, and some are offered with a 15 micron filter. Qosina stocks a non-vented solution filter drip chamber, and a non-vented drip... Read More
Check valves for use in biomedical, medical, and industrial applications. Stainless and brass check valves, plastic check valves made from PVC PVDF , polypropylene, and nylon. Plastic check valves include diaphragm valves, duckbills valves,and spring loaded valves. PVC and PVDF check valves for... Read More
The Checker® vision sensor is an award winning all-in-one vision sensor with built in camera, processor, lighting, optics and I/O capable of detecting and inspecting up to 6,000 parts per minute–all in an industrial IP67 enclosure small enough to fit into the tightest of spaces.
Checker... Read More
Laboratory Testing Inc. performs both Instrumental Chemical Analysis and classical Wet Chemistry methods to provide customers with information about material composition, including trace elements and impurities. Many test results can be provided qualitatively and quantitatively.
Our chemists... Read More
Experience is of key importance when it comes to Analytical Chemistry. Our Chemists combine their years of experience with modern techniques and equipment to provide accurate, reliable results. They have experience and knowledge involving many types of materials including metals, plastics,... Read More
The IMR chemical analysis lab has numerous analytical tools at its disposal, all geared toward providing accurate, NIST traceable analyses of metals and process solutions. IMR’s alloy chemistry lab is among the best in the world, employing an experienced, professional, and knowledgeable staff... Read More
Companies seek chemical analysis for a wide variety of reasons. Many require routine chemical tests for quality control or quality assurance purposes. Unlike other labs, Chemir’s chemical testing services are customized according to each individual project’s needs. We analyze chemical products... Read More
NAMSA's Chemical Process Indicators are designed to transition color upon exposure to a sterilization process. The indicator label color indicates at a glance whether or not the product has gone through the sterilization process.
NAMSA CPIs are ANSI/AAMI/ISO Class 1 compliant and are suitable... Read More
The NSL Analytical chemical testing laboratory provides a broad range of chemical analysis services including elemental analysis and classical wet chemistry. Our testing labs provide analytical testing throughout a variety of sample substrates to levels ranging from:
• Trace analysis (10 ppb to... Read More
Geneva Laboratories’ chemistry department provides quality compendial and non-compendial chemical analysis of raw materials and final product. Compendial testing of pharmaceuticals (APIs and drug products), food additives, and reagent chemicals is performed under one of the following... Read More
Designed for cleanroom and controlled environments, the Choice® Edge is a continuous knit polyester wiper with four-side border sealed edges. When tested for fiber release using IEST test standards, Choice® Edge released fewer fibers than the average sealed edge wiper. With a consistent border... Read More
Modeling and simulation of many RF applications and antennas present a challenge in terms of speed, required memory, and accuracy. INTEGRATED Engineering Software introduces CHRONOS, INTEGRATED’s new time domain solver for modeling and simulating 3D RF and microwave applications.
The move... Read More
Details: Complete redesign, reverse engineered product, and advised necessary enhancements for molding, part design and material selection. Provided design capable of withstanding higher forces which were reflective of true forces during real life operation. Removed defects in molding, thereby... Read More
Leader Tech's Circuit Board Shielding provides board level protection from EMI. Available in a broad range of sizes, the snap-in dimple design provides a positive contact and downward stop while allowing removal of the cover for accessibility. Read More
As the premier supplier of power system components, Interpower has what you need to complete your projects, including circuit breakers. Interpower has no minimum order requirements, plus same day shipping is available on in-stock Interpower products.
Electronic equipment is often designed with... Read More
Watlow's circulation heaters are compact heating systems for fluids and gases. These heaters are ideal for applications such as purified and inert gases, supercritical fluids and liquids like de-ionized water for use in semiconductor and electronics industries as well as for general liquid and... Read More
The INTROTEK® Continuous Level Detector (CLD) is available in a standard configuration (pictured at left), as well as customized designs to meet customer application requirements. The unique pulsed, non-invasive design enables the liquid level from the bottom of a vial container or tank to be... Read More
TSS offers comprehensive testing, certification, and maintenance of unidirectional flow devices (also known as laminar flow units or clean benches). Our skilled technicians are authorized to perform warranty repairs for all major equipment manufacturers. All testing is performed in accordance... Read More
Our Class 10,000 (ISO Class 7) Clean Room is available for manufacturing and assembly of medical devices requiring sterilization. Our operators all follow a high level clean room protocol for gowning and entrance to the room Read More
To provide our customers a single source solution, we offer ISO 7 or Class 10K clean room assembly and packaging services to complete your project. Assembly operations can be simple or complex, since we have the ability to build custom fixtures to aid in the assembly process. Examples of... Read More
Precision Associates’ clean room manufacturing area is, in effect, a miniature replication of our regular manufacturing facility. Nearly all of the equipment used in our regular manufacturing processes is also included in our 6,000 sq. ft. ISO14644-1, class 7 (10,000) clean room.
The compounds... Read More
Our clean room areas consist of Class 7 (10,000) & Class 8 (100,000) certified environments, allowing the flexibility to provide customers with true turnkey operations at any pre-qualified press.
Our strict Quality Management System registered to ISO 13485 & ISO 9001 contains standard operating... Read More
Class 10 Cleanroom Servo Press
The Janome clean room servo press is one of the most advanced manufacturing systems in the world. The Janome servo press allows for simultaneous control over force, position, pressing speed and dwell time. With the Janome servo press you can identify bad parts and... Read More
Adhering to strict protocols and methods, PTI meets the demands of industries requiring ISO 14644 cleanroom specifications, including bioburden and electrostatic discharge (ESD).
Our cleanroom operations total 4000+ square feet, are certified to ISO Class 8, and include the following... Read More
Choosing the Right Solution
Expert knowledge over all aspects of the cleanroom development.
Making an informed decision ensures the right cleanroom solution. With over 30 years of experience, Clean Rooms West experts work directly with clients to evaluate the various clean room options and... Read More
Design and build is a project delivery method where both the design and construction of the cleanroom is contracted and managed by a single source.
As the single point of contact responsible for the successful implementation of the entire cleanroom project and by using the Design & Build... Read More
Medical molding is a core technology of ABERDEEN and represents a cutting edge solution to the manufacturing challenges of healthcare companies who market medical devices. We supply molded components and sub assemblies for critical care products, utilizing state of the art vertical insert... Read More
Infinity CleanRoom Solutions is an ISO class 7 (10,000) custom manufacturing plant. This 11,500 sq ft facility focuses exclusively on clean room medical device and medical instrument opportunities. With strong quality systems (ISO 13485) and experience in launching molding and assembly programs... Read More
Cleanrooms, by definition, are designed to control airborne particulate and environmental conditions. Cleanrooms can be positive or negative pressure environments that sweep a specified area with HEPA filtered air. Critical pharmaceutical, microbiological, and nanotechnological areas require... Read More
PortaFab designs and manufactures modular cleanrooms and cleanroom building components that service the specific requirements of the pharmaceutical, micro-electronics, and biotech industries as well as a general applications that range from food processing to paint finishing. Read More
CLEARFLO clear plastic tubing is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated tend to make the tubing less pliable. If chemical resistance is of major concern, in-plant tests are suggested.
In clean... Read More
Clever is a web-based solution for inventory optimization and intelligence. Designed to generate the inventory intelligence necessary to make smarter decisions about where to invest in inventory. Our solutions are delivering business results that reduce inventory, achieve targeted service levels... Read More
Keystone Compliance is a fully-compliant climatics testing lab with the expertise and experience to assist manufacturers in meeting their regulatory compliance needs. What differentiates Keystone Compliance from other EMC labs are its staff, technical capabilities, facility and... Read More
Preparation of clinical materials in this expanded facility complement the extensive activities currently performed in the conventional development laboratory and pilot plant. Batch preparation, aseptic processing and lyophilization are completed in a unique aseptic fill/finish facility with... Read More
The Clinical Evaluations Division of Consumer Product Testing Company, Inc. has provided dermal irritation and sensitization testing since the late 1970's and has continued to expand and offer a variety of other test methodologies. These methodologies include: claims substantiation/efficacy,... Read More
Our services include developing the clinical protocol, setting up and interacting with the IRB (Institutional Review Board), submitting the IDE (Investigational Device Exception), recruiting and working with the investigator, monitoring the trials, data gathering and analysis, project... Read More
The Clippard NIV Series Media Isolation Valve is a solenoid-operated device that uses a flexible diaphragm to isolate the actuation mechanism from the fluid path.
Media isolation valves are commonly used for a wide variety of applications, including those that require precise, repeatable... Read More
Connector developed for use in appliance manufacturing. In conjunction with the closed back cover inserter applicator, this connector is top rated for safety and ease of use in appliance manfuacturing applications. Read More
Comar offers a large variety of plastic closures to meet any need. We offer a huge stock of standard plastic closures, featuring liners, unlined, and linerless options. In addition to our stock of plastic closures, tips, and adapters, we also provide plastic bottles, oral syringes, dropper... Read More
CMD - Precision Manufacturing Group (PMG) is a division within Custom Mold & Design that specializes in the manufacture of machined components, assemblies and fixturing.
Reduce your lead times and get machined parts from the experts in ultra-high precision. We can support all your needs... Read More
The Shaped Seal Pouch System by CMDproduces peelable chevron shaped surgical pouches at speeds up to 220 cpm. Products include shaped seal pouches, surgical peel pouches, self-seal surgical peel pouches and autoclavable tube stock. These high-quality pouches are made from paper or Tyvek® sealed... Read More
3-axis CNC Bed Mill with Centroid CNC Control. 220 Volts, 3 Phase or with phase converter, 220 volts, single phase. 5 hp Main motor, 40 taper spindle, Maxi torque-Rite Air Power draw Bar Standard. Made in Taiwan with an American Control. Stocked in Pomona, CA. 91768 and distributed from over 70... Read More
We understand the importance of investing in high-quality machinery and skilled professionals to optimize production and ensure the quality of the end-product.
By leveraging the benefits of CNC fabric cutting, we are able to precisely cut several layers of fabric according to customer-specified... Read More
Schmit Prototypes' CNC machining capabilities enable us to produce the finest, highly accurate visual design models, full-functioning engineering prototypes or master patterns. Fast turnaround and high accuracy on visual models can be achieved with a wide variety of materials including various... Read More
Since the beginning, EDM Mfg, Inc. is constantly assisting our customers with various designs ranging from simple tools and fixtures to complex prototypes. We are the type of machine shop that is willing to work with and for our customers. EDM Mfg., Inc. is focused on wire EDM machining and CNC... Read More
CNC Machining using the most up-to-date versions of Mastercam is a large part of our plastic forming process. In addition to plastic, we also machine aluminum and resins for molds and fixtures as well as parts. Take advantage of our design services as well as our expertise in problem solving.... Read More
By investing in the latest CNC turning technology, we have the machines and the knowledge to be able to complete a job in one setup with limited operations. This means we get more accuracy in our machining, less user error, and more competitive pricing for our customers. Read More
Computerized-Numerically-Controlled (CNC) precision equipment is used to attain closer tolerances, fine finishes and the highest levels of quality and productivity. Gasser is equipped with over 40 small and large CNC machines, which includes our most recent acquisition of a 5 axis Mazak Integrex... Read More
The CNC machines available at Xact for small hole EDM have automatic electrode changers for efficient unattended CNC machining. Xact's small hole EDM capability is in many ways similar to a drilling operation but it offers the advantages of EDM such as very low machining forces that make the... Read More
IMR Test Labs knows Thermal Spray Coatings. Whether performing a failure analysis, certifying TS operators for the CTSO program, checking your starting powder or providing thermal spray metallography training courses, IMR is your first choice lab for everything Thermal Spray.
We provide... Read More
Cobra Systems VnM Sign & Label Maker is the easiest sign and label making print system available. It is a complete stand-alone industrial label, tag and sign print system (no PC needed).
Cobra’s VnM Label Maker comes with easy to use label, safety sign and hazard warning templates built in, to... Read More
CODAN offers German-engineered bulk, non-sterile components manufactured at CODAN facilities in Europe. Over 85 molding presses run around the clock, in conjunction with automated machinery, to supply drip chambers, roller clamps, connectors, injection sites, spikes, check valves and other high... Read More
The CODAN Label product line is based on a singular dedication to quality patient care and safety of the healthcare worker. We work closely with clinical practitioners to uphold our commitment to innovative clinical applications and new product development which is why CODAN Label products can... Read More
CODAN US Corporation is a manufacturer of quality custom IV therapy products for the OEM and private label markets. We offer bulk, non-sterile, sterile products and MultiVac packaging in a number of blister package sizes. We manage our own manufacturing and have the flexibility to meet your... Read More
IDM’s Coefficient of Friction Testers have proven to be a fast, reliable and accurate method of determining coefficient of friction. Our range of COF Testers are used to determine the static and kinetic friction of plastic film, sheeting, paper and other sheeted material coatings. Their... Read More
This instrument is used to determine the coefficient of static friction of most packaging materials by measuring the angle at which one test surface begins to slide against another inclined surface as the incline is increased at a constant and prescribed rate. As the plane rises at a rate of... Read More
This instrument is used for determining the linear change of a refractory caused by a change in temperature and to ascertain the reversibility of these characteristics.
It may also be used to determine the expansion and contraction characteristics of raw materials and refractories that do not... Read More
If you need specialty metals or alloys coil or strip, for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of rod and bar products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut... Read More
CoilBoss™ Retractile Cords by Northwire feature design and engineering that delivers unsurpassed reliability and performance in the most extreme environments. Guaranteed to meet strict technical, mechanical, and environmental requirements, CoilBoss™ is ideal for factory automation equipment and... Read More
G-Force Hydraulic jars use a piston (metering device) and oil to create a time delay. Once the energy is stored, the jar piston bypasses (step), creating a hammer-and-anvil effect that imparts an impact load to the end of the tool assembly.
As the jar is pulled in tension, a piston moves... Read More
CoMatryx sterile collagen wound dressings are composed of 100% specially prepared collagen. The products provide a collagen-rich moist healing environment for the treatment of acute and chronic wounds. They form a protective gel in the wound to support new cell and tissue formation, prevent... Read More
RTP Company's color expertise dates back nearly 50 years. Our unmatched understanding of plastics coloring comes from working with every polymer from polyolefins to PEEK.
This history and experience allow us to produce masterbatches using the best technologies available in pigments,... Read More
The Colour Check Cabinet was produced to answer visual colour matching needs. Used for assessing colour changes under different light sources, to determine suitability of materials for industrial applications where there is the need to maintain colour consistency and quality. Fluorescent... Read More
ProMed manufactures custom combination components. This means we produce drug eluting silicone moldings that are meant to last the lifespan of a human. ProMed maintains this level of quality by utilizing its ISO 7 / Class 10,000 Cleanroom and staying up to date with the latest FDA and ISO... Read More
For Cometech, RKS designed a digital stethoscope; that is, a hand-held sound monitor device that can be used as a complement to or replacement for the traditional stethoscope, with no special training required – ideal for medical students seeking to learn stethoscope skills. The COPE stethoscope... Read More
A manufacturer of medical diagnostic test systems required unique equipment for automatically manufacturing their product. To minimize the opportunity for contamination, the process required a class 100 environment with a minimal number of operators.
Creative... Read More
We don't just make parts, we make highly complex fitted assemblies every day, in fact it's one of our specialties. Producing thousands of functional assemblies year after year gives us thorough insight into all of the modern manufacturing methods that today's Mechanical Engineers are using in... Read More
As your full-service outsource partner, we can design, develop and manufacture all components, controls and electrical and mechanical functions in your product, as well as assemble them into a finished device for testing, validation, and final production. Read More
Quality System compliance monitoring has increased by both the US FDA & by the foreign competent authorities & their agencies. Keeping up with best practices is time-consuming. We have the experience to train your staff, & serve as your interface with FDA if needed. We can conduct a Quality... Read More
CompliantPro is the most comprehensive compliance management solution on the market today. CompliantPro offers the advantage of a robust, extremely flexible environment, adaptable to virtually any IT infrastructure. With CompliantPro, you can manage processes for communicating, monitoring, and... Read More
NDC is the highest volume provider of semi-finished and finished Nitinol components for the medical device industry.
We produce an expansive array of components for the Medical Device and Industrial markets. From simple and delicate wire forms to complex and unique laser cut designs, our... Read More
Element provides a wide variety of medical device testing services. Our engineering professionals are experienced in every stage of testing for medical device design and development - from test protocol development to prototype/feasibility trials to testing for 510(k) and other regulatory... Read More
Over the last several years we have compiled the ability to produce additively manufactured and RTV cast parts that are fully capable of handling the harsh environments that come along with the internal combustion chamber powered engines. Having successfully created many different under hood... Read More
Specialized Liquid and Gel Compounding.
From scale-up to product transfers, Unicep can handle the production of your specialized liquid or gel product. Working within a FDA and cGMP environment, we ensure that quality ingredients are received from our approved suppliers. Our compounding... Read More
Creative thinking at play.
We use our understanding of your users’ needs to imagine better futures and better experiences. In this phase, the most implausible ideas can inspire the most innovative solutions.
We use sketches to problem solve. Ideas begin to take shape on paper as we play with... Read More
Conductive thermoplastic compounds offer reliability and value for applications that require dissipation of static charges, protection from electrostatic discharge (ESD), or thermal management.
Specialty compounds can be tailored to offer electrical properties spanning the surface... Read More
Leader Tech announces that the company’s newly expanded line of TechSIL Conductive Elastomer compounds received QPL certification by the Defense Logistics Agency. This unrivaled commitment to excellence distinguishes Leader Tech as the only MIL-SPEC approved & certified manufacturer of... Read More
The IST AG LFS1305 conductivity sensor offers a typical cell constant of 0.86 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like... Read More
Sometimes known as safety connectors, DIN or protected pin jacks, our line of single and multi-pole TouchProof jacks are designed to be used with our Touchproof line of plugs. Our plugs incorporate the use of machined, gold-plated contacts to ensure efficient function, long-life and maximum... Read More
Before you begin your quality control initiatives with SPC software, you'll need to develop a strategic plan that addresses your manufacturing requirements. InfinityQS' expert site assessment services can provide your company with a comprehensive roadmap for planning, implementing and managing a... Read More
Whether it is at your facility, here in our laboratories, part of a conference call, or by written report, Chemir's staff is available for consultation on a variety of projects. Our independent consultants bring new perspectives and experiences valuable for problem-solving and product... Read More
There is a big difference between a laser and a fully optimized and integrated turnkey laser solution. The Photoscribe staff of engineers has over 18 years of experience in the field of laser marking. As a laser manufacturing company, PhotoScribe has unsurpassed knowledge of laser design and the... Read More
Few have the education and experience in Photonics to assist as broadly as The Photonics Group.
We have trained thousands and through train-the-trainer programs, tens of thousands. Not merely forced upon employees, our training sessions are sought after because we mix technical information with... Read More
Technical, marketing and business consulting in diagnostics and medical devices. Focus on commercialization of new technologies and products from the lab, through scale-up and regulatory, and into the market. Over 40 years' experience, successful track record. Experience also in intellectual... Read More
Since our start, we have established ourselves as SME (and recognized by the FDA) in 21CFR1040.10/.11. Not merely "filers", we assist in engineering and administration to make sure your filings go through smoothly and quickly.
We offer standard compliance engineering and filing packages or can... Read More
Employing Photonics-based standards and regulations such as ANSI Z136, IEC/EN60825, and 21CFR1040.10/.11, we ensure your product is not only safe, but compliant as well.
We offer standard compliance engineering and filing packages or can develop customized support services. All our work is... Read More
Eppendorf quality is a step above the rest! Worried about what could be leaching out of your plastic consumables that can affect your sample and assay results? All Eppendorf consumables are manufactured without the use of slip agents, plasticizers, or biocides – all substances which are known to... Read More
Consumables Manufacturing – Inteprod offers chemistry integration and assay research and development services for our diagnostic clients, including:
• Consumable manufacturing
• Assay Characterization
• Kit Development
• Conversion of Wet Chemistry to Lyophilized... Read More
From blister packs, clamshells and tri-fold clamshells, to POP housings and displays, to plastic ceiling panels and plastic dishware, we offer an endless variety of durable plastic products and packaging options for consumer goods.
•Custom product design and in-house tooling... Read More
Qosina stocks a selection of disposable medical waste containers. The smallest disposable medical container is a transportable shuttle, which is convenient and easy to carry. This allows for a simple, one-handed operation to open or close, and is equipped with a final locking mechanism for added... Read More
When an unknown material is found in a product, manufacturers need to know the source of contamination. Contaminant testing projects involve the determination of components at low concentrations (e.g. ppm levels).
A strategic technical approach is required to identify the unknown contaminant... Read More
- Contego 3 mAh - Lightweight, high energy density,sub-miniature size cylindrical cell with excellent cycle life
- Contego 50 mAh, Contego 60 mAh, Contego 225 mAh and Contego 325 mAh - Implantable grade lightweight, high energy density cells with superior rate capability and excellent cycle life Read More
With continuous motion assembly, multiple processes take place without interruption, unlike intermittent-motion systems. There are many benefits to using a continuous motion machine for assembly or continuous motion packaging.
Continuous motion machine benefits:
• Increased productivity
•... Read More
CES is an IBM Partner and an authorized reseller of IBM xSeries equipment. IBM Systems x offers advancements in scalability, reliability and performance.
System x solutions are the result of a design for building proven IBM innovation around industry-standard components. Solutions that span... Read More
Assembly of products in class 10,000 clean rooms
Contract assembly and packaging of disposables for other medical companies
Ethylene Oxide sterilizer onsite
Packaging in class 10,000 clean rooms or controlled environment
Compliance with regulatory requirements
Prompt customer service Read More
We have created some of the most unique and effective Photonics-based automation equipment in the world.
We offer standard compliance engineering and filing packages or can develop customized support services. All our work is quoted not-to-exceed for ease of budgeting and peace of mind. Read More
We are experts at application/integration of Photonics technologies and can create purpose-built equipment based on your design or specifications.
We offer standard compliance engineering and filing packages or can develop customized support services. All our work is quoted not-to-exceed for... Read More
From the very onset of a concept or through the results of lab research, we can create prototypes for all phases of product development. Seasoned systems engineering and program management keeps the development on track and all work is done so that prototypical development is compliant to... Read More
From LEDs to lasers and fiberoptics, our optical test capabilities can accommodate almost all Photonics sub-specialties and we have the resources to create custom fixturing as necessary.
We offer standard compliance engineering and filing packages or can develop customized support services. All... Read More
Any/all product safety and performance testing for Photonics technologies-specifically lasers and LEDs- is performed in accordance with ANSI Z136, IEC/EN60825, IEC/EN62471, IEC/EN60601, and 21CFR1040.10/.11.
We offer standard compliance engineering and filing packages or can develop customized... Read More
The second you are thinking of using a Photonics technology-from lasers and LEDs to fiberoptics- is the perfect time to get us involved. Not only can we assist in the theory and design, but make sure the product is safe and compliant before it becomes much more costly to do so.
We offer... Read More
Today’s changing business environment has led many companies to reduce the size and capacity of their R&D or QC departments. Jordi offers contract analysis services for those customers who need repeat analysis performed on an ongoing basis. This provides a cost effective solution and the... Read More
WALCO Tool & Engineering provides high value added contract machining services, machining of weldments and mechanical assembly of low production high quality parts. Size range is from 1# to 30,000# visit our web site for more information. Read More
We at KAL specialize in tight tolerance, cosmetic sheet metal fabrication. Anything from one-piece simple brackets to complete weldments and assemblies are common practice for us. The niche we seem to fit nicely is prototype thru low volume production 1-10000 pcs annual is common production... Read More
For over 20 years, medical device manufacturers around the world have turned to NovoSci for custom manufacturing and assembly needs. Our recent manufacturing experience includes custom tubing packs for cardiovascular surgery, small electronic assemblies, injection molding, custom assembly and... Read More
Complementing its multidisciplinary Research and Development Team, D&K Engineering has a world-class global contract manufacturing operation. From process design and production layout to a supply chain management that delivers materials on a "just-in-time" basis at competitive costs, we create... Read More
PSP's state-of-the-art multi-axis manufacturing equipment guarantees your requirements and specifications are consistently met at the lowest cost and result in the shortest time to market. PSP achieves lower costs with our lights-out production and robotic loading and unloading of finished... Read More
These days, everyone claims to have the best quality at the best prices. At Acme Monaco, we have worked years to develop services that go beyond the obvious in order to bring you total peace of mind for high volume parts.
Zero Inventory Costs -(ZIC) Don't ever be caught without parts because of... Read More
Definitive can provides startup manufacturing in-house. Definitive has partnered with contract manufacturers that provide domestic and offshore manufacturing and assembly design solutions. We encourage the end-manufacturer’s early involvement in the design process to minimize late design... Read More
Whatever you are looking for in an outsourcing partner, you will find it at Teamvantage. Whether it is a state-of-the-art facility with commensurate equipment, a reliable record of performance, capabilities that match your needs, an experienced and highly talented work force, or a single-source... Read More
FROM CONCEPT TO DESIGN, PROTOTYPE DEVELOPMENT;
DESIGN FOR MANUFACTURABILITY AND QUALITY CONTROL
We have developed unique processes, capabilities and disciplines to effectively address challenges of working with highly complex nature of life science and diagnostics biomedical instrumentation. The... Read More
Trident’s manufacturing ability to provide an uninterrupted supply of product that meets our customers’ exact specifications is the result of years of experience and continuous learning. Trident Manufacturing employs Lean Automotive principles and best-in-class medical device compliance... Read More
TESco’s expertise covers a wide range of polymer processing methods and includes several stages of medical device development and manufacturing. These areas include:
- Injection Molding
- Material Selection
- IP Assistance
- FDA Submission... Read More
Your Medical Contract Manufacturing Partner for Innovative, Full-system Instrumention.
KMC Systems manufactures complex platforms for use in the clinical environment. Our Manufacturing Execution Systems (MES) and Quality Management Systems (QMS) have evolved over decades of refinement. Our... Read More
Contact Tiodize to learn more about its medical injection molding and contract manufacturing capabilities. Tiodize is an advanced technology company specializing in the development, manufacture and application of products for the prevention of friction, wear and corrosion.
Its products are... Read More
Contact Tiodize to learn more about its medical mold making and contract manufacturing capabilities. Tiodize is an advanced technology company specializing in the development, manufacture and application of products for the prevention of friction, wear and corrosion.
Our products are utilized... Read More
The contract manufacturing, R&D design and advanced technical services capabilities of Omnica include: research and development; experimental fixture design; laboratory instrumentation; systems integration; process engineering; failure mode testing; accelerated life testing; lab bench testing;... Read More
Inteprod provides advanced manufacturing services to OEMs in the Medical Device, Medical Diagnostics, and Food Safety Diagnostics industries
Inteprod's full-service capabilities include:
• Design for Manufacturing (DFM)
• Design for Cost Reduction
• Quality & Regulatory Assurance
•... Read More
Hans Rudolph, inc. is a leading designer and manufacturer of respiratory valves and other respiratory products. Their innovative R&D design and contract manufacturing services are helping bring the field of Respiratory Healthcare into the twenty-first century. In addition to their full catalog... Read More
At AMTEC, we pride ourselves in developing solutions that work. We provide manufacturing services across a wide spectrum of products for aerospace, automotive, commercial, energy, medical, pharmaceutical, telecommunication, and other applications.
We utilize advanced technologies and... Read More
CarTika Medical is a full-service medical contract manufacturing company. Our broad expertise and advanced facilities allow us to serve you in a wide-range of areas:
Material selection and formulation
RF tip forming
Pad... Read More
PVA Tepla America offers contract processing services for precision plasma cleaning. Our techniques have been implemented for over 40 years.
Precision cleaning is a requirement for a broad spectrum of industries with applications ranging from semiconductor wafer cleaning in micro-electronics... Read More
As a contract R&D, design, engineering and manufacturing services provider to a wide range of clients in the medial/life sciences industry, D&K Engineering offers the following services to medical/life science organizations:
New product development;
Medical electronics and technology... Read More
At NovoSci, our mission is to maximize the return on your time and financial investment in supply chain services. One of the highest costs in disposable product manufacturing is shipping. We own all of our facilities and do not have to ship your product to a third party vendor for any of our... Read More
CI Medical, Inc. specializes in difficult-to-print jobs, including those requiring plasma gas pretreatment (promotes ink adhesion on challenging substrates), precision imprinting, extremely tight tolerances and radiopaque marking solutions on such unprintable substrates as PTFE, silicone, PE,... Read More
Ed Fagan Inc. has a large inventory of Controlled Expansion Alloys for applications where metals must form a hermetic seal with glass or ceramic. In order to prevent the glass or ceramic from cracking, the thermal expansion characteristics of the alloy must closely match the thermal expansion... Read More
For Components that Require a Controlled Manufacturing Environmenet and an Array of Specialized Assembly and Packing Services
Our controlled room assembly and packaging services include:
• Manufacturing of Custom designed Medical Devices, which include assembly and packaging
• Speed and... Read More
Our controlled environment manufacturing facilities and services are designed for a multitude of medical applications, including:
• Wound Care products
• Health Care Products
• Custom-designed Medical Devices, including assembly and packaging
• Multi-Printed and Laminated products
• Gel Tab... Read More
At Industrial Indexing Systems we provide integration and control connectivity to your automation network. From the Human Machine Interface (HMI) to the Programmable Logic Controllers (PLC) we leverage the strength of an ethernet based communications system to control all automation... Read More
-Extensive sewing manufacturing capabilities & experience.
-100+ top-of-the-line programmable sewing machines.
-Continuous investment in new machines.
We provide a wide selection of highly efficient industrial-grade sewing equipment to meet customer specifications. Each machine is equipped with... Read More
Standards: none higher than those required for products used in medicine. We work with customers to ensure all applicable regulations and standards are met.
Complex products: close customer consultation provides the inspiration for new approaches to materials usage and production methods.... Read More
CANopen, EtherCat, and Macro communication protocols are offered on the Xenus and Accelnet servo motor drives and Stepnet stepping motor drives providing distributed control solutions. The distributed architecture simplifies the amplifier-to-controller wiring. A single high-speed communication... Read More
The Clippard Cordis is a revolutionary microcontroller primed for escape velocity from a proportional control market. Built with the highest quality Clippard EVP and DVP proportional valves at its heart, the Cordis is designed to outperform the competition in every way. With unparalleled... Read More
Originally developed for sand casting cores for the automotive industry. Holds about 30# of sand castings.
Cavity Depth: 2"
Cavity Opening at Top: 6" x 24"
Dimensions - Flange to flange: 8" x 26-1/4"
Starting Gauge: Formed from 3/16" (0.187") Styrene
Part Number: 1CT2.0REC-WHT Read More
For critical procedures, access and delivery systems require high-performing core wires, ground wires and hypotubes.
Heraeus produces a wide range of core wires, stiffening wires, ground wires, stylets and hypotubes used for surgical access and delivery systems. Heraeus access and delivery... Read More
TelcoMotion's coreless DC motors are widely used in medical equipment applications, such as X- ray, peristaltic pumps, and ophthalmic tools.
Benefits of our coreless DC motor:
•Compact size (About 1/3 size and 1/3 weight of PMDC motor when compared with same power)
•Low inertia (For... Read More
Small DC motors from MICROMO differ from conventional, iron rotor DC motors in that they are equipped with an ironless, self-supporting, skew-wound copper coil. Because of this construction, the rotor is very light yielding a low moment of inertia. The rotor also rotates smoothly without cogging. Read More
Pro QC auditors conduct corrective action services utilizing the full range of quality techniques including process audits, root cause analysis, statistical quality analysis (SQA) and failure mode and effects analysis (FMEA). Read More
There are several corrosion resistant coatings that can be engineered to provide a corrosion resistant barrier for many substrate materials in many corrosive environments. Nickel-chromium and cobalt-chromium alloys produce very good corrosion resistant coatings. These materials can be deposited... Read More
Accelerated intergranular corrosion, salt spray (salt fog), humidity, temperature and passivation testing are performed at Lab Testing to help customers determine the impact of environmental conditions on their material or products. Testing and analysis can help compare materials, estimate the... Read More
Corrosion, in its myriad forms, costs industry and manufacturing in the neighborhood of $3.5 billion annually. The experts at IMR Test Labs can offer testing and consultation services to provide failure and root cause analysis to identify and mitigate costly field and plant failures. Our... Read More
DEACOM Integrated Accounting and ERP Software provides both security specialization and comprehensive functionality for cosmetics and personal care manufacturing companies. The DEACOM ERP Software System features the security and audit trails necessary to adhere to current Good Manufacturing... Read More
Martek Power is a leader in providing Military & Aerospace Grade Commercial Off-the-Shelf (COTS) power conversion solutions. Our development and manufacturing facilities for these linear and switching rugged power supplies located in Torrance, California, USA (50,000 square foot) and in Lyon,... Read More
Colder's wide range of quick disconnect couplings and fittings help you make cleaner, faster, safer, and smarter medical connections.
Colder Products offers both standard and custom-engineered solutions for a wide variety of critical fluid and air handling medical applications, including... Read More
The CPG2400 Digital Barometer is a great replacement for mercury manometers or when a higher accuracy is required in your barometric pressure measurement. It has a range of 415 to 880 mmHg absolute (8 to 17 psia) and accuracy of 0.03% of reading. It is perfect for monitoring barometric pressure... Read More
U.L. Recognized - Guide SEOT2, file SA4093 for use in air conditioning equipment.
C.S.A. Certified - Guide 165-E-90, file 016386-0-000 for use in air conditioning equipment.
Crankcase heaters are used to overcome the problem of migration and condensation of refrigerant in the... Read More
Tubing-Processing Equipment from Clean Room Devices includes the CRD100 Tube Cutter. This semi-automatic, table-top device is designed for precision and speed in the production environment. The actuating button found on the adjustable slide block makes the medical tubing cutter ergonomically... Read More
Tubing-processing equipment from Clean Room Devices include the CRD120 Tubing Cutter. This semi-automatic, table-top device is designed for precision and speed in the production environment. The foot pedal allows for easier operation when using both both hands to handle tubing. This precision... Read More
Clean Room Devices tubing-processing equipment includes the CRD130 Econo-Cutter, which is easy to use and economical. There is no power required and the locking stop-block allows for easy adjustment for length and accuracy. You can cut any diameter from 1/32 to 3/4 of an inch.
Technical... Read More
Tubing-Processing Equipment from Clean Room Devices include the CRD200SS Tubing Expander. This device performs a controlled internal expanding operation of most plastic and rubber tubing. The foot pedal and robust air cylinder will perform an expanding operation, increasing the ID of your tubing... Read More
Clean Room Device's tubing-processing equipment includes CRD215 Stainless Steel Time Delayed Heated Tube Expanders. This heated tubing expander allows barbed fittings to be installed in stiffer tubing that would otherwise split from fitting insertion. A controlled internal expanding operation of... Read More
Curtains/Dividers from Clean Room Dividers include the CRD310 Pass Thru Window, which provides an automated means to transfer goods and materials between interior facility walls. The unit is modular and designed for easy installation between studs. It operates on 120v and does not require... Read More
Tubing-Processing Equipment from Clean Room Devices includes the CRD-400 Fitting Inserter, designed to install tubing on any part with a barbed fitting. It is optimal for complex geometry that is inherent in Y, T, Union fittings, as well as air switches and manifolds. The CRD-400 also features a... Read More
Clean Room Devices supplies tubing-processing equipment such as the 3-Jaw Expander, which allows larger barbed fittings to be installed in tubing, with the inserted fitting being scooped off of the jaws in one easy motion. A controlled internal expanding operation of three jaws will spread the... Read More
Marktech carries the full line of Cree LED Die Chips ranging in power from low power versions used in mobile devices for extended battery life up to demanding high power versions for outdoor lighting applications. Cree offers precise die bin sorting and power selection within the die ranges. In... Read More
Now with GE S-400 approval for Creep Testing, the Mechanical Testing Department at our Portland, OR facility is well equipped to perform Creep and Stress Rupture testing of a wide variety of materials to both standard and customized specifications. A number of test frames are available,... Read More
CrimpFlex™ housings are made of thermoplastic filled with fiberglass classified UL94V-0. They are separated into two product ranges in 1.27 mm & 2.54 mm pitch and are dedicated to a use with Nicomatic contacts.
RoHS & REACH Compliant
UL E 125469 Read More
Are YOU presently concerned or involved in any of the following?
Recently received a notice of a forthcoming FDA audit
Received an FDA Warning Letter
Received non-conforming observations from an FDA audit (483)
Thinking about implementing a Corrective Action or Product Recall... Read More
Master Bond Inc. offers a wide range of versatile, high performance epoxy formulations designed to withstand the severe conditions found in cryogenic environments. They are available as one or two part systems, requiring either ambient or elevated temperature cures as specified below. When fully... Read More
Ascend Frequency Devices offers a wide variety of crystal products, including all the industry standard packages, thru-hole or surface mount. This enables our products to be used in most all applications. Our precision engineering capabilities enable us to offer specifications that exceed... Read More
The CS Series extrusion blow molding systems from Rocheleau, including the CS-1 & CS-2, are designed with a modular format to accommodate a multitude of container sizes, shapes and packaging needs. These systems are designed to meet customer demands with consideration of productivity, space and... Read More
Whether your testing is for R&D, clinical trials or ongoing stability, our stability chambers provide a stable, temperature/humidity conditioned environment for worry-free operation with a control system that is easy to use and saves you time.
StableClimate® II stability chambers are available... Read More
Our Testing Laboratory is your one stop solution, whether you need to provide validation of your product's test results or need a test laboratory to handle overflow during your peak testing periods. CSZ is your one stop testing solution - one company that can meet your test chamber equipment,... Read More
Our Test Laboratory offers a variety of shock and vibration testing services for testing a wide range of products across many industries. Automotive components are tested to simulate the effect of road conditions. Other products may be exposed to vibration during transportation until they reach... Read More
Current transformers (CTs) are used for measurement of electric currents and can be known as instrument transformers. When current in a circuit is too high to directly apply to measuring instruments, a current transformer produces a reduced current accurately proportional to the current in the... Read More
Excellent for High-Temperature Applications
Integrated Magnetics carries a large inventory of licensed, alnico magnetic materials in both standard & premium grades.
Integrated Magnetics designs and builds custom alnico magnets, and magnetic assemblies, manufactured to meet your specialty... Read More
We can custom-manufacture plastics using a wide variety of antimicrobial and antibacterial technologies, from Microban® antimicrobial product protection to more traditional Silver Ion based microbial resistance.
Custom manufactured antimicrobial plastics can be used in any application where... Read More
Epec Engineered Technologies is a full service custom battery pack manufacturer, with extensive experience with Lithium ion, Lithium polymer, Nickel metal hydride, Nickel cadmium, Sealed lead-acid, lithium primary and alkaline battery packs and assemblies.
We are a full service custom battery... Read More
Custom indicator labels are a convenient, cost-effective option for manufacturers who wish to combine a sterilization indicator with an existing label. These custom indicators can be any size or shape, in roll or sheet formats, and are designed for application directly to an existing label,... Read More
American Swiss Products has been specializing in high precision, Swiss screw machine parts for over 60 years. Equipment includes Swiss CNC, Multi-spindle, Escomatics as well as high speed Swiss Automatics. Micro miniature components with diameters down to .0025 in. High precision components... Read More
Central Machines, Inc. designs and builds custom automation, testing and inspection assembly equipment. We provide turnkey operation from full engineering design, custom machine shop fabrication and manufacturing, assembly, wiring, programming, installation, and training and service. Our designs... Read More
We manufacture custom dimensional gauging either to your drawings or can work right the drawing of your part. We are Certified to ISO 9001 and are ISO 17025 Accredited in the fields of Calibration and Testing.
We also do 3 dimensional inspection via our 2 DCC CMM's
Our largest machine... Read More
We build custom equipment for the GMP regulated environment
- medical device, diagnostics, and drug-device combination products. Additionaly, Keller provides equipment validation and documentation services. Read More
Fabri-Tech performs a number of custom die cutting and custom converting services. These processes help us create products and parts to match our customers’ exact design specifications. Working you’re your design drawings, CAD files, or even just loosely formed ideas, we can produce parts that... Read More
Integrated Magnetics carries a large inventory of permanent ceramic & flexible magnetic materials in both standard & premium grades. We design and build custom ceramic and flexible magnets, manufactured to meet your specialty requirements. Request for quote or contact us today for more... Read More
AmTech International – Custom Gear manufacturing services are optimized for mid-high volume production usage, high quality gears, parts and transmission gear assemblies to OEM customer specifications. Our goal is to be the OEM Supplier choice that is the most stress free to do business with. Our... Read More
With over 2,000 custom heater designs there is a good chance that we've made something similar to the heating solution you seek.
Tutco Farnam offers the very best in design and engineering of custom heaters and heating elements. Our capabilities are ideally suited to meet demanding production... Read More
We are a custom mold specialist, providing industry leading mold manufacturing techniques for the plastics industry. Our project management service to our customers is second to none. We are focused on handling every aspect of your product needs, featuring aluminum, hybrids and steel custom mold... Read More
Weiss-Aug provides custom insert, reel to reel and over-molding. Utilizing Scientific molding principles through the RJG edart system and complex sensoring systems, we provide customers with defect free products. We process all thermoplastics including high temperature and biocompatible resins.... Read More
GCI offers 10 color web printing utilizing rotary screen, UV and water based inks for flexographic printing. GCI uses a direct-to-plate process to ensure time savings and consistent high resolution 10 color quality.
For all of their processes, GCI offers secondary services including foil... Read More
Fabri-Tech offers custom label printing services. Using our automated Letterpress machines, we can create custom labels to meet the needs of your project. If you would like to add technical information to your parts and components we also feature part number, UL, and barcode label printing... Read More
GCI produces pressure sensitive labels and other custom labels for the food, wine, chemical, health and beauty, industrial, medical and nutraceutical industries. See below for a sampling of our custom label types:
Pressure sensitive labels
HBA labels... Read More
Our design and manufacturing capabilities result in a custom load cell that is all yours. We have qualified machining vendors available at moments’ notice as well as an in-house machining department. Capacities are yours to choose and in-house NIST traceable calibration is available.
Our custom... Read More
We utilize advanced equipment to enable us to produce parts that were not possible several years ago. With the availability of additive manufacturing technology, we can dramatically reduce the prototype cycle. Our experienced Engineering staff coupled with our skilled manufacturing technicians... Read More
Multispindle and Single Spindle Automatic Screw Machining from 1/16" to 2 11/16", CNC Turning to 10" and
Milling, Drilling, Broaching, Bending, Thread Rolling, Centerless Grinding, Punch Press Work & Light... Read More
Our core business is manufacturing complex magnetic assemblies and electro-mechanical assemblies. Integrated Magnetics designs and builds Halbach arrays, high-speed rotors for motors, alternators and generators, magnetic bearings, magnetic couplings, high field magnetic yokes, and magnetron... Read More
Custom Medical Cases are the ideal packaging solution for the presentation, organization and protection of your valuable medical devices – from implant sales kits and instrument trays to expensive medical equipment. Cases can be designed from a variety of materials including aluminum, molded... Read More
Coast Wire & Plastic Tech, Inc. is a medical cable manufacturer dedicated to custom surgical, patient monitoring and diagnostics imaging medical cables. It manufactures custom medical cable solutions for global device and contract manufacturers looking to outsource their high-reliability medical... Read More
Axis Medical Extrusion offers a broad range of innovative solutions to meet your R&D and production needs. Whether big or small, our projects are executed with precision- in accordance with the highest quality standards for the medical device industry. When you work with Axis Medical Extrusion,... Read More
Dravon specializes in manufacturing custom bags that meet the needs of some of the world's largest health care providers. Typically, bag uses range from blood handling and long-term storage, such as freezing, to a wide variety of drainage and fluid administration. Dravon's bag making... Read More
Coarc Manufacturing offers plastics injection molding services including product development, injection mold sourcing and plastics injection molding, using a broad range of commodity, engineered, and high-performance resins with molding presses from 35 to 440 ton capacities.
Coarc Manufacturing... Read More
Full service plastic injection molding company located in Michigan. For over 30 years we have been a manufacturer of plastic molded parts for medical devices and plastic substrates for EIA/RIA and DNA PCR serving many leading medical and diagnostic companies worldwide. ISO 13485, Class 8... Read More
BIT Analytical Instruments's custom medical instrument R&D and design services begin with identifying the client's unique projects tasks and coordinating a team of selected engineers and specialists from among its experienced global product development team. This team consists of more than 70... Read More
Custom optical elements as small as 0.20 mm for use in laparoscopic, endoscopic and other medical devices. They can be custom engineered, ground and polished to micron tolerances in a wide variety of configurations, including lenses, prisms, axicons, filters, windows, domes, and mirrors, as... Read More
Custom Mold Bases manufactured complete in Harrisburg, Pennsylvania USA completely machined to customer specifications ready for cavity & core and axulliary parts, saving the Mold Maker hours of labor and $$ Read More
Each mold is custom designed and built in-house at Micro Mold. Our mold designers and engineers can create an initial blueprint and quickly react to any changes that may occur with respect to the part design, material selection or cavitation by utilizing multiple seats of computer aided design... Read More
Our experienced mold makers at ABERDEEN deliver world class quality every time. Molds with extremely critical tolerances are routinely fabricated in our tool room, including both prototype and production molds. Complex parts involving internal passageways, such as multi-lumen catheters with... Read More
Precision Associates, Inc. (PAI) offers engineering services from initial part design to final delivery of custom molded rubber parts. If you need a standard O-ring, lip seal, gasket rubber-to-metal or other custom seal shape, we’ll manufacture the product you need to your exact... Read More
Axis Medical Extrusion offers a broad range of innovative solutions to meet your R&D and production needs. Whether big or small, our projects are executed with precision- in accordance with the highest quality standards for the medical device industry. When you work with Axis Medical Extrusion,... Read More
Nutraceutical labels, also called nutrition labels, are in strong demand due to the competitive and ever-changing nutritional industry and regulatory aspects. GCI’s experience can help customers develop label processes to meet these challenges.
Advantages of Working with GCI:
Recognized... Read More
Ampco, together with our subsidiary, MTM Pacific Ltd, China, have been serving the OEM (Original Equipment Manufacturers) market locally, nationally and internationally for over 40 years, with the in-house engineering depth, and the offshore flexible tooling facilities, to design, prototype and... Read More
Specialty Plastics Inc. is an ISO certified custom plastic injection molder located in the St. Louis, MO area. We have 21 state of the art injection molding presses and due to low overhead, are able to offer low cost plastic moldings, along with tight tolerances and excellent customer service.... Read More
A variety of pneumatic components are used throughout the medical device industry due to the cleanliness of compressed air in comparison to hydraulic oils. When developing custom products for use in these applications, Pneumadyne engineers can often consolidate these components into a manifold... Read More
AVENTICS is fully committed to adapting, customizing and integrating our technology to match the precise criteria you set. Whether it takes a completely new development, or minor but crucial modifications to existing products to meet specifications, we have the capacity and engineering resources... Read More
Building on a comprehensive line of existing Industrial Grade and Military Qualified rugged power supplies (including switching and linear power supplies in AC/DC, DC/DC and DC/AC power supplies), Martek Power's value-added power supplies utilize field proven designs for ruggedness and fast... Read More
Medco Products is experienced in both short and long runs for a variety of applications. We are a full service custom molder. Our expertise ranges from critical tolerance engineering components to standard consumer commodity products. We are capable of producing all of the latest engineered... Read More
Apartis can help you develop custom results analysis software to precisely control your assay workflow and deliver a fully documented design history file (DHF) to support your regulatory submission (FDA, IVD, 510k, etc.).
We've designed and developed results analysis software for many clients... Read More
Screw Machine Production Equipment
Precision Swiss CNC Lathes
Multi-spindle Cam Automatics
CNC Multi-axis Machining Centers
In-house Tooling Facility with Wire EDM CNC Form Tools*
*All managed under the control of an Esprit CAD/CAM system to support the most intricate geometries and... Read More
Strain Measurement Devices is a world leader in sensor technology, working in partnership with our customers in a wide range of industries. We develop and manufacture custom sensors to solve measurement problems in medical, aerospace, and industrial applications.
Some examples of custom... Read More
We designed a custom solution for a client that specializes in air conditioning systems and environmental control equipment for a variety of industries that are installed worldwide.
PROJECT & CHALLENGES
The client was experiencing heater failures in a line of medical equipment.
They were... Read More
Tutco Farnam helped a medical CT Scanner manufacturer improve the quality of their scanned images.
PROJECT & CHALLENGES
CT scanner image quality can be greatly improved if the internal temperatures of the apparatus are constant and stable throughout. This permits the scanner to focus to the... Read More
A newly designed Blood Analyzing Instrument required a very specialized miniature air heater and very precise performance. No Instrument had ever performed a process like this and there had never been a heater like this.
PROJECT & CHALLENGES
Our client needed to develop a very small precision... Read More
PROJECT & CHALLENGES
Our client wanted to design a very compact warming product for use in operating rooms worldwide. Marketing indicated that there would be very great acceptance of the device if it could be very small. The heater needed to ramp up in stages, and the product had to be very... Read More
American Swiss Products has been specializing in high precision, Swiss screw machine parts for over 60 years. Equipment includes Swiss CNC, Multi-spindle, Escomatics as well as high speed Swiss Automatics. Micro miniature components with diameters down to .0025 in. High precision components... Read More
Chemir Analytical Services offers custom synthesis services to support contract research and development for many different industries. Our team provides organic synthesis of compounds at the milligram to kilogram scale. We can handle difficult chemical synthesis projects that require fast... Read More
A company manufacturing a medical test strip required a special laminating and coating system. The system was required to accurately control the tension of the web and two additional cover layers. A high viscosity material needed to be accurately coated on each layer of film... Read More
Your steerable catheter concept has promise, but needs help with the handle design to make it great. Work with the experts™ at Teleflex Medical OEM for ergonomic handles that offer precise control over the orientation of the catheter tip. Whatever your handle design demands, we have the... Read More
Do you need a custom-built scope that other manufacturers can't (or won't) make for you? Take advantage of our 40-plus-year history as a manufacturer of robust, high precision remote viewing devices.
Traditional scope designs employing rigid or fiber optics
Video based designs using CCD or... Read More
Add visualization capability to your medical device - Will your device perform better if you could see what it is doing and where it is going? Don't operate blindly; add eyes to your medical device!
Integrate optical trains or camera systems into your medical device
View... Read More
These cut to length units are simple and easy to use. Just enter the length and quantity on the color touch screen. The unit automatically feeds, cuts, and counts the pieces to meet your requirements.
For an automated one-shot process, this unit will feed and cut the material on-demand.... Read More
Cymatix offers a line of brushless motors in NEMA sizes 17, 23 and 34 with optical encoder and brake options. In addition, we provide value-added services including connectorized motors, motor-brake and motor-brake-encoder assemblies, motor-gearhead assemblies, connectorized sensors, and other... Read More